Recent content by Wilkup

Thanks! It's actually a CZ Model 3 (Montana Rifles Inc barreled action).

Got a wild hair and decided to play around with some Trail Boss in my 300 WSM the other day and came away pretty impressed. I've never messed with reduced loads in anything but my 30-30 levergun before this, but I decided to try 20.0gr of Trail Boss behind a Hornady 125gr HP, seated to the...

Bump

Still for sale

Ha! Unless you have a pilot’s license. If you’d like more pics or want to FaceTime for details, I’m happy to do it. Let me know. W

Sounds good I’m in Cle Elum, WA, USA

Still for sale

Currently 300 WSM. I’ve loaded 130gr TTSX and 201gr Apex Afterburner and I can get 5 into an inch with each load.

I've got a CZ-USA Model 3 I picked late last year for a build and just don't have the time or funds for it right now. Gorgeous rifle and setup for timber. I planned to rebarrel to 35/300WSM but like I said, just don't have the funds. Comes with: • Fully bedded gorgeous factory walnut in pics •...

My reamer just showed up from PTG! Just waiting on the action to come back from LRI with the opened bolt face and adjusted feed rails!

I didn't realize this when I made my last post, but Gordon's Reloading provides the 225gr Sierra SPBT bullet data - Length (1.1575"), BC (0.364), and required seating depth based on my 2.40'' COAL! Looks like 2300-2400+ fps would be feasible with this little bullet. I still plan on favoring the...

Very close! The difference/advantage being I can use standard 358 Winchester dies rather than expensive one-off customs. I've shot wildcats over the past 15 years and custom dies have always been $250+. I picked up a standard RCBS 358 Win 2 die set for $48. I also wanted to use the Starline...

You seem to be a devout 35 guy. Any chance you’ve got some of those bullet lying around? If you could tell me the bullet length and also estimate the length from tip to Ogive it’d let me know if it’s a viable option for my shortened cartridge. Using Gordon’s Repoading software for 358 Win but...

Going off the Hammer load data, CFE-BLK is going to be the hot powder with this 140gr Stone Hammer and they're claiming 3175' from a 24'' barrel with the top load. I was notified my barrel will actually be finishing at 19.5'' and not the 18.5'' I intended due to the NECG sight I purchased. All...

Action was shipped off to LRI this week and I was quoted ~2 weeks for the turn around. My PTG reamer arrives 1 week from Monday and my smith is ready and waiting! 2-4 weeks for the barrel and front sight installation and then off to DNA for the DLC treatment of all metal parts. Another 3-4...