Favor request: Anyone have quickload and quickdesign?

[rookhawk]

If yes, I was wondering if someone could run a load for me and tell me what quickload says would be the velocity?

The load I want to estimate:

55 Grains IMR4198
Federal 215 Primer
450gr Woodleigh .510" SoftPoint jacketed bullet
.500 Express 3" brass cut back to 2.800"
26" barrel

What would that result in?

Load data from "Shooting the British Double Rifle" says of a slightly different load:

57 Grains IMR4198 (***2 grains more powder than the load above)
Federal 215 Primer
440gr Woodleigh .510" Softpoint jacketed bullet (***440gr, not 450gr)
.500 Express 3" brass (***NOT cut back to 2.800")
28" barrel (***NOT a shorter 26" barrel)
=1910FPS @ 8.8TPSI

Many thanks if anyone has the estimation software to figure out what I can expect from the load. I know it regulates from my gun and I believe it is well within safe operating pressures, I just don't have any idea what the variables are going to do with the velocity.

 

[rookhawk]

This is what someone sent me as a theoretical. Doesn't it seem low to you? I was thinking 60-80fps more at least?

500 nitro for black 3”
Trimmed to 2.800"
134gr of water case capacity
18,178 psi
Muzzle Velocity 1738
26” Barrel
95% powder burn
450gr Woodleigh RN SN 06A
55 Grains powder
Energy 3017 Foot Pounds
Taylor Knockout Value 56.9
90 yard max range

500 nitro for black 3”
Trimmed to 2.800"
134gr of water case capacity
18,900 psi
Muzzle Velocity 1762
26” Barrel
95% powder burn
450gr Woodleigh RN SN 06A
56 Grains powder

500 nitro for black 3”
Trimmed to 2.800"
134gr of water case capacity
19,500 psi
Muzzle Velocity 1787
26” Barrel
95% powder burn
450gr Woodleigh RN SN 06A
57 Grains powder
Energy 3190 Foot Pounds