26mm scope rings

Pre64guy

AH member
Joined
Jul 4, 2025
Messages
16
Reaction score
2
Are there any European hunters or international hunters on here that may have any 26mm Redfield or Leupold scope rings. Looking for medium height, would love to find a medium height with front extension. I have a vintage Karl Kahles-Wien 39, 3x9 in mint condition I'm wanting to put it on my pre-64 model 70 (1951) 300 H&H. Thanks
 
I had a set that I took off a pre 64 model 70, I’ll look when I get home from the gun show I’m at and see if I can find them and I’ll let you know. If I can find them, you can have them for what the postage would cost.
 
I finally found the box that I put them in. They look to be low rings in my opinion and not sure if they’re configured the way you want them, but you can have them for the cost of shipping if you want them.
 

Attachments

  • IMG_8711.jpeg
    IMG_8711.jpeg
    669.3 KB · Views: 37
  • IMG_8710.jpeg
    IMG_8710.jpeg
    735.2 KB · Views: 36
  • IMG_8709.jpeg
    IMG_8709.jpeg
    697 KB · Views: 35
I'll take them. I think they're medium. Let me know what the cost of shipping will be and if you are willing to take a check I can mail it to you. Once the check clears you can mail them to me. Thanks a lot
I'll just need your name and address.
 
I finally found the box that I put them in. They look to be low rings in my opinion and not sure if they’re configured the way you want them, but you can have them for the cost of shipping if you want them.
Does anyone have another set like this. I have a similar scope that I would love to get rings for to add to my 1958 model 70 338 wm
 
If you have access to a machinist or gunsmith you can have them open a set of 1” by .060” and they will be 26mm. I have done this couple times already
 
If you have access to a machinist or gunsmith you can have them open a set of 1” by .060” and they will be 26mm. I have done this couple times already
You're right. I have had someone else tell me that. And that's an option. I may do that if I don't fine what I'm looking for. Thanks for responding.
 
I finally found the box that I put them in. They look to be low rings in my opinion and not sure if they’re configured the way you want them, but you can have them for the cost of shipping if you want them.
I'll take them. PM me and I'll send you my address.
 

Forum statistics

Threads
67,132
Messages
1,488,310
Members
144,149
Latest member
ZFMWinona
 

 

 

Latest posts

Latest profile posts

rayford445 wrote on Hunter-Habib's profile.
Good afternoon,

I'm trying to get in contact with Mr Butch Searcy. I have the opportunity to buy one of his rifles chambered in 577 nitro Express however the seller does not have any of the paperwork with the information about what ammunition or bullet weight was used to regulate it. I know he is not making firearms anymore but I wanted to reach out after seeing one of your post about him.
Daryl S wrote on mgstucson's profile.
Hi - the only (best) method of sending you the .375/06IMP data is with photographing my book notes. My camera died so the only way I can do it is with my phone. To do that, I would need your e-mail address, as this
new Android phone is too complicated to upload to my desk computer, which would be easier and to down-grade, reduce the file sizes.
Best wishes
Daryl
Golden wildebeest cow cull hunt

swashington wrote on Hyde's profile.
Hey Steve, This is Steve Washington we met at KMG last year. I am interested in your Winchester. Would love to speak with you about it. I work third shift and I cannot take a phone with me to work. Let me know a good time to call during one of your mornings. My phone is [redacted]. Live in Florida so I have to account for the time difference.
Look forward to hearing from you.
Ray B wrote on woodsman1991's profile.
Hi @woodsman1991 -
I'm Ray [redacted]

Reply with name/address and I'll get a check into tomorrow's mail.
 
Top