Want To Buy Husqvarna 9.3x62

[DobeGrant45c]

I’m on the hunt for a Husqvarna in 9.3x62 ideally a M46 or 640. Not worried about finish wear as long as it has a good bore and in usable condition. Any loading components would be welcome as well.

 

[19_A_CPT]

https://www.gunbroker.com/item/1110766794

Here's one I've sorta been watching. He has a few of them.

 

[93marlin]

https://www.gunbroker.com/item/1110766794

Here's one I've sorta been watching. He has a few of them.

I believe that one is a rechambered 9.3x57 judging by the caliber markings.

 

[coreydb]

Recommend searching Gunsinternational.com. Huskys are rare but excellent rifles and are like Timex watches; they take a lickin' and keep on tickin'

 

[DobeGrant45c]

Recommend searching Gunsinternational.com. Huskys are rare but excellent rifles and are like Timex watches; they take a lickin' and keep on tickin'

Thanks for the reply! I’ve checked most of the usual places, mainly just curious if anyone on here had one they didn’t mind moving.

 

[Atticus]

Did you check Simpsons? They have some—most need some work but there is often the odd very nice one.

 

[MontanaGrant]

I second simpsons. Some have cracks but there’s often sound ones as well. Check twice a day as good ones often only last a few hours. The time taken is worth it as even their sound good rifles are much cheaper than when they reappear on gunbroker.

 

[Grandpa Moose]

Have two of them but here in Canada

 

[DobeGrant45c]

Did you check Simpsons? They have some—most need some work but there is often the odd very nice one.

I did. Decent selection at times, but as mentioned below they move fast. I seem to find myself a day late and a dollar short when they appear.

 

[wyattcm95]

I do have a 9.3x57 Husqvarna I’d sell. It would need reamed out but should be a simple thing. It’ll be $575 plus the shipping and everything. I don’t have pictures but I can get them.

 

[19_A_CPT]

I believe that one is a rechambered 9.3x57 judging by the caliber markings.

Yes he tells the history in the listing I believe. In one of his listing's he does

 

[jruby]

I have a husqvarna model 146 that started life as a 9.3x57. Ran a new 9.3x62 chamber and shoots well. Put a leopold 2-7 on it. It's a good rifle that found it's home.

 

[DobeGrant45c]

I’m on the hunt for a Husqvarna in 9.3x62 ideally a M46 or 640. Not worried about finish wear as long as it has a good bore and in usable condition. Any loading components would be welcome as well.

My apologies for any confusion, I meant to put 146 instead of M46. Looking for a husky built on the Model 98 action.

 

[ThreeJacks]

I looked earlier today, Simpson's had several Husqvarna 9.3x62. Not sure if they are what you are seeking.

 

[Rifleman97]

Huh I didn't know huskys were sought after. I saw one for 550 at cabelas a month or two and put it back on the rack as I didn't really put much value in it personally. When I was there the other day I didn't see it so I'm assuming it sold

 

[jruby]

Most of the huskys through the 640s were built on FN actions. I can think of few better pedigrees than the FN mauser.

 

[Hammergun]

I bought a Husky 146 from Simpsons. Had it rechambered from 9.3x57 to 9.3x62. Large ring 98 action. I bedded the action and added two Talley crossbolts. Put a 2-7x scope on it and took it to Africa. It's my favorite rifle.

 

[SCmackey]

There is a custom available at https://www.hallowellco.com/ed_lapour____custom_husqvarna_9-62.html

 

[Fzj80]

Pm sent

 

[jruby]

Beautiful rifle. I would have a problem hunting with it due to fear of dinging it.