1st time hunter needs help...

I have only shot a 308 lever action and 375 H&H...Never ever had my own.
Love and fully understand what you say and thanks a million. You surely know your stuff!! Can't wait to get shooting.
 
Can everyone help me on how to see what year model this rifle is please
IMG-20150507-WA0005.jpg
 
Good advice given by Hunthard safaris here sir. He has outlined solid considerations for you.
 
You don't give the manufacturer name or model eg. Musgrave 2000. It may be a Mauser action,but could have been rebarreled or redone by a factory eg. Vektor. You will have to give more info.
 
Hi Cornelius. A very important question is, are you going to reload or buy ammo? If buying ammo is your choice, the 30-06 is better as you are able to purchase 200 and 220gr rounds for the 30-06 (if you are going after blue wildebeest, zebra or eland). The 308 is slightly more limited as to the bullet weight you can buy, mostly will only be able to buy up to 180gr.

Second point is when working the gun, the bolt action must always feed reliable rather than smooth. the K98 / mauser action on the CZ is a controlled feed action, always picks the round from the mag and pushing the "locked" round into the chamber. It is nearly impossible to open the bolt without reliably extracting the round. The tikka is a "force" feed action, the round is only locked into the bolts extractor after its is pushed into the chamber, it sometimes happen when you need to reload fast that you only half cycle the bolt and in the heat of the moment, you open the bolt again and the round remains half chambered and is not extracted, thus your second attempt to cycle the next round cause a jam, one round in the chamber and second half sticking of of the mag and jamming against the first round.

this is an extremely important point when hunting dangerous game, but walking up to a "downed and dead" blue wildebeest that suddenly arise from the dead will not be far behind....

Just something to consider. I own both and love both calibers and rifle makes.... wont go wrong with either!
 
I have phoned musgrave and they dont have any details on the rifle.
I have a loader kit.So i think i wil be looading myself.Wil just buy the "dies" for the calibre. Thanks guys
 
I see on the barrel it is a model 98 and on the other side is the 3006 k98 0132...is it then maybe a rifle made in 1998?
 
the k98 is the type of action, also referred to as a model 98
 
is there any other markings on the barrel (name, etc...) will normally be on the top side of the barrel, if possible send foto. this will help to tell if it was made in Ermelo or earlier in Bloem
 
it doesn't look like a Musgrave. they normally write their name on the barrel, will be in front of the sights
 
Not sure.Went googling the musgrave and the 3 marks on the right That looks like antlers is a trademark.Its what they say anyways
 
Can't see that it would be a Musgrave,front of the action has either been extensively machined or replaced. Musgrave retained the original round shape of the action.
Buy new,buy once and you have a guarantee if something goes wrong,too much money to spend on a iffy rifle.
Problem rifles are a dime a dozen, save yourself some trouble and buy new.
 
the antlers in you previous picture is the proof mark. if this is a Musgrave, most probably built by Vektor (after the factory closed in Bloem, moved to Pretoria and rifles was built by Vektor) If rifle was built by Musgrave (Bloem) or JJ in Ermelo, there will be a name "Musgrave" engraved in the length on the barrel on the top.
 

Forum statistics

Threads
66,946
Messages
1,483,635
Members
143,200
Latest member
CindyMadri
 

 

 

Latest profile posts

Daryl S wrote on mgstucson's profile.
Hi - the only (best) method of sending you the .375/06IMP data is with photographing my book notes. My camera died so the only way I can do it is with my phone. To do that, I would need your e-mail address, as this
new Android phone is too complicated to upload to my desk computer, which would be easier and to down-grade, reduce the file sizes.
Best wishes
Daryl
Golden wildebeest cow cull hunt

swashington wrote on Hyde's profile.
Hey Steve, This is Steve Washington we met at KMG last year. I am interested in your Winchester. Would love to speak with you about it. I work third shift and I cannot take a phone with me to work. Let me know a good time to call during one of your mornings. My phone is [redacted]. Live in Florida so I have to account for the time difference.
Look forward to hearing from you.
Ray B wrote on woodsman1991's profile.
Hi @woodsman1991 -
I'm Ray [redacted]

Reply with name/address and I'll get a check into tomorrow's mail.
Boela wrote on Slider's profile.
Good day, Slider.

Do you by any chance have any 500NE brass left that you are willing to part ways with?

Best regards,
Boela Bekker.
 
Top