Search results

I have a Bergara B14 in 6.5PRc with threaded 24” barrel that I’d like to sell. I’ll take $1100 shipped for the rifle, Leupold 1.75-6x Vari-X III scope, die set, some brass, and a selection of 6.5 bullets in the 140gr range. I’ll take $850 for the package without the scope. If the rifle sells...

Just looking for some brass. 20 to 40 pieces. And a die set to get started with a new rifle. Thanks for your help! RC

I have a custom Mauser 338 WinMag built on an FN commercial action. It has a Timney trigger with integrated safety, factory, hinged, bottom metal, and one standing and two folding leaf express sites. Typical dings in stock from having been hunted but in very good, solid condition. See pics for...

I’m looking for 20 or so pieces of 404 brass. Once, twice, or more fired is fine. Thanks! RC

I found eight pieces of new 600 nitro brass that I have no need for. I’ll take $100 shipped for the brass. It comes in an XL J&J 20-cell box, which have been unavailable for some time!

I have just received a new die set and I went through my 577 reloading materials looking for surplus that I don’t need. I will sell the entire package below for $800 shipped in the US. 4 boxes of 25 each Woodleigh Weld-core 650gr BPE bullets, 19 pieces of new Bell basic 577 brass, 7 of which...

I am looking for a Steyr AUG factory optic for the new A3M1 rifle. I would prefer the old school sleek type known as the STG77 type but any type will do. Thanks, RC

Greetings, I went through some of my medium bore loading components and found a few things that I don’t need. One full box of 50 Hawk 7mm 160 grain 0.035” jacket $45 shipped One full box of 50 Woodleigh 375 cal 235 grain Weldcore bullets $75 shipped 2 overfull boxes of Barnes Original 9.3mm...

I am looking for 100-200 pieces of 458 Win Mag brass. Make is not important and once-fired is fine. Please let me know what you have for sale. Thank you, RC

I dug through my bullet stash and found some Woodleigh Weldcores in 458, 480 grain for the 450 Nitro. I paid dearly for these last year. I don’t plan to hunt dangerous game with my 450 so I figure Ill Send these rare bullets on to someone who has a need for them. I’d like a couple of boxes of...

I am always looking for examples of Art Alphin’s old Dead Tough bullets. I like to use them for testing against other bonded and monometal bullets. Please let me know what you have. I’m interested in any quantity and any weight in any caliber except 0.330”, 0.423, 0.465”, and 0.488”. I can make...

I’m looking for two boxes of Swift Aframes in 0.458”, the 400 grain variety. Please let me know what you have and cost. Thank you, RC

Saving the best for last. Offered is a high grade, highly engraved 700 AHR bolt action rifle. This is the last of the rifles my friend is wanting sell. The 500 Jeff, the 600 Nitro, and this 700 will head off to the shop for consignment and likely to Gunbroker in a week. Let me know if you have...

A friend of mine is in a phase of reducing his hunting rifle collection. He said he was taking a few for consignment to his local shop soon. I told him I would post the rifles that might be of interest to the forum. Here is a Blaser R8 in 500 Jeffery. Nice wood stock. Weighs 8.8 lbs, unloaded...

I am offering for trade, a new Dumoulin Mauser action set up for 30-06-sized case head. It has the Winchester style safety, a steel adjustable trigger, and square bridges machined for QD rings offered by Sunny Hill. Included is a threaded and short-chambered Shaw number 1 contour barrel in...

I got this box of bullets as part of an auction lot and I have no need for them. One sealed box of 100 bullets. $30 shipped and they are yours. Thank you. RC

I started this project last year collecting all the parts for a 585 Nyati rifle after I obtained a 1917 Enfield action. I wanted a short range stopper shooting a 750 grain bullet at 2100 or so. I had been working with a 577 double and a single and so thought a bolt action in the 585 caliber...

