Search results

I purchased an R8 shortly after they hit the market. I realized after removing the 1/2” R8 Professional recoil pad the 14” LOP was perfect for me. So I sent the stock to limbsaver, had them cut off 1”, reinstall the insert, and add a 1” grind to fit recoil pad for a total LOP of 14”. At the same...

Sold pending funds

PM sent

just noticed a typo (4x) should be (4”). As in 4 inches of eye relief across all magnifications.

No rings, just the scope.

This scope is longer from the turret to the eye piece than most scopes. That along with the fixed 4x across all magnifications means no ring extensions required which is common on Ruger No.1’s, or having to lean forward into the scope (rubber necking).

ttt

ttt

ttt

ttt

ttt, price drop on Zeiss Conquest $600.00

ttt, price drop on the Maven CS.1A $600.00

VX-3 sold pending funds.

Christmas sale, actually needing money for Christmas sale, Ha Ha. 1. Leupold VX-3 1.75-6x32 $325.00 includes original box 2. Maven 15-45 CS.1A $625.00 includes original box 3. Leica Geovid 10x42 HD-R $1500.00 no box All optics look in new condition. Prices...

Christmas sale, actually needing money for Christmas sale, Ha Ha. I have 2 of these, one is mounted and I am selling the other. This scope is great on a Ruger No.1. No rubber necking or extensions needed. The scope is long enough and has fixed 4" eye relief on all magnafications. Scope for sale...

Sold Pending Funds

I’m looking to trade or sell stuff I’m not using either. I also have a R8 308 barrel for sale on this forum and will probably post a few more items shortly.

Trade?? I have a Glock G20 Gen4 10mm limited grey edition, includes all accessories, case, paper work, lock, backstraps, and 5 magazines (3 that came with the gun and 2 extras). There is a rub mark on the top back rear corner of the slide. Pictures enclosed to show rub mark and condition of...

Is this for the Professional or Professional Ultimate. Thanks,

TTT

Price drop to $850.00 without the magazine insert, $950.00 with the magazine insert. Shipping is included either way.

I have a Blaser factory barrel I purchased used and in very good condition. I Have not used it and it's just sitting in the safe. Needing money for other projects. Standard contour and length, no sights, magazine insert included. I can only see some slight rub marks where the barrel tapers down...

Quick question, does this sit low enough that you can see your iron sights when looking thru the RMR. Thanks in advance.

Not the magnification you are looking for, but I have a Schmidt & Bender Zenith Flash dot FD9 in 1.1-4x24 if you are interested.

If you decide later that you would take a personal check or United States Post Office Money Order I would take the other 2.

I'm assuming that is the same QD new style mount, I need an old style mount

It has been been around 15 and 20 years ago, maybe longer, that I had to let 2 Bull elk within 50 yards get away because my scopes fogged over from the inside. I believe the first was a red field wide field, the second was the replacement by redfield with a different name since they had gone...

Got the stud, installed it, loctited it, and waited 24 hours. I attached the barrel, and even though you could feel some tension while tightening compared to almost nothing on a Blaser barrel, it was not enough to be a concern. My guess is there must have been some bad threads on the previous...

Got the stud, installed it, loctited it, and waited 24 hours. I attached the barrel, and even though you could feel some tension while tightening compared to almost nothing on a Blaser barrel, it was not enough to be a concern. My guess is there must have been some bad threads on the previous...

I removed the barrel screw/stud by holding the end with vise grips. I attached a facory Blaser barrel with no problems to the stock so it looks like stock captured nut is not stripped. Justin is sending me another barrel screw/stud to attach to the barrel. I will keep everyone informed on how...

I removed the barrel screw/stud by holding the end with vise grips. I attached a facory Blaser barrel with no problems to the stock so it looks like stock captured nut is not stripped. Justin is sending me another barrel screw/stud to attach to the barrel. I will keep everyone informed on how...

