Kimber Caprivi 375 H&H Sub-moa


AH member
Feb 17, 2022
Reaction score
Cameroon, South Africa, Tanzania, North America, Europe, Turkey, Mongolia, South Pacific
Sub-MOA with factory 300gr. Swift A Frames and Woodleigh Hydros, sighted in and Ready to go.

First taker for gun and scope gets it. If no takers on the combo, then I'll sell gun only.

Gun & Talley base Only: $4000
Gun, Eo-tech 1-8 Illuminated Reticle Scope, talley peep sight, talley lever detach rings, extra leaf, & brass: $5100
(this is a deal)
Shipping to your FFL in lower 48 included.
kimber sable.jpg


Kimber 375H&H hunted once for 2 weeks.
- Eotech VUDU 1-8 illuminated reticle scope in talley detachable bases and rings, sighted in 2" high at 100 yards for 300 gr A frames or woodleigh hydro. This scope has held zero through 100 to 150 rounds and 60 hours of airports. It is good to go.
- Talley peep sight
- Extra backsight from NECG in the white ready to file in to your load
- approx 100 rounds of federal brass, once shot.

I bought this gun as old stock, new in the original box and plastic from a gun collector 9 months ago. I took it to Mozambique on one hunt this summer and shot a sable, warthog, bushpig, baboon and reedbuck with it. It has had about 100 rounds through it.

I had my gunsmith free float the barrel when i got it, as it was a bit tight. Its a good one. It will shoot 2 swift a frames and a woodleigh hydro solid under an inch at 100 yards with factory federal ammo. See three ragged holes in picture below.!!! (the fourth hole high and left is a 40 caliber)

I have long arms so i modified the gun with a 1" spacer and a black recoil pad to match. The gun has some surface dings in the stock, and minor surface rust you'd expect from a gun that has hunted. I didnt try to buff them out for the pictures but you could remedy that with some steel wool and oil immediately. It is sub-moa, and with the rifle weight the recoil is very manageable.

Only reason for the sale is I want to build a custom gun with a longer stock to fit my long arms.

Serial No. KW16207- you can look it up for age but if i remember correctly was made around 10 years ago.


  • Approximate weight (pounds/ounces): 8/10 (this is the bare gun. With a 1" NECG Plastic spacer and talley bases it is 9lb 7oz, unloaded and unscoped. With Scope unloaded as configured it is 10 lbs 15oz. About 8oz less if you remove the spacer.
  • Overall length (inches): 44.50


  • Material: Steel
  • Finish: Matte black
  • Contour: Magnum
  • Length (inches): 24
  • Twist rate (right hand): 12
  • Grooves: 6
  • Match grade chamber
  • 3-leaf island express sight
  • Hooded adjustable front sight


  • Adjustable
  • Factory setting (pounds): 3.5-4


  • Material: AA-grade walnut
  • Finish: Hand-rubbed oil
  • Checkering: Wrap, 24 lines-per-inch
  • Length of pull (inches): 13.75 (As pictured it is modified to 14.5" with a 1" spacer and black 1" pachmayer decelerator)(you can return this to factory by adding a 114" black spacer and a 1 inch Red Decelerator
  • Drop at heel (inches): 0.49
  • Drop at comb (inches): 0.5
  • Ebony forend tip
  • Cheekpiece
  • Double cross bolts
  • Sling swivel studs
  • Front barrel band swivel stud
  • Steel grip cap
  • Pillar bedding
  • Glass bedding
  • Free floated barrel


  • Type: 8400 Magnum
  • Material: Steel
  • Finish: Matte black
  • Front locking repeater
  • Mauser claw extractor
  • Magazine capacity: 4
  • 3-position Model 70-type wing safety
  • target.jpg

  • Kimber 0.5.jpg
    kimber 1.jpg


  • 2.jpg
    39.4 KB · Views: 126
I have seen a few folks looking around for these rifles. this one shoots just like advertised I have seen the results myself.
Bump because my friend needs to sell this gun so we can go hunting.
Price drop

$3500 for gun only
$4600 for gun and scope

I’ll give it about two weeks then will list outside the forum. Hoping it can go to someone who will hunt with it.
It did not sell. Great gun, still open to sell. Send me a DM
Price drop

$3200 gun only
$4300 gun + Scope

Taking a loss on this one to fund my rifle build. My loss your gain, take it back to Africa.

Forum statistics

Latest member



Latest profile posts

Ready for the next hunt
I am game for a meat and eat. My attempt at humor.
rigby 416 wrote on rifletuner's profile.
Come from cz like that.
John A Flaws wrote on Horbs's profile.
500 schuler magazine.jpg
500 schuler bore.jpg
500 and 425 rifles.jpg
500 and 425 magaizne.jpg