Making homemade shooting sticks

Jasper99

AH senior member
Joined
Feb 12, 2015
Messages
78
Reaction score
40
Location
Georgia
Media
23
Hunting reports
Africa
2
I want to make some sticks to practice with before our trip. Would like to hear some tips on making them. 2 or 3 leg? Any tips for shooting from them or just personal preference and what works best in practice? Thanks!
 
How fancy do you want to get? If you just want some sticks to shoot off of then go down to Home Depot or Lowe's and get 3 sticks of 1/2" EMT (electrical conduit). Cut them down to 7' and tie them together with a rubber bungee at around 6'. If you have a old piece of leather you can use it for a rifle pad, if not a piece of foam rubber will work just for something to place the rife on. Now you have a tripod shooting stick.

You can adjust and cut the conduit until you have one that fits you and your shooting style for less than $20.
 
Jasper I bought a three leg set at Cabelas that really helped me practice with my 416. You need to ask your PH what he will have. My previous hunts the PH had two stick sets but in the lion camp the owner had three leg sticks. The twos are easy to get use to as you just push forward or pull back to adjust height.
 
I use 3 dowel rods about 6'5"in length tie them together at the one end with inner tubing and your set.. ;)

My best always
 
I tried to go with Jaco's idea but couldn't find dowel rods locally that were long enough. So I ended up buying a Primos tripod at Cabela's that was on sale. I am glad I did because I really like shooting off of them.
 

Forum statistics

Threads
64,516
Messages
1,420,713
Members
130,771
Latest member
RoslynLede
 

 

 

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top