Rigby Big Game Lightweight 350 Rigby

The 350 Rigby would be a fine all around cartridge for African Plans Game, as it was intended.

My problem with many cartridges from Rigby is availability. I've seen 350 Brass, but haven't seen loaded ammunition for several years. Kynoch was usually a reliable source for most European cartridges, but much of what they produced is now collectors items. Sad to see this happening to such a great cartridge.
 
The 350 Rigby would be a fine all around cartridge for African Plans Game, as it was intended.

My problem with many cartridges from Rigby is availability. I've seen 350 Brass, but haven't seen loaded ammunition for several years. Kynoch was usually a reliable source for most European cartridges, but much of what they produced is now collectors items. Sad to see this happening to such a great cartridge.
Agreed.

According to the Australian Agent they have sold a few .350 Rigby's, hopefully they sell a a lot overseas and the cartridge has a mini renaissance.

In reality it shouldn't have died for mine, its a cool looking round, looks like it will feed slicker than goose snot with that bit of taper, the rifle I have on order holds 5 down.

I'm going to buy 4-500x cases and that should be a lifetime supply.

I think Rigby are going to have some ammo produced for the .350 Rigby as well.

Also how cool is the .350 Rigby :cool:
 
Going away back to the original post, as others have notedthe Big Game Lightweight is no longer a .350 alone. Very smart offering it in the two additional "lightweight" big game calibres, .300 and .375 H&H given the current fringe nature of the .350 (for now.) The .375 in this model would be the ultimate choice were i in the market for a Rigby at present. The lines lean even a bit more than typical to specific vintage models, and i appreciate the absence of a cheekpiece, which for a fella smack in the mean developed-world height range who hunts with iron sights is simply bulk/clutter. That's something rare in a production rifle today, having the option of no cheekpiece. I've ground my share of them off. Mind you, i get it. While it's not that difficult to remove one, i've seen some results of folks attempting to add them. Things you can't un-see.
 
Last edited:
Agreed.

According to the Australian Agent they have sold a few .350 Rigby's, hopefully they sell a a lot overseas and the cartridge has a mini renaissance.

In reality it shouldn't have died for mine, its a cool looking round, looks like it will feed slicker than goose snot with that bit of taper, the rifle I have on order holds 5 down.

I'm going to buy 4-500x cases and that should be a lifetime supply.

I think Rigby are going to have some ammo produced for the .350 Rigby as well.

Also how cool is the .350 Rigby :cool:
I hope we see a resurgence, that would push me over the edge to get one. but right now with no other parent cases that they can be made from I'm hesitant.
 
Bob, this is a great example of why you should take anything you read on wiki with a grain of salt.

I could create a wiki page stating that a 35 whelan holds 25 grains of powder and shoots 1000gr projectiles.
@JPbowhunter
Now that would need a really really quick twist barrel and that would let you know you have shot it. That would be one long bullet but it would have a great SD.
Might need to be long throated and single loading tho
Bob
 
I hope we see a resurgence, that would push me over the edge to get one. but right now with no other parent cases that they can be made from I'm hesitant.
Quailty Cartridge state side make cases, and Bertram here.

IF you are in a pinch the belt can be turned off .375 H&H cases I beleive....you could start with basic unstamped H&H cases.

If Hornady start making it for Rigby, well it will get its niche following. Sad part now CZ has stopped making safari rounds (race to the bottom for them now it seems) is that the .416 Rigby and others will again be niche...not everyone can spring for semi custom or customs. The CZ gave the option to everyone to enjoy these classics, such a shame.
 
pc3 Just sent you a PM about Simplex reloading dies. (y)
 
  • Like
Reactions: pc3
If anybody has some 350Rigby brass I would be interested in hearing how much water they hold.

Hey Greg,

I just checked one of my BB .350 Rigby cases.

88.8 grains of water.

Mark
 
Quailty Cartridge state side make cases, and Bertram here.

IF you are in a pinch the belt can be turned off .375 H&H cases I beleive....you could start with basic unstamped H&H cases.

