Merkel 9.3x74R, looking for ammo/load advice

Stompbox

AH veteran
Joined
Feb 25, 2020
Messages
127
Reaction score
183
Location
Minnesota
Media
2
I’ve got a Merkel double rifle chambered in 9.3 x 74R that I recently started playing with. The factory target shows that it was regulated with RWS 250 grain ammunition, which I have not been able to find yet. I have only shot it with S&B, Hornady and Norma ammo all in the 285 to 286 grain range for bullets. At 100 yards I get 4 inch to 8 inch spreads with my right barrel shooting right in the left barrel shooting left, they do not cross. I’m guessing I need to find some 250 grain ammo or at least load some up with 250 grain bullets and give it a try. Does anyone have any experience with the same rifle? I appreciate any advice or assistance in the matter thank you.

A friend of mine has a Merkel over and under in the same caliber, and is having kind of the same experience I am with his bottom barrel shooting low and his top barrel shooting high and not crossing.
 
That's the problem with double with double rifles. They're pickier than children when it comes to feeding them. Even different batches of the same brand (and type) of ammunition will frequently not regulate to the same point of impact in a double rifle.

The most surefire solutions to your problem, are:
i) Hand load your own ammunition to match the specifications of the original factory regulated RWS 250Gr factory loads.
ii) Have a qualified gunsmith re-regulate your rifle for your preferred currently manufactured factory load.

These are some currently manufactured 250Gr factory loads. Try your luck with these, first:
or these:
or these:
 
Last edited:
I’ve only owned a double rifle for a couple of months….so you probably know more about them than me. Mine is a Blaser BB 97 classic in 9.3 x 74R . I also couldn’t get the ammunition for which it was regulated.

In the short time that I’ve owned her I have found that reducing the powder charge in mine increases the distance of point of impact between the barrels and that increases in the powder charge do the opposite.

And, for my rifle there is a significant difference in the difference between the POI of the barrels depending upon if the scope is attached or not.

As I’ve said I have stuff all experience with double rifles. I’ve only used 285 grain projectiles.

Good luck.
 
I’ve got a Merkel double rifle chambered in 9.3 x 74R that I recently started playing with. The factory target shows that it was regulated with RWS 250 grain ammunition, which I have not been able to find yet. I have only shot it with S&B, Hornady and Norma ammo all in the 285 to 286 grain range for bullets. At 100 yards I get 4 inch to 8 inch spreads with my right barrel shooting right in the left barrel shooting left, they do not cross. I’m guessing I need to find some 250 grain ammo or at least load some up with 250 grain bullets and give it a try. Does anyone have any experience with the same rifle? I appreciate any advice or assistance in the matter thank you.

A friend of mine has a Merkel over and under in the same caliber, and is having kind of the same experience I am with his bottom barrel shooting low and his top barrel shooting high and not crossing.
I have a similar experience with my Merkel 140 in 9.3x74 not so good in terms of bolt action accuracy, 1.5-3" at 50m. What I discovered is that shooting offhand is the key, particularly at game, my shots were 100-150m on about a dozen feral donkeys no misses & no poor shot placement. I have complete confidence in the rifle is now, my shooting mate was getting frustrated on the trip as the Merkel got away two clean shots very quickly & showed up his scope mounted Sako .338W in that environment. My rifle fits beautifully it is a real point & shoot dynamo!1
 
I just purchased a No. 1 in this round. A beautiful Medium Sporter with a 22" barrel. Can anyone enlighten me on this cartridge? It is very new to me. Thank you!
 
@Stompbox Dunno if you ever fixed the issue but if not start by seeking less "barrel time" for your projectiles. Either more/faster powder with your current bullets or lighter bullets. Short of expensive re-regulation, hand loading is usually the way forward for tuning/regulating double rifles.
With SxS configured DRs faster barrel~time closes the two poi's, slower opens them up - in most cases
(From lessons learned with my 1926 Merkel DR in 8 x 60R - ain't no factory ammo to be had for that!)
 

Forum statistics

Threads
63,426
Messages
1,395,359
Members
124,053
Latest member
RileyQup49
 

 

 

Latest posts

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on [redacted]
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top