Poly Choke?

SAFARIKIDD

AH elite
Joined
Jul 17, 2020
Messages
1,126
Reaction score
1,895
Location
Louisiana
Media
130
Articles
1
Hunted
TANZANIA..ZIM..BOTSWANA....NAMBIA
Is anybody out there doing installations of these? 12ga Vented Model
 
They went the way of the dinosaur‘s when choke tubes came out. I don’t think I’ve seen a new install in over 20 years. One outfit you might check with is the smith in KC who did all the factory custom work for Winchester on the model 12s. Can’t think of their name right now but a Google search should turn it up.
 
If your gun is threaded for a choke there is a selection of adjustable chokes about that just thread in, if you mean the older solder on type I'm not sure on new ones but most likely about or you may need to ask at almost any Gunsmith if he has a take off one.

I have a very short shotgun (barrel blow out) & I want to fit a Poly Choke (solder on model) as it is very expensive if you can find any body to thread the barrel here in NZ but I notice in the US it is common practice ?

TruGlo is one of the screw in type.

Truglo Choke.jpg
 
This one guy had a poly choke on a dove hunt. Every time he'd shoot we'd all yell "God Bless You!" because it sounded like a sneeze from a distance. Don't recall it helping him a great deal.
 
This one guy had a poly choke on a dove hunt. Every time he'd shoot we'd all yell "God Bless You!" because it sounded like a sneeze from a distance. Don't recall it helping him a great deal.
so it silenced it? how could that be duplicated
 
Looks like there was a Poly-Choke II out until recently as well.

poly-chokeII.jpg
 
Personally, if I had a gun that I needed to hang something that big off the end of the barrel, I’d install a Cutts not a poly choke. There are circumstances where this makes sense. I have an original M42 skeet gun with a factory installed Cutts. The balance of that little gun actually is enhanced with some additional weight forward.
 
I got a barrel with PolyChoke attached for TLMrs' Model 50 20ga, because she was frustrated by the full choke it came with. It is not beautiful, I should get it cut off and threaded for choke tubes.
 

Attachments

  • Screen Shot 2023-01-15 at 11.15.52 AM.png
    Screen Shot 2023-01-15 at 11.15.52 AM.png
    1.3 MB · Views: 54
  • Screen Shot 2023-01-15 at 11.15.54 AM.png
    Screen Shot 2023-01-15 at 11.15.54 AM.png
    2 MB · Views: 53
  • Screen Shot 2023-01-15 at 11.15.59 AM.png
    Screen Shot 2023-01-15 at 11.15.59 AM.png
    2.8 MB · Views: 51
  • Screen Shot 2023-01-15 at 11.16.02 AM.png
    Screen Shot 2023-01-15 at 11.16.02 AM.png
    1.1 MB · Views: 51

Forum statistics

Threads
54,586
Messages
1,158,389
Members
94,456
Latest member
Cycadman
 

 

 

Latest profile posts

Woods wrote on Hunter-Habib's profile.
Forgive me if this is the incorrect area, I signed up to this forum just now because I wanted to be on the list to purchase a copy of your autobiography. Please feel free to pass my information along to whomever is selling. Thank you so much. I look forward to it!
I like the Tillie in my picture. They are supposed to fit loose (2 fingers inside hat band), have mesh for cooling, and hold their shape after washing.
SSG Joe wrote on piratensafaris's profile.
From one newbie to another, Welcome aboard!
BLAAUWKRANTZ safaris wrote on Greylin's profile.
We have just completed a group hunt with guys from North Carolina, please feel free to contact the organizers of the group, Auburn at auburn@opextechnologies.com or Courtney at courtney@opextechnologies.com Please visit our website www.blaauwkrantz.com and email me at zanidixie@gmail.com
Zani
FDP wrote on gearguywb's profile.
Good morning. I'll take all of them actually. Whats the next step? Thanks, Derek
 
Top