Cast bullets for Big Bore practice loads?

skydiver386

AH legend
Joined
Oct 18, 2023
Messages
2,916
Reaction score
11,825
Media
37
Articles
2
Hunting reports
Africa
1
Europe
1
Member of
SCI, NAHC
Hunted
South Africa, Ohio, Florida, Wyoming, Arizona
Have any of you found bare lead bullets that you can buy, or molds to use for casting that work for full power practice loads in your Big Bore rifles?

Reloading with Swift A-Frames or other DG bullets are not only expensive, but often hard to obtain, so a cast .416 or .458 caliber bullet seems like a good idea. The problem I've found is the majority of pre-made bullets are light for caliber for 458 SOCOM or 45-70, and not 500 grain, etc. I'd like something close to a full weight, full power load, without spending $110 just to buy the bullets. With some of these projectiles in very limited production, it also seems like a waste to put them into a backstop instead of using them for hunting.

I have rifles in 375, 416, 458 and may soon buy a 505. Have you loaded cast bullets for your Big Bores? Did you find any particular type or brand worked best. What powders did you use? Did you use a heavy crimp?

Winter is coming and this seems the perfect time to cast bullets and make some ammo.
 
I looked into it for my .470ne, but my rifle shoots both Woodleigh and Hornady bullets extremely well.

I was able to find a bunch of the new old stock DGS and then Midway had the DGX factory seconds on sale; so I stockpiled for much cheaper then the set up needed to mold.

Also when I used to shoot LOTS of cast .45acp I found the cleaning chore time was more than the cost of plated bullets.
 
Cast bullets can be a bit tedious to make with the molding, sizing, and then either pan lubing them or powder coating them. I would just look for sales on the cheapest jacked whatever bullet in the weight you want. I mean time is worth something right?
 
You betcha. I've been casting bullets since the mid 70s for my rifles and handguns.

For practice with my DG rifles, they are both cost effective and efficient. They cost me nothing but my time as I have a good supply of lead, tin, and linotype. I size to just over bore diameter and lube with the Alox formula developed by the NRA years ago. I get very good accuracy at sub 2 MOA from all my rifles and my 30 caliber rifles often will shoot MOA at 200 yards with cast bullets. I can probably shoot 20 rounds for the cost of one jacketed bullet.

For reduced loads, I use SR 4759 powder (no longer available, but I have a stash). For heavy loads, any of the mid-speed powders work. Get the Lyman Cast Bullet Handbook for a good review of powders for cast bullets.

The crimp that I use varies depending on the goal of the load. The heavier the load the heavier the crimp. I think that most cast bullet loads benefit from a good crimp.

I have several Lyman, RCBS, and custom molds for my various rifles. The 375 H&H gets 270 grain bullets, and the 458 Magnums get 405 to 500 grain bullets,

I've even helped regulate two English double rifles with cast bullets. That was an effort, but it worked out well.

Some photos of the 375 H&H, the 458 Winchester, and the 458 Lott with my cast bullets.
375 H&H Lyman 375499.jpg
375 H&H NOE 165 Grain.JPEG
458 cast loads.JPEG
 
Last edited:
My Big Bore range sessions, 505 Gibbs, 450NE, 458 Lott, usually starts and finishes with reduced loads.. Most of my reduced loads are loaded with cast bullets
 
You betcha. I've been casting bullets since the mid 70s for my rifles and handguns.

For practice with my DG rifles, they are both cost effective and efficient. They cost me nothing but my time as I have a good supply of lead, tin, and linotype. I size to just over bore diameter and lube with the Alox formula developed by the NRA years ago. I get very good accuracy at sub 2 MOA from all my rifles and my 30 caliber rifles often will shoot MOA at 200 yards with cast bullets. I can probably shoot 20 rounds for the cost of one jacketed bullet.

For reduced loads, I use SR 4759 powder (no longer available, but I have a stash). For heavy loads, any of the mid-speed powders work. Get the Lyman Cast Bullet Handbook for a good review of powders for cast bullets.

The crimp that I use varies depending on the goal of the load. The heavier the load the heavier the crimp. I think that most cast bullet loads benefit from a good crimp.

I have several Lyman, RCBS, and custom molds for my various rifles. The 375 H&H gets 270 grain bullets, and the 458 Magnums get 405 to 500 grain bullets,

I've even helped regulate two English double rifles with cast bullets. That was an effort, but it worked out well.

Some photos of the 375 H&H, the 458 Winchester, and the 458 Lott with my cast bullets.
View attachment 805555View attachment 805556View attachment 805557
The picture in the middle….what bullet is that? I think I have some and like to try and find the mold so I can cast myself.
 