I was anxious to test this barrel so I took the morning off from work. Today I attached the barrel on my stock so I could test the barrel for accuracy. On 4 factory barrels and one Elmers barrel, tightening the captured nut on the stock that attaches the barrel usually takes 10 to 12 half turns...

I was anxious to test this barrel so I took the morning off from work. Today I attached the barrel on my stock so I could test the barrel for accuracy. On 4 factory barrels and one Elmers barrel, tightening the captured nut on the stock that attaches the barrel usually takes 10 to 12 half turns...

I received the check and barrel today, the barrel looks little used but in good condition. The fit and finish look good. I will try and test/shoot the barrel this weekend. If you do not here any more from me, that means all is good.

First thing is to see if I get the money and barrel in a timely manner, and then to inspect and test/shoot the barrel.

To all who have been following my ordeal with Justin. I just received an email from Justin, and he said a check is in the mail for the money I sent him plus the additional fee's. He also said that he is sending me a 30-06 barrel that is close to what I initially ordered, for the incovenience at...

I just received an email from Justin, and he said a check is in the mail for the money I sent him plus the additional fee's. He also said that he is sending me a 30-06 barrel that is close to what I initially ordered, for the incovenience at no charge. According to Justin, he sent the barrel...

If any one buys my barrel, mag insert, and ammo for the same $1350 price, then I would buy yours. By the way turns out I have 6 boxes of the terminal ascent (latest high bc version of the trophy bonded bear claw) ammo.

I just received the "Motion For Default" in my favor, now to see what is the next step in getting my money back.

For all those who have been following my ordeal with Justin Sip, I have now filed another small claims complaint, this time in the Utah court system, papers were served, and he has not responded in any way again. I have recently filed for a "Motion for Default Judgment" and am currently waiting...

If you do not find a 30-06, I have a R8 308, factory Blaser, 17mm, no sights, magazine included, 4 maybe 5 boxes Federal Terminal Ascent 175 grain ammunition included (have to check the safe next week, I’m out of town), that I would trade.

Muskox, I am one of those that got screwed by Justin Sip. I got so disgusted with my ordeal with Justin that I put this whole thing on the back burner since I had other important matters, a business to run, and deaths in the family that needed tending. Anyways, I just called the Washington...

I will take all the beartooth bullets, I can send a United States Post Office Money Order tomorrow.. PM me your info and total amount due. Thanks,

I did that, and had it crowned on a Blaser 300 win mag barrel. But there is the cost to cut and crown, cost to reattach the sight, and the front of the barrel no longer has the Blaser finish. This is definitely an option I will consider if I get no interest in a trade.

I have an R8 factory 9.3×62 magnum length 25 5/8" barrel (not the standard length 22 5/8") I special ordered from Blaser. It is a standard contour with sights, has 1 box of ammo thru it, and is in like new condition. I would trade for a R8 factory Blaser 20.5″ 9.3×62 barrel with a low round...

Here is some more information on where I currently stand on trying to get my money back or barrel from Justin Sip. The local magistrate court here in New Mexico awarded me a default judgement for the cost of the barrel $1000.00, court fees of $77.00, process serving fees of $100.00 for a total...

Just giving the latest update to all who are interested in my Small Claims Suit with Justin. I still have not heard from him. I filed a Civil Summons with my local magistrate court. I had to pay a process server in Utah to deliver the "Summons & Complaint" last friday. The paperwork was...

I am giving the latest update for any one interested and following my problem with Justin Sip. On March 22 I sent the following email to Justin. Justin, I have been trying to reach you since December. I am trying to find out what is going on with the barrel I put a $1000.00 down payment on...

I paid with Money Orders, so I may be SOL.

In my case, Justin had the barrel in stock, even sent me pictures, said he had it ready to ship (granted it was with the wrong load work up), so it is not like he has to make the darn thing. I don’t know what the problem is? My guess is that he sold the barrel to some one else. I just hope...