Wanted Remington 870 Barrel

Labman

AH enthusiast
Joined
Mar 5, 2009
Messages
330
Reaction score
419
Location
Pennsylvania, USA
Media
42
Member of
Lower Providence Rod & Gun Club, Audubon, PA
Hunted
RSA, Zimbabwe, Namibia, Botswana
Looking for a 12 gauge vent rib barrel 26 or 28 inches in length. Improved Cylinder or Modified choke. 26" I/C is my first choice. Must be a Wingmaster blued barrel. Not interested in any Express, Special Purpose or rusty barrels. Must be in decent shape inside and out.

Tom
 

Attachments

  • Screen Shot 2020-03-18 at 9.23.26 AM.png
    Screen Shot 2020-03-18 at 9.23.26 AM.png
    804.1 KB · Views: 110
  • Screen Shot 2020-03-18 at 9.23.27 AM.png
    Screen Shot 2020-03-18 at 9.23.27 AM.png
    968.5 KB · Views: 91
  • Screen Shot 2020-03-18 at 9.23.29 AM.png
    Screen Shot 2020-03-18 at 9.23.29 AM.png
    835.7 KB · Views: 111
Thanks for the tip. I'll check them out.
 

Attachments

  • Screen Shot 2020-03-18 at 9.24.09 AM.png
    Screen Shot 2020-03-18 at 9.24.09 AM.png
    1.3 MB · Views: 95
  • Screen Shot 2020-03-18 at 9.24.10 AM.png
    Screen Shot 2020-03-18 at 9.24.10 AM.png
    1.2 MB · Views: 107
  • Screen Shot 2020-03-18 at 9.24.12 AM.png
    Screen Shot 2020-03-18 at 9.24.12 AM.png
    936.5 KB · Views: 107
Last edited by a moderator:
Thanks for the suggestion but I've already checked gunbroker. Nothing there is what I want. Most of the barrels seem to be Express or some type of matte finish.
 
Here is another site that has barrels.

As for the blueing, you are most likely going to have to have it reblued no matter what you find. That is unless you find one new in a box.

http://www.corsonsbarrels.com/menu.html


.
 

Attachments

  • Screen Shot 2020-03-18 at 9.24.41 AM.png
    Screen Shot 2020-03-18 at 9.24.41 AM.png
    360.6 KB · Views: 104
Last edited by a moderator:
Good for you. From an individual or a commercial location? What length and choke did you wind up with? Mine has a 32" barrel with a full choke, I purchased it in 1968 0r 69.
 
28" modified wingmaster with a vent rib. Purchased from an individual over on another forum. I have an old wingmaster which I bought when I was a teenager back in the early 60's. My first shotgun. It had the old corncob forend and a plain barrel with a polychoke. I picked up a stock from a Rem. 1100, which fits the 870 as well, for $15 at an auction. That got me started on the project to refresh my old 870. Now I just need a forend.
 
Last edited by a moderator:
I took a look at a "newer" 870, what a "POS" by comparison. I also have a Hastings rifled barrel that shoots slugs very well. In close quarters i.e. swamps and dense woods those slugs are devastating on white tails.
 
I agree with you on the Rem. Express being a POS. That however is all you see in gun shops these days. Rem. still makes the Wingmaster but you never see them. Probably due to the price. When people ask me for advice on buying a pump shotgun I always tell them to look for a used Wingmaster instead of a new Express.
 
Labman, Dittos on that!! I have a couple of old Mossberg 500 20 Ga. pumps that I used for my Hunter Education classes. I think that they are better than the new Remington Express.
 

Forum statistics

Threads
64,678
Messages
1,424,358
Members
131,851
Latest member
VanessaFor
 

 

 

Latest posts

Latest profile posts

cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
 
Top