Recent content by Gerard

  1. Gerard

    Banded bullets for especially larger calibre bullets in this case

    All 'banded' bullets are not true drive band bullets. They are grooved bullets. The difference is on this page: http://www.gsgroup.co.za/faqdrivebands.html
  2. Gerard

    Barnes vs GS Custom

    GSC designs to shed the petals after penetration, expansion and full wound channel forming. See the Expansion and Weight Retention item at FAQ on our website for a full explanation on what GSC found works best. We rolled many decades of personal hunting of game (more than a thousand), over...
  3. Gerard

    Barnes vs GS Custom

    GSC reduced the price lists for the Americas recently. This is because of increased demand and we figured that no amount of Black Friday discount beats a permanent reduction in price. Thank you to everyone who made this possible. GSC is in line with most other popular turned monometal bullets...
  4. Gerard

    Looking for solids for .257 caliber 100 gr.

    The GSC FN range works very well in the small animals and the .257" FN is 90gr in weight. I hope this information is not too late to be of use.
  5. Gerard

    GS Custom Bullets

    Getting all the lists up on the site took a little longer but the good news is that we managed to lower average prices by a fair amount. We managed to get to less than another manufacturer of turned bullets and less than that of two premium jacketed lead bullets. Of course quality stays where...
  6. Gerard

    People going to the USA from Port Elizabeth in South Africa

    There is a postal strike going in South Africa and, even if the strike is resolved now, the backlog of post will only be cleared by early January. So far, the end of the strike is not in sight. I am looking for someone flying back to the USA from the Eastern Cape in South Africa, to take a...
  7. Gerard

    GS Custom Bullets

    Hello Matt, Forgive the slow reply, sometimes time is not one's friend. There is no doubt that the price is on the way down. In this day and age it does not happen often but circumstances sometimes allow it to happen. This is the result of volume caused by increased use. We expect to...
  8. Gerard

    7mm Mag help

    lcq, Differences between rifles chambered for the same cartridge sometimes play havoc with published loads and speeds. I have seen where start loads gave maximum pressure/speed and, in a different rifle of the same cartridge, where charge loads above the highest published maximum load gave...
  9. Gerard

    GS Custom Bullets

    Victor, that is a very difficult question and the short answer is to load both and see where they go. The long answer is that both bullets shoot over very similar trajectories but that is when both are zeroed at 200m. It would therefore depend on the weight of the rifle, the residual pressure...
  10. Gerard

    GS Custom Bullets

    Hello Victor, As Marius has said, the 265gr HV bullet is indeed strong medicine. I would reserve the use of solid bullets (FN) for elephant and other applications where a solid bullet is indicated, such as on the small five. With an FN bullet, cape damage on the exit side is limited but the...
  11. Gerard

    GS Custom Bullets

    Hi Gordon, GSC sells in the USA as well. Any bullet we make is also available and made in the USA. The RSA gun laws, as elsewhere in the world, was concocted by people who crave control. They have no idea about firearms related matters and disregard the fact that the law abiding gun owner...
  12. Gerard

    GS Custom Bullets

    Thanks Tarbe, I am sure that we can add value to the shooting activities of guys in the USA. We started exporting from South Africa to the USA in 2000 but, given that the bulk of our production in SA was exported to the USA and the cost and paperwork was becoming a nightmare, it made a lot of...
  13. Gerard

    GS Custom Bullets

    Just a heads up on the websites for GSC: We are migrating the websites from Webafrica to a company in the USA and, given the complexity and depth of the South African site, this may take a week or so. GSC is now manufactured in the USA as well and any tech questions can be directed via either...
  14. Gerard

    EAW Scope Mounts

    When one builds rifles, the rifle is usually supplied ready to go. In other words, it is complete with optics and, usually, accessories. If something goes wrong or needs adjustment, the client brings the rifle back, complete with optics and accessories. This makes the builder acutely aware...
  15. Gerard

    EAW Scope Mounts

    I would mount the scope in Thor bases and rings if there is no need for a detachable mounting system. You can pay more but I don't think you can buy better. Rosenthal should have stock as well. I do not agree with your choice of telescope but that is a debatable point. :)
 
Top