If Hornady start making it for Rigby, well it will get its niche following. Sad part now CZ has stopped making safari rounds (race to the bottom for them now it seems) is that the .416 Rigby and others will again be niche...not everyone can spring for semi custom or customs. The CZ gave the option to everyone to enjoy these classics, such a shame.
is quality cartridge still in business?
 
is quality cartridge still in business?
not sure but when I search for the brass they pop up. Scored a set of .350 Rigby dies today at a shop in Australia, thought I'd better grab them while available. CH4D...I have other dies of theirs and they have been good.
 
Scored a set of .350 Rigby dies today at a shop in Australia, thought I'd better grab them while available. CH4D...I have other dies of theirs and they have been good.
Well done. Roger Mowbray at Northern Shooters Supplies?
 
Not to sidetrack things but rather to be sidetracked, would this in the article be the result of Selby's influence on his protege: https://www.americanrifleman.org/content/the-professional-hunter-s-rifle/
Interestingly, Joe Coogan turned to his long time friend and master rifle-smith, Lon Paul, to build his Selby-inspired “professional hunter’s dream rifle” off that vintage BRNO action (with pop-up peep sight), and certainly there was no one better qualified than Lon to do it.

In 1996 it was an old Coogan piece on Lon’s “BRNO ZKK 602 conversion” work that inspired me to send Lon my .375 BRNO for the same upgrades. (Link to my recent article on that rifle is below).

Had I another BRNO 602 rifle today, or at least the action, I’d want to build the same rifle as Coogan’s - except chambered in .404 Jeff, not 416 Rigby.

 
Interestingly, Joe Coogan turned to his long time friend and master rifle-smith, Lon Paul, to build his Selby-inspired “professional hunter’s dream rifle” off that vintage BRNO action (with pop-up peep sight), and certainly there was no one better qualified than Lon to do it.

In 1996 it was an old Coogan piece on Lon’s “BRNO ZKK 602 conversion” work that inspired me to send Lon my .375 BRNO for the same upgrades. (Link to my recent article on that rifle is below).

Had I another BRNO 602 rifle today, or at least the action, I’d want to build the same rifle as Coogan’s - except chambered in .404 Jeff, not 416 Rigby.

Very nice. I have a CZ .375 H&H customized as my backup rifle here in grizzly country in part after seeing photos of Selby's trim old Rigby in Sports Afield and reading his account of slimming it down. I really like the simple elegance of his gun and his accounts of how it handles. Mine had the older more slender BRNO stock with some drop at the heel to start with and handles beautifully as well; after hundreds of rounds and miles and alterations where indicated I honestly don't think it would be physically possible to find a slicker cycling Mauser.
custom cz .375 mine.jpeg
 
Very nice. I have a CZ .375 H&H customized as my backup rifle here in grizzly country in part after seeing photos of Selby's trim old Rigby in Sports Afield and reading his account of slimming it down. I really like the simple elegance of his gun and his accounts of how it handles. Mine had the older more slender BRNO stock with some drop at the heel to start with and handles beautifully as well; after hundreds of rounds and miles and alterations where indicated I honestly don't think it would be physically possible to find a slicker cycling Mauser. View attachment 792768
Very nice! You are properly armed for Grizz country!
 
Yes it was actually.....are they the CH4d Oz agent ?

They are the only mob here that I've seen stock CH4D and lots of other goodies. They also have a good selection of books.
 
  • Like
Reactions: pc3

Forum statistics

Threads
70,377
Messages
1,574,540
Members
170,056
Latest member
LuzBurgin3
 

 

 

Latest posts

Latest profile posts

K_P wrote on Buckleyguy12's profile.
Good morning from Montana.

I'm looking at a post from 2018 where you were looking for a lefty Winchester in .375 H&H Magnum. I'm selling mine. My email is [redacted] in the event that you're still searching for a unicorn.

Best,

Kelly Palmer
Gents, if you book and pay your deposit before the end of this year , you can have the bigger cull package for the 2026 price! https://www.africahunting.com/threa...griffiths-safaris-starting-at-us-2-560.96285/
I am currently in Northern Cape scouting a hunting area, we will have lots of amazing hunting opportunities for 2027! I will post updated available dates soon!
Azklmsr wrote on MANKAZANA SAFARIS's profile.
Good Evening. I am very interested in you hunt for the spiral slam. March in 2028 would be fine for me

Couple of quick questions:

1) Can we add some additional species on
2) what do you want for a deposit?
3) how do you want me to sign up

I'm on whats app or email

Kurt [redacted]

have a great evening
 
Top