Hornady .375H&H Superformance 250 gr GMX

Discussion in '.375 & Up' started by flat8, Oct 23, 2018.

  1. Luvthunt

    Luvthunt AH Veteran

    Joined:
    Aug 4, 2018
    Messages:
    249
    Video/Photo:
    2
    Likes Received:
    119
    Rnovi,
    Yes I am with you on the partition and aframes. Done all I could ask and never let me down when I did my part.
    By the way been using Nosler Partition for more then 50 years. 243 7mm rem 300 wby. 340 wby and 375.
    Aframes—375 416 and 458.
    Both manufactures finally make solids. Little slow on that product line.
     
    rnovi likes this.

  2. Morgan McPherson III

    Morgan McPherson III New Member

    Joined:
    Sep 28, 2018
    Messages:
    1
    Likes Received:
    3
    I've used Swift partition bullets for many years, with great satisfaction. However, after looking for something new, I decided to try the 260 grain Nosler Accubond 375 bullet. The rifle is a Winchester model 70 in 375 H&H and with a reasonable load of IMR 4350 the accuracy is consistently well under an inch at 100 yards so I decided to take them to Africa for a hunt for kudu and sable. I just returned and the performance of the Accubond was outstanding. Both the sable and a kudu were large, mature bulls and both fell to one shot kills at well over 100 yards. Neither went farther than 55 yards after being hit and the bullets were recovered with perfect expansion.
     
    Philip Glass, Ridgewalker and ufg8r93 like this.

  3. ufg8r93

    ufg8r93 BRONZE SUPPORTER AH Veteran

    Joined:
    Aug 9, 2012
    Messages:
    125
    Video/Photo:
    31
    Likes Received:
    229
    Location:
    Marietta, GA & London, England
    Member of:
    NRA Life Member, SCI, DSC
    Hunted:
    USA: GA, FL, SD, WI, WY, Limpopo SA, North West SA, UK
    You have any pics of the recovered GMXs? Sounds terrible.

    I've used the 180g Superformance GMXs in 300WM on plains game with good results.
     
    TTundra likes this.

  4. colorado

    colorado AH Fanatic

    Joined:
    May 8, 2011
    Messages:
    879
    Video/Photo:
    40
    Likes Received:
    655
    I solved the "flat shooting issue" with 300g A-Frames by having my Rem XCR II chambered to 375 Weatherby. Shoots 375 H&H factory just fine, can load 300g A-Frames to 2700 fps with mild pressures.
     
    Philip Glass and bruce moulds like this.

Share This Page

 
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice