HushHog
AH member
- Joined
- Jul 3, 2019
- Messages
- 35
- Reaction score
- 21
My rifle has a dove tail rail that screws onto the rib that is drilled and tapped, but between it and the trijicon base it lifted the sight higher than I would have liked.
I did look for one of the gunsmith blank bases for the trijicon, however every place I saw was out of stock. I got a piece of scrap steel from my workplace and with a few hours of design and machining I built it.
One thing I think I'm going to like is I can remove the base without removing the sight from the base. I also left myself enough room that if I decide I want it lower I can machine the top down and drop the sight by up to another 0.050".
I'll post more pictures when I get it finished.
I did look for one of the gunsmith blank bases for the trijicon, however every place I saw was out of stock. I got a piece of scrap steel from my workplace and with a few hours of design and machining I built it.
One thing I think I'm going to like is I can remove the base without removing the sight from the base. I also left myself enough room that if I decide I want it lower I can machine the top down and drop the sight by up to another 0.050".
I'll post more pictures when I get it finished.