I have two bags of new primed Hornady brass for 450 NE 3.25”. I would like to sell it for $165 a bag shipped for the brass I have 0.458” 480 grain soft point DGX and DGS solids for sale. There are 96 solids and 50 soft points. Also included is a partial box of 16 A-Square Lion Load 500 gr...

I have a box of 76 bulk packed, new Remington 25-06 brass for sale. This brass is about $40 per 50 pieces when it’s in stock. I’d like $50 shipped for the lot. Thanks, RC

Here is a box of 9.3x82r cases. This was a less common chambering for German drillings, singles and doubles. They seem to be very hard to find and the length makes them impossible to form from other cases. I’d like $80 shipped for this box of 20. I have 3-4 other fired cases that I will throw in...

I have 43 pieces of brand new 10.75x68 brass turned and formed from Remington 375 H&H brass. This is the best brass you will find for the caliber. Bertram brass is $85 per 20 when you can find it. I will sell these for $160 shipped via small flat rate box anywhere in the US. Thanks, RC

I am looking for 3 or 4 standard old Ruger 10/22 rifles as project guns. I’m ok with broken stocks and sights, no magazines or other broken or missing parts. Just trying to find some rifles cheaper than what I can buy on Gunbroker or what new ones cost on Black Friday deals. Honestly, if I can’t...

I decided to go through all of my components and simplify and down-size a little bit. I realized I don’t need 250 pieces of 375 flanged, 450 3.25”, and 500 Nitro! Shipping via priority flat rate is included in the prices. I’m wanting to clear this out and help folks get hard to find components...

Midsouth has clearance prices on Nitro Express and other big bore reloading components including 450 and 500 nitro brass for $1.50 a stick and 458 Lott for under $1! Bullets too for $0.50 each! All Hornady brand. Go get it! Happy Birthday to me!!

Go get them! They are priced at $0.33 apiece! RC

In a trade deal recently, I ended up with far more 450/400 bullets than I need. I have 6 boxes of Hornady DGS bullets, #4103. I’ll sell them for $50 a box plus flat rate USPS shipping. If you buy all 6 boxes I’ll pay shipping. I hope someone can use these. I have more 450/400 bullets than I...

I no longer have a 470 Nitro but I still have all of my gear for casting custom bullets for 470 as well as light for caliber bullets for practice. Included in this kit are the following: 1) Custom Accurate Moulds three cavity which molds a custom gas checked flat point of 530gr 2) Lee push...

I finally decided on a Sharps rifle. Now I need to feed it. If you have any 45-110 brass and/or a set of dies, please let me know. Thanks, RC

I have a 405 Winchester reloading package I’d like to sell. Included is a set of RCBS dies, a bag of 50 new Hornady brass, Hunters Supply 315 gr cast and coated bullets, a 3D printed loading tray and funnel, and two new boxes of ammo. The ammunition I recently purchased from gun store in South...

I recently got a Ruger Number 1 in 405 Winchester as part of a trade. I was considering punching the chamber out to 450/400 but I picked up another Ruger in that caliber. Then I considered rebarreling to another caliber. I’ve decided I’d like to wring out a Sharps or do some hunting with a large...

A couple of weeks ago, I put out an ad for custom caliber-specific reloading equipment, specifically powder funnels and loading trays for big bore cartridges. We all try to use what we can get or make our own stuff to load for the heavies. When I got my 3D printer in January, the first thing I...

A member here asked for a loading block and a powder funnel specific to 470 Nitro. I went ahead and drew them up for him. I can make loading blocks for any caliber. If you have an interest, let me know. I’ll make loading blocks for $25 and funnels for $10. You pick the colors you want. Shipping...

I just received a Remington 760 rifle and I’m looking for a 30-06 barrel for it. I’d like to trade my 270 Winchester barrel for one or I would be interested in buying one at a fair price. Please let me know what you have. I might be able to use a 742 barrel and I can just block off the gas port...

