Water for ducks

3chunter

AH veteran
Joined
Aug 21, 2024
Messages
147
Reaction score
325
Media
4
Member of
SCI
Ideas on best way to get water from this well so I can then use pvc hose to pump/run water 375 ft to duck hole?
Flooding 2 acres.
IMG_9424.png
 
Last edited by a moderator:
If you have access to a tractor, fit a PTO driven pump on it. That is just a guess.
You should be able to find a 2” or however big you need PVC hose at a Co-Op

You also may have to pull the screens and clean or replace them.
 
The potential problems I see are 1) the pipe is set in concrete and 2) it doesn't appear very big. Is it a shallow depth sand point? May be plugged on the end. The most efficient pumps are submersible but they require electricity and a casing. Does not appear this pipe is wide enough to be casing, i.e. slide another pipe down in it with submersible attached. Be interested to know how it turns out. I think it's gonna be an expensive proposition.

Wait. What's the other thing with the blue hose outlet? Is that some kind of pump or regulator?
 
Last edited:
I can only speak for wells around here, but you would suck one dry before you could flood two acres. Most guys use diesel powered or PTO pumps with what looks like 5 or 6 inch lines straight from the river or large creek.
 
We are 45 ft above sea level here. My uncle pumps water in his pond from same size pipe but he has power and all.
 
I’m 12’ above sea level and used to maintain a 1 acre rice field with a 2” gas powered pump. No way I could fill the pond with it but after a good rain I could maintain the water level pretty well . I tried to keep 4-6 inches on the rice.
 
Lot of factors, but just a few basic numbers, it would take over 160,000 gallons of water to cover 2 acres with 6" of water. Lets say its a 2" well, lets guess flow rate of 10-gallons/min it would take about two weeks to pump that amount of water given the aquifer would withstand the withdrawl...and that does not factor in evaporation or seepage.
 
  • Like
Reactions: RLL
Lot of factors, but just a few basic numbers, it would take over 160,000 gallons of water to cover 2 acres with 6" of water. Lets say its a 2" well, lets guess flow rate of 10-gallons/min it would take about two weeks to pump that amount of water given the aquifer would withstand the withdrawl...and that does not factor in evaporation or seepage.
2” well would be a jet pump. I don’t know of any jet pump that’s going to move 10gpm. I’d guess 3-5 at best.
Pan evaporation can be a tenth or two per day.
 
I think it would be a LOT cheaper to book off work a week or two and fly to Manitoba or Saskatchewan for waterfowl hunt. You'd shoot more geese and ducks than most guys can bag over a couple hunting seasons in the lower 48. The skies turn black and the noise from birds will leave your ears ringing for a week afterwards. No exaggeration. Been there and done it.
 
I think it would be a LOT cheaper to book off work a week or two and fly to Manitoba or Saskatchewan for waterfowl hunt. You'd shoot more geese and ducks than most guys can bag over a couple hunting seasons in the lower 48. The skies turn black and the noise from birds will leave your ears ringing for a week afterwards. No exaggeration. Been there and done it.
I duck hunt outwest every year for atleast a week. I actually found another well that I had forgotten about. So I have 2 wells.
 

Forum statistics

Threads
63,341
Messages
1,393,368
Members
123,720
Latest member
ByronX8943
 

 

 

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on 0777446998
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top