Custom Built 425 Westley Richards

Here's some pictures of the my older rifle with the extended magazine.

Westley Richards 425WR 012.JPG
Westley Richards 425WR 015.JPG
 
Last edited by a moderator:
As an aside I got my rifle from my late step father who swopped it for a .375 H&H, plain Jane rifle, from the original owner whom he was in the BSAP in the old Northern Rhodesia (now Zambia) so I am the third owner. It has the original owner's name engraved on the barrel next to the rear sight which matches the WR records.
 
The box is a magazine, but what are the side clips?? Don't know that one.
The side clips are two little spring loaded "fingers" that jutted out from the top sides of the action and were supposed to stop the uppermost cartridge from raising up too far and causing an issue with the bolt not clasping the cartridge correctly when sliding into battery. More of a gimmick IMHO.
 
Thank you Wheels.
I really have no idea how many have been made with the extended "box" magazine. They still offer it as an option on current production models. I used to have one (5 round) with a 28" barrel made in the '30's but the barrel was so shot out that I couldn't hit the inside of a barn if I was standing in it.
Some of the "game ranger" models had a smaller box and those held four rounds. Mine with the flush magazine holds three.

Thanks for the education!
 
See below for "side clips"
Thanks for the picture, very small cant quite tell what the purpose would be other than as a charger or guide? Thanks.

And then I saw your earlier post with description, thanks!!:A Bonk:
 
OP hasnt posted since January.
 
The side clips are two little spring loaded "fingers" that jutted out from the top sides of the action and were supposed to stop the uppermost cartridge from raising up too far and causing an issue with the bolt not clasping the cartridge correctly when sliding into battery. More of a gimmick IMHO.

No, no.
Not an gimmick.
These two clipps are very important.
Without them (the special design of the .425 cart.) you will see what jamming means.
The cheaper models dont have them and have mostley all feeding problems.
 
44254641nt.jpg


This is an great 425 WR (from the 1920thys...?).
For ca. 6.000 Euro (I have nothing to do with the seeling).
(Scroll a little bit down)
 
Last edited by a moderator:
This rifle has been for sale for years. The seller has a good reputation but no buyer can be found.

The ammunition supply could be a reason.
 
...I think it is the caliber.
("Very problematic" case design...).
And the costs for the handmade amo.

The rifle is great.
I handelt it, like a dream....

Of corse you should change the scope (it is too big)...
The last owner used it "for night hunting"...
 
I also think it's mainly the ammo.

I looked in my country to see in case I would buy such a rifle, I could also buy ammunition for it or at least produce it by reloading. It didn't look good.

The scope disfigures the presentation of the rifle, but a change for a more suitable scope would not be a problem.
 

Forum statistics

Threads
53,999
Messages
1,142,782
Members
93,379
Latest member
EllieBoatm
 

 

 

Latest profile posts

Cwoody wrote on Woodcarver's profile.
Shot me email if Beretta 28 ga DU is available
Thank you
Pancho wrote on Safari Dave's profile.
Enjoyed reading your post again. Believe this is the 3rd time. I am scheduled to hunt w/ Legadema in Sep. Really looking forward to it.
check out our Buff hunt deal!
Because of some clients having to move their dates I have 2 prime time slots open if anyone is interested to do a hunt
5-15 May
or 5-15 June is open!
shoot me a message for a good deal!
dogcat1 wrote on skydiver386's profile.
I would be interested in it if you pass. Please send me the info on the gun shop if you do not buy it. I have the needed ammo and brass.
Thanks,
Ross
 
Top