I recently got into 3D printing a while ago and have been thinking of different things to make reloading easier for me. The first thing I made was a caliber specific powder funnel for 577 nitro, Nyati, and TRex. I have friends that shoot 577s and 600s so I thought I’d make funnels for both and...

I am needing to do some load development for these two cartridges and could use some brass. Please let me know what you have. thanks, RC

Once fired brass is fine by me. I just picked up a Ruger No.1 so chambered and would like to load for it. Thanks, RC

I’m looking for some 585 Nyati brass for a project. I would take brass fired numerous times and even a few with cracked necks and shoulder dents. I’m wanting to make up some dummies and play with some dimensions for a wildcat. I could use 10-20 pieces. Thanks for any help you can give, RC

With as difficult as it has been over the past three years to find reasonably priced dies for the more common NE cartridges, I thought I’d let the forum know that Buffalo Arms has all of them in stock. I guess Hornady made another run and shipped them out. Now I hope they will make a huge batch...

Up for sale is one set of RCBS 450/400 3.25” dies. They are like new. I would like $125 shipped in the US. Thanks, RC

I purchased this scope a few years ago thinking I would find the exact BRNO rifle chambered in 7x57 to go with it. I decided to build a custom rifle on a Mauser action instead. The scope was made by Zeiss for the ZKK-600 it’s integral scope mounts. The scope has an integral mount that quick...

I have two lbs of sealed, 2022 made Alliant RL17 powder I would be happy to trade for RL15. I also have two lbs of sealed Ramshot TAC I would trade for RL15. Not interested in shipping as it is just too costly. Trades in the Central Texas area.

I have a set of medium Warne lever rings I would like to trade for a set of Talley or old school Warne Premier narrow gauge lever rings. I am building a light cape gun in 9.3x74r and 16 gauge that I need a set of lever rings to finish out. I just worked a deal with Ray Atkinson on an ultralight...

I have this very nice condition Springfield 1903A3 barreled action I’d like to sell. The bore is very good. The receiver is a National Ordnance receiver and the barrel of a Remington dated 1945. The sighting apparatus and stamped bottom metal are intact and the matte blued is nice. I thought...

The time has finally come! Its time to list my vintage 470 nitro double rifle. I started building my own doubles on shotgun actions a few years ago out of interest in the platform. I also just returned from a Buffalo hunt using my favorite 416 bolt gun and realized that the 400 calibers are all...

I would like to sell an assortment of 416 bullets as one lot. I’d like to get $215 shipped for 200 bullets. Included are the following types and counts: 27 Woodleigh Weldcores 340gr 50 Hornady RN Interbond 400gr 23 Speer Hot Core 350gr 50 Bridger banded flat point monolithic solids 400gr 50...

I know this is a long shot but years ago, numerous sellers had a stockpile of FN made barrels for the 1922 Brazilian carbine. These were new barrels measuring 19” in military profile. They originally sold for around $40 and I meant to grab a few to put away but I never got around to it. Although...

My little 7x57r single shot has become my favorite light rifle. It loves 175 swift aframes and I’ve taken two Impala with it during my recent hunt. I would like to find some more of these bullets for an upcoming hunt in Idaho. I’d be interested in partial, full, or multiple boxes of bullets. I...

I put away my last 4 copies of the Woodleigh manual thinking they might be worth a bunch more some day. I have decided to put 3 of the 4 up for sale here at $110 which is what I had sold them for over the last two months. Here is a little extra! With each purchase, I will include an extra book...

Here are two sealed boxes of Hornady 376 Steyr brass. I bought far more than can reasonably use so I figured I send some on down the road. I would like $100 for both boxes plus $16 shipping via priority flat rate.

Here are some bullets for sale to make room for other stuff I use more frequently. If you see multiple items you want, I’m happy to consider a package deal. Shipping will range between $9 and $16 for either a small or medium flat rate box depending on what you purchase. 577 Woodleigh Weldcore...