Powder & Primer Deals Today

[JG458]

Saw Norma has some small pistol primers from Argentina. Does anyone have any experience with these? They seem like a decent price.

Small Pistol Primers – Made in Argentina - QTY 1000

Introducing our Small Pistol Primers, proudly made in Argentina to meet the highest standards of quality and performance. Designed to provide reliable ignition for your ammunition, these primers are a must-have for any shooting enthusiast or seasoned marksman.

normashooting.com

Also, does anyone have any experience doing business with Gunnerhouse.com? They have some larger rifle magnum primers for $44/1000 but seems too good to be true.

Thanks

 

[Woodcarver]

Saw Norma has some small pistol primers from Argentina. Does anyone have any experience with these? They seem like a decent price.

Small Pistol Primers – Made in Argentina - QTY 1000

Introducing our Small Pistol Primers, proudly made in Argentina to meet the highest standards of quality and performance. Designed to provide reliable ignition for your ammunition, these primers are a must-have for any shooting enthusiast or seasoned marksman.

normashooting.com

Also, does anyone have any experience doing business with Gunnerhouse.com? They have some larger rifle magnum primers for $44/1000 but seems too good to be true.

Thanks

I've not dealt with them, but when I run in to a new (to me) supplier, this is where I usually end up. Might want to read this. It may answer your question. "Too good to be true" is usually just that....

gunnershouse.com Review

Is gunnershouse.com legit or a scam? Read reviews, company details, technical analysis, and more to help you decide if this site is trustworthy or fraudulent.

www.scam-detector.com

 

[soumya sarkar]

Federal Premium Ammunition - 470 Nitro Express - 500 Grain Trophy Bonded Bear Claw - 20 Rounds - Factory Seconds

Wholesale Ammunition

miwallcorp.com

 

[Ridge Runner]

I’m in search of IMR 4064 if anyone seems some… I’m in N TX, but am routinely in W TN as well…

Have you checked Midsouth Shooters Supply in Clarksville, Tennessee for IMR 4064 powder?

They had a verity of powders the last time I was over that way. About 3-4 weeks ago.

 

[mdwest]

Have you checked Midsouth Shooters Supply in Clarksville, Tennessee for IMR 4064 powder?

They had a verity of powders the last time I was over that way. About 3-4 weeks ago.

Yep… check them every few weeks… just checked them this morning… still out of stock…

 

[375 Ruger Fan]

Midway USA has quite a bit of inventory showing up today.

 

[375 Ruger Fan]

8 lb Jug now available at Midway

 

[krish]

Gun broker have some 500 jeffery brass for sale.
Krish

 

[krish]

.

 

[rookhawk]

I just got this in my inbox a minute ago.

IMR POWDER 4350 1LB (1.4c) 10/CS is back in stock at Grafs.com​

You asked to be notified when this product was back in stock and we're glad to let you know that it is now available.

Time to practice your Quick Draw!​

We are getting limited supply of products in, so please be aware that more notifications may be sent than product we get in stock. If product is already gone, please sign up again. You could be the quickest on the next draw!

We won't send you further notifications about this product. If you would like to continue to be notified about this product, you can re-subscribe by clicking "Email me when it's back in stock"

Item #:	IMR43501
Price:	$39.99
Vendor:	IMR Smokeless Powder

 

[Inline6]

Brunos shooting supply has Varget and primers. Along with a few other powders.

AR-Comp, Reloder 15, Reloder 17, Reloder 7, Reloder 22, Reloder 25, Blue Dot, Power Pistol

(Sizes vary)



Varget (SALE!)



BLC-2, IMR 4350, H380, Accurate 1680





MINIMUM POWDER ORDER IS 3LBS! NO EXCEPTIONS

Copied email.

 

[Rare Breed]

I learned something very valuable today…a supplier Southern Munitions had my desired Federal 215 primers for sale yes they are expensive at $179 for 1,000 but I wanted them. I found out from them they were only 21 miles from me so I saved hazmat charges plus shipping to pick them up…never assume was my lesson learned today

 

[375 Ruger Fan]

Midway has 8 lb jugs of Varget

 

[soumya sarkar]

Federal large magnum primers are showing up even though very expensive when you add shipping and Hazmat

 

[Saddlemaker]

Federal large magnum primers are showing up even though very expensive when you add shipping and Hazmat

That's why I'm waiting . With the economy driving the prices up, If people stop buying , The prices will drop.

 

[Backyardsniper]

That's why I'm waiting . With the economy driving the prices up, If people stop buying , The prices will drop.

Amen brother. I been holding out for the same reason.

 

[Tbitty]

Probably a silly question, but is it interchangeable to use "regular" large rifle and magnum large rifle in non-magnum cartridges? Let's say a 25-06 or 308 as examples.

I know it changes your load development some that you can't freely interchange them for the same result.

 

[Mark A Ouellette]

Probably a silly question, but is it interchangeable to use "regular" large rifle and magnum large rifle in non-magnum cartridges? Let's say a 25-06 or 308 as examples.

I know it changes your load development some that you can't freely interchange them for the same result.

Physically LR primers and LRM primers should be the same height and diameter.

One may likely develop more pressure and possible more velocity if magnum primers are used instead of "regular" primers.

As a data point, I replaced Federal 215M LRM primers with Remington 9 1/2M LRM primers in a 458 Win with 470 Cutting Edge Raptor bullets. There was a 25 fps velocity increase using the 9 1/2M primers. There was probably a pressure increase using the Remington primers.

Any change to loading may raise or lower pressure. That's why all the loading manuals recommend starting with 10% less than maximum power charge and working (slowly) up loads toward maximum.

Be safe!

 

[Tbitty]

Physically LR primers and LRM primers should be the same height and diameter.

One may likely develop more pressure and possible more velocity if magnum primers are used instead of "regular" primers.

As a data point, I replaced Federal 215M LRM primers with Remington 9 1/2M LRM primers in a 458 Win with 470 Cutting Edge Raptor bullets. There was a 25 fps velocity increase using the 9 1/2M primers. There was probably a pressure increase using the Remington primers.

Any change to loading may raise or lower pressure. That's why all the loading manuals recommend starting with 10% less than maximum power charge and working (slowly) up loads toward maximum.

Be safe!

Thanks. That's what I thought was the answer but appreciate getting a confirmation

 

[shootist~]

Short answer is maybe. As Mark mentioned above you need to back off some and work up - Anytime you change any component. (Even going to a different brand of brass.)

FWIW, I substituted standard Federal 210s for magnum F215 primers in a 9.3x62 load - ang got slightly higher velocity and lower ES with the standard primers. Sample of one, so pretty meaningless of course.