Allure of the Ruger No1

I was just on a hunt with @BC Tal, each of us had a Ruger no.1 as a DG Gun. Mine in 500 NE, and his in 416 Rigby. Two buffalo and a sable were taken with the No.1's. I have nothing but respect for the rifles and own 5 of them:
(7x57, 300 h&h, 9.3x74r, 450/400 NE, 500 NE)

Here is the 500NE with the first game we took on the trip. We had been following up Buff tracks when we chanced upon some sable with a nice bull in the pack. my plains game rifle and ammo was in the truck. So I used the 500, penetration was.... more than adequate...

1725216515114.png
 
Beautiful! What I really like is that you haven't messed with them.
I was just on a hunt with @BC Tal, each of us had a Ruger no.1 as a DG Gun. Mine in 500 NE, and his in 416 Rigby. Two buffalo and a sable were taken with the No.1's. I have nothing but respect for the rifles and own 5 of them:
(7x57, 300 h&h, 9.3x74r, 450/400 NE, 500 NE)

Here is the 500NE with the first game we took on the trip. We had been following up Buff tracks when we chanced upon some sable with a nice bull in the pack. my plains game rifle and ammo was in the truck. So I used the 500, penetration was.... more than adequate...

View attachment 630842
Beautiful sable, beautiful rifle. In fact very beautiful both.
 
I was just on a hunt with @BC Tal, each of us had a Ruger no.1 as a DG Gun. Mine in 500 NE, and his in 416 Rigby. Two buffalo and a sable were taken with the No.1's. I have nothing but respect for the rifles and own 5 of them:
(7x57, 300 h&h, 9.3x74r, 450/400 NE, 500 NE)

Here is the 500NE with the first game we took on the trip. We had been following up Buff tracks when we chanced upon some sable with a nice bull in the pack. my plains game rifle and ammo was in the truck. So I used the 500, penetration was.... more than adequate...

View attachment 630842

You’ve got a proper stock and barrel on that rifle! The No 1 has a well deserved reputation for excessive recoil in large calibers. You’ve addressed the two design flaws that cause this in the big hitters.
 
You’ve got a proper stock and barrel on that rifle! The No 1 has a well deserved reputation for excessive recoil in large calibers. You’ve addressed the two design flaws that cause this in the big hitters.
I was lucky on the barrel, as a friend of mine is the GM of IBI barrels, so he spun me a custom 26" 500NE barrel. I made the stock specifically to have a larger butt area for the recoil, and made the rear bolt recess large enough that I could slide a recoil reducer into it. The stock took about 3 days to make both the fore and rear. So recoil on it is pretty reasonable all things considering.

I also had the barrel threaded, so I can run a break when I am doing load dev on the bench.
 
I have to jump in on this one as I am waiting for my first No. 1 to arrive. Purchased a 416 Rem Mag from another member here. I fell in love with this rifle when I saw one at a gun store a few years ago. I did a lot of elk hunting in Western Washington and used a Ruger Scout Rifle. Being a lefty I am always restricted in choices so Ruger is a great choice. I love my scout rifle because of the compact feel of the gun with it's 18' barrel. The No.1 feels the same way. Short even though it has a 24 inch barrel. Exceptional swing and pointable. Great in the hands and the simplest action to use ever made. Can't wait for it to get here this week. Already have 80 rounds ready to bust my shoulder. It is range time!

Ruger model 1.jpg
 
Last edited by a moderator:
By the way, being new to AH it took me three days to read this string. You gotta break it up a little guys!
 

Attachments

I can’t help myself, I’m going to bore you guys and post another pic of my .275. I grabbed it and went down to the range yesterday. I shot one three shot group at 100 yards standing with sticks, using RJ Renner’s ghost ring sight (MorVue). Its is truly an outstanding sighting system! Have I mentioned that I’m loving this rifle?



Image1726586138.821895.jpg
 
Hey WAB-
Could you please post a closer shot of that RJ Renner ring? I’m really digging that…
 
  • Like
Reactions: WAB
I have a NECG sight on one of my No. 1s. It looks exactly like the sight shown below, right. The NECG sight connects to the rear receiver bridge.

The Renner "MorVue" sight replaces the Ruger fold down sight.

My question to @WAB is if you install the Renner MorVue, then you can't install a scope unless you remove the MorVue sight or use tall rings.




1726659147771.png


1726659207412.png
 
That is actually what Roger believed. However, I got out my calipers and determined that if he made the sight slightly lower it would clear a scope mounted in Warne medium QD rings.

Image1726660327.826019.jpg

Image1726660335.947205.jpg

Image1726660343.884625.jpg


I put a slightly lower front sight (NECG) on to ensure good clearance when the MorVue was adjusted to target at 100. I believe that I have the best sighting system you could possibly come up with for this rifle. I am anal about triggers (this rifle has a jard) and sights, particularly scope positioning. I believe that a rifle should come up like a shotgun, in perfect alignment. I will not use a rifle with which I have to hunt for the sight picture.
 
That is actually what Roger believed. However, I got out my calipers and determined that if he made the sight slightly lower it would clear a scope mounted in Warne medium QD rings.

View attachment 634948
View attachment 634949
View attachment 634950

I put a slightly lower front sight (NