CastShooter
AH member
- Joined
- Mar 16, 2023
- Messages
- 45
- Reaction score
- 78
I've got a very nice CZ 550 in 416 Rigby available, along with RCBS dies, some brass and Barnes TSX bullets as well as a 450 gr bullet mould made specifically for this rifle. I'm located in the Bedford, PA region if someone is local and looking. I'd like to get $3,000 shipped for everything 416 related. As pictured it does have a Leupold 1-4 on it I'd sell with or without the rifle. If I'm off the mark on price, show me that I'm wrong and I will work with you on the price.
I never planned on selling my 416 Rigby, but I also never planned on moving to Oklahoma either, I've paired down a good bit of my firearms collection and think it's time this rifle goes as well. I'd love to see it go to Africa, I bought it as a 20 something year old with aspirations, but I believe it's time to let this one go. Don't love anything that can't love you... right?
Make no mistake, this rifle isn't *perfect* I have hunted with it, it's been to Colorado twice and has popped many a whitetails. There are a few dents in the stock that could be steamed out, but no scratches or gouges. There is one factory finish defect that I have pictured, the clear coat never took on one spot, a local gunsmith looked at it, called it stable, gave it his blessing and I've shot it ever since. There is minor bluing fade/loss on the muzzle, everywhere else the bluing is nice. This rifle has had approximately 200 rounds shot through it, approximately half were cast bullets and lighter charges.
I know I'm new here, I am willing to go through any verification required to assure I'm not a scammer, including meeting a local member if necessary. I've got my PA license to carry firearms and could provide references if required.
Thank you!
Josh
I never planned on selling my 416 Rigby, but I also never planned on moving to Oklahoma either, I've paired down a good bit of my firearms collection and think it's time this rifle goes as well. I'd love to see it go to Africa, I bought it as a 20 something year old with aspirations, but I believe it's time to let this one go. Don't love anything that can't love you... right?
Make no mistake, this rifle isn't *perfect* I have hunted with it, it's been to Colorado twice and has popped many a whitetails. There are a few dents in the stock that could be steamed out, but no scratches or gouges. There is one factory finish defect that I have pictured, the clear coat never took on one spot, a local gunsmith looked at it, called it stable, gave it his blessing and I've shot it ever since. There is minor bluing fade/loss on the muzzle, everywhere else the bluing is nice. This rifle has had approximately 200 rounds shot through it, approximately half were cast bullets and lighter charges.
I know I'm new here, I am willing to go through any verification required to assure I'm not a scammer, including meeting a local member if necessary. I've got my PA license to carry firearms and could provide references if required.
Thank you!
Josh
