Trying for pics on the barrel cooler

M70375!

AH enthusiast
Joined
Mar 8, 2024
Messages
451
Reaction score
547
Location
Wyoming
Media
9
Hunting reports
Africa
3
Hunted
Botswana, Mozambique
IMG_1385.jpeg
 
Did you notice a big difference? I've seen those before and just wondered if they help.
 
Oh yea, works great, for $15, not much to lose
 
I use an electric air pump for inflatables ($20). It has an on board rechargeable battery and I attach the output to some rubber tubing. I bring lunch bucket cooler with some ice in it. When I'm ready to cool the barrel, I put the downstream end of the rubber tube in the chamber, turn the pump on, set it on the ice and close the cooler lid (of course it doesn't close completely because the air hose is coming out of it). It actually makes the barrel cold, first at the breach and then at the muzzle.
 
I use an electric air pump for inflatables ($20). It has an on board rechargeable battery and I attach the output to some rubber tubing. I bring lunch bucket cooler with some ice in it. When I'm ready to cool the barrel, I put the downstream end of the rubber tube in the chamber, turn the pump on, set it on the ice and close the cooler lid (of course it doesn't close completely because the air hose is coming out of it). It actually makes the barrel cold, first at the breach and then at the muzzle.
Do you worry that cooling it too quickly could have a negative effect? I’m thinking of what happens when you dunk hot metal in cold water.
 
No. It's cold air. You will discover that you can get the barrel quite cool near the breach with the muzzle still hot but I don't push it. I fire 2 to 4 rounds, then cool, then wait a minute or two for the temperatures to average out a bit, then back to shooting. It beats the heck out of sitting in the pickup with the AC blowing on the barrel on a hot day.
 
This is not a bad idea at all. Several of the ranges I used in Germany (specifically MSZU in Ulm) used them. There were hoses by the rifle rack, after a relay you would place the rifle in the rack and add the hose. The compressor was always on, so it was a good way to keep the rifles cool as the day went on.

Did not use the ice in the cooler though. Just moving air. Works to keep Porsches cool, so why not?
 
I use a similar setup with just an small air pump and plastic tubing for about 30 secs with tubing placed into the cartridge chamber and when the air isn't hot anymore I turn it off and wait another min or so and commence firing again.
 
I use this exact setup - works great!
 

Forum statistics

Threads
65,052
Messages
1,434,168
Members
134,082
Latest member
JoeRincon
 

 

 

Latest posts

Latest profile posts

Mauser3000 wrote on HBartley's profile.
Hello,

I saw your post selling left hand rifles. Do you have any additional pics of the .416 Rem mag?

Thank you.

-Nathan
Mauser3000 wrote on gbflyer's profile.
Hello, I saw your post selling left hand rifles. Do you have any other left hand rifles you may let go of? Also can you send a few additional pics of Borden rifle?

Thank you.

-Nathan
DaBill wrote on Fzj80's profile.
DaBill wrote on Dakota300's profile.
I have a question about your scope. Is the Innomount an SR-to-Picatinny mount?
Bill
robi wrote on Cheesehead's profile.
I sounds like a very Dutch name "Kaaskop":E Laugh:
 
Top