H4350 vs Varget for 400 H&H

These North forks are long. As it turns out out I only have about 1lb of target but I have 4lbs of H4350. A lb of Varget is over $100!!!! I was worried about case capacity but I think I will be compressing H4350 after all. I recall that the Lee manual claims a compressed load is more consistent. The I am not getting great accuracy (1.5” @ 100 yards) yet but the velocity is much faster. I am at about 2400 fps. I believe max load for H4350 is 82gr and I am under that still with no signs of pressure
Ok good deal, I appreciate the insight and I’m sorry the Varget is as much as a kidney!
 
Ok good deal, I appreciate the insight and I’m sorry the Varget is as much as a kidney!
Yeah it’s absolutely insane. It used to be about $60 not so long ago.
 
SkullKeeper,

Yes, I use a drop tube, carryover from shooting black powder Sharps rifles, I think it settles in all powders a lot better, you can get a drop tube from Buffalo Arms or Shiloh Sharps.

A few cartridges I drop tube for:

358 Winchester, TAC, 200grs, 2700 fps
35 Whelen, H-4350, 310grs, 2410 fps
9.3-62mm, RL-17, 320grs, 2400 fps
400 Whelen, CFE-223, 400grs, 2255 fps
400 H&H, Varget, 400grs, 2400+ fps
416 Taylor, CFE-223, 400grs, 2400 fps
458 Winchester, 2460, 400-500grs, 2600 and 2300 fps.
 
I just got 2 pounds from Powder Valley for about $60 each (they had free hazmat)
I am in Canada. Unfortunately I think that’s USD. So about 82 CDN?
 
SkullKeeper,

Yes, I use a drop tube, carryover from shooting black powder Sharps rifles, I think it settles in all powders a lot better, you can get a drop tube from Buffalo Arms or Shiloh Sharps.

A few cartridges I drop tube for:

358 Winchester, TAC, 200grs, 2700 fps
35 Whelen, H-4350, 310grs, 2410 fps
9.3-62mm, RL-17, 320grs, 2400 fps
400 Whelen, CFE-223, 400grs, 2255 fps
400 H&H, Varget, 400grs, 2400+ fps
416 Taylor, CFE-223, 400grs, 2400 fps
458 Winchester, 2460, 400-500grs, 2600 and 2300 fps.
Very good to know, I’ll order one of those drop tubes. Thank you again!
 
To get good, consistent powder packing on loads I use a technique recommended by Mic McPherson - swirl charging. I use an aluminum funnel and swirl the powder while dropping it from the scale pan. I seldom get powder jamming in the funnel and get better capacity / packing in the case. Takes a second or two longer that just dumping the powder into the funnel, but I don't have to stop and deal with jams or use tubes.
 

Forum statistics

Threads
62,597
Messages
1,374,930
Members
120,472
Latest member
Tdub910
 

 

 

Latest profile posts

Huntergene wrote on SCmackey's profile.
The pictures have been sent.
Mwag wrote on Juan Loco's profile.
I'm interested in Merkel
Where in MO are you located?
I have an unfired T rex 577 if anyone is interested in acquiring it . Absolutely spotless, flawless and well kept . It's rare as it gets . Mouth watering ? Let me know if you feel like making an offer .
Mr Brown in Calif.
Nevada Mike wrote on 50reloader's profile.
I need to know if this is legit. Photo with today's paper would do it.

Thanks
Monster Impala for Ricky with his trusty bow !
01696dfa-f596-4f46-aafa-2d37c38f3493.jpeg
 
Top