Sauer S404 Barrel Meopta MeoStar Scope

[Manny R]

Sauer S404 Barrel in a 404 HD Jeffrey Barrel 24 inches with Front and Rear sights... $1800.00
Sauer Magazine in a 404 Jeffrey 5 shot magazine ... $275.00
Sauer LH Bolt head for a 404 Jeffrey ...$300.00
Meopta MeoStar R2 1-6x24 RD 4C Illuminated rifle Scope in excellent condition...$1200.00

I realize not everyone is left handed. I will sell separately Rifle Scope and Bolt head.
I will not sell separately 404 Jeffrey Barrel and 404 Jeffrey 5 shot magazine.

 

[Beck]

This must have been a nice rifle set up at some point.

 

[Manny R]

It still is but I have changed directions from a 404 Jeffrey to a 416 Rigby.

 

[Longfeather1]

Can you tell me what fore end the barrel needs? I have the fore end for heavy contour barrels on my 404. If this barrel takes the same contour fore end I may be interested

 

[Manny R]

The barrel fits my Sauer S404

 

[Manny R]

I am not sure exactly what you are asking. If you have a Sauer S404 Rifle receiver it will fit.
If you are unsure you can call Eurooptic guns in Muncy ,Pa @ 570-368-3920 and speak to them to be sure . That is who I bought it from .
Thanks,
Manny

 

[Longfeather1]

Manny R,

Sauer 404 rifle barrels come in different contours (diameter) pending on the caliber. There's a standard contour which I think is 15 mm diameter, a heavy contour which is 19 mm diameter, there's a different contour for the "silence barrels", etc. Depending on the contour/diameter of the barrel being used the stock fore end channel width changes.

Example: If your rifle has a standard 300-win mag barrel on it, then it would have a standard contour barrel. If you then wanted to put a 375 H&H barrel on it, which only comes in a "heavy contour", your stock fore end wouldn't fit.

The barrels I have for my 404 are the heavy contour / 19 mm diameter, which the fore end on my rifle is sized accordingly.

What I'm asking you is what contour/diameter is your barrel? If it's the same as the barrels I have then the stock fore end I have will fit it. If your barrel is a larger contour/diameter then it won't fit.

The other question I have is since you have a lefthand bolt head will a righthand bolt, which is what I need, work with your barrel? That is something I will have to find out.

Regards,
Jack

 

[Manny R]

Jack,
I know for a fact if you have a right handed Sauer rifle the bolt head you need is a right handed. A left handed bolt head will not fit on a right handed bolt. As for the barrels as long as you have a S404 Sauer all S404 barrels will fit.
My S404 is a heavy taper barrel. The only thing I am able to see on the barrel is BL9F-Sa2121. My previous suggestion is for you to speak with EuroOptic Guns and ask them if your rifle will fit a Sauer S404 Rifle. Another suggestion is to call Blaser in San Antonio and speak with them. They are the importer/ distributor for Sauer, Blaser,Rigby etc and they will know all your answers. Their phone # 210-377-2527
All my S404 barrels fit my S404 rifle (6.5 creed moor, 300 win mag ,and the 404 Jeffrey).
Manny

 

[Manny R]

Jack,
I rather you confirm your findings. I want you to make sure all is correct and it fits properly & correctly. Blaser in San Antonio will be able to give you the answers to all your questions.

 

[Longfeather1]

Manny,

I've actually have email into Sauer in Germany asking questions about the bolt head, fore end channel etc. Figured I go straight to those who built it. I'll let you know.

Thanks.