Have any of you found bare lead bullets that you can buy, or molds to use for casting that work for full power practice loads in your Big Bore rifles?

Reloading with Swift A-Frames or other DG bullets are not only expensive, but often hard to obtain, so a cast .416 or .458 caliber bullet seems like a good idea. The problem I've found is the majority of pre-made bullets are light for caliber for 458 SOCOM or 45-70, and not 500 grain, etc. I'd like something close to a full weight, full power load, without spending $110 just to buy the bullets. With some of these projectiles in very limited production, it also seems like a waste to put them into a backstop instead of using them for hunting.

I have rifles in 375, 416, 458 and may soon buy a 505. Have you loaded cast bullets for your Big Bores? Did you find any particular type or brand worked best. What powders did you use? Did you use a heavy crimp?

Winter is coming and this seems the perfect time to cast bullets and make some ammo.
@skydiver386
If'n all else faial you can get 458 moulds that gives you up to 600gn in weight but you may have to cast your own.
Bob
 
Casting full weight practice loads for those big bores is a solid move and a lot of guys do it successfully.

Grab a good mold from RCBS, Lyman, NOE, or Accurate for 400–500 gr in .458 and similar full weight options in the others. Hard alloy wheel weights a bit of tin, gas checks if you’re pushing velocity, mid speed powders like 4895 or 3031, and a firm crimp. You’ll get plenty of cheap, accurate practice without burning the expensive DG stuff.
 
For the 458 I use two Lyman moulds. One is Round Nose 385 gr, no gas check so is for lighter loads. The other is 475 gr Round Nose with Gas Check. both weights are with #2 alloy. The 475 gr can be used to within 200 fps of the 458 full loads with very little leading of the barrel. These are fired in a Win 70 and when loaded with 3031 get very close to similar sight settings to jacketed bullets. With the lighter bullet I use 4198 for considerably less recoil but more trigger time.
 
I use cast in my various rifles from 348 on up. Casting bullets can be a hobby in itself and would lead to inexpensive practice loads.

The main issue with the 458 Win mag is understanding its unusual throat. Cast bullets are not as robust as jacketed bullets and some cast bullet designs don't work out well in full power loads. In general if you use as large a diameter bullet as will fit the throat and still chamber, then this is likely a good place to start.

For some detailed insights into 458 cast bullet designs that work in the 458 Win mag check the dedicated 458 thread on the 24 hour campfire site. It’s nearly 400 pages long and is a gold mine of info on jacketed and cast loads in the 458.
 
Last edited:

Forum statistics

Threads
71,070
Messages
1,593,449
Members
175,091
Latest member
KatieDehav
 

 

 

Latest profile posts

Mattias Stedt wrote on Bushcat Safaris's profile.
A good safari brings a great experience that fulfils your expectations, but a great safari also brings professionalism and friendship. Bushcat Safaris fills all those boxes and we have a lot of great memories from the bush with rifle in hand.
My warmest recommendation for you to plan a safari with these guys and be ready for a great time. As they say, we are not here for a long time, we’re here for a great time!
Looking back at a great year
cb3a8f6b-e471-4478-8e24-fa9422db8d4d.jpeg
IMG_7851.jpeg
20bdfb9b-dfe7-46e1-9d90-981da068d8fc.jpeg
915d3c84-4177-457f-a11d-0771a765f4c3.jpeg
52bf1f94-ccae-4160-bc7a-ae8d7969278b.jpeg
8d4d83fd-64e0-466c-90bc-868a7492cf61.jpeg
a31db0e9-e914-41e0-a1c2-785617ad41ac.jpeg
A small glimpse into a fantastic season
e81d375e-faf8-4cbe-bf9c-afe325b97bbb.jpeg
9a766ff2-0919-4a4a-b09c-ede9ce09b94e.jpeg
22ecca2a-8c07-4eab-becb-2ee49dca9fc3.jpeg
IMG_7820.jpeg
fa806fce-29ef-485b-9544-b103140a7ad1.jpeg
b4e3df48-40f2-4593-95bb-efbe5fdeed09.jpeg
A0A409A3-B41C-41DF-91B3-FEBFC48FF566.jpeg
f53b657c-2414-450f-bf44-292f3bd3e46c.jpeg
Don't forget to Check out our Mountain package. Chase that Vaali find the elusive Grey Ghost and spot a Mountain Reedbuck. in Gods Country. find refuge in the field and freedom under wide open skies.
 
Top