Recent content by hrabini

Its Alive! old Frankenstein is almost ready to shoot... the stock is 99.5 % straight... I set a 10-24 threaded rod 2 inches deep, you can see by the drill bit the angle, tap would only go in 1 inch so the last inch is threaded by the rod its self, nice n tight, Dear skin is soaking over night...

Already ahead of ya on the rawhide... i will soak over night when i am ready to use will lace it up with some para cord i have. just used the JB Weld, will let it cure for a couple days as its going to take that for the set screws to arrive. then a matter of drilling and tapping for the...

Thanks everyone! big help... I did order JB Weld wood epoxy. The wrist is straight, not pistol, and it was pretty much crack through at the bird head, well what i would call the bird head at an angle.. so its being glued together, missing wood replaced with epoxy including the bolt holes, I...

Now this is something I will look for in the near future! didnt think of that. and then i can engrave the stick myself. sure it wont be original... but it will nicer then the Frankenstein project currently underway lol

Thanks guys, I did call Numrich before posting... they say they are out of stock but i should check back with them periodically.

I have a shotgun with stock repair at wrist. there are a couple cracks that were were not attended to by original owner, I got the firearm at a very good price because of it. however at the cracks some pieces of the wood have fallen out. no way to save the stock for value but hopefully it can...

Howdy well title says it all... here is the story behind it! In an auction I picked up a beautiful CZ 550 Safari Classic chambered in 416 Rigby, the firearm is immaculate, like it came out of the box new! . I'm thinking who ever had it before... went on a hunt and somehow lost the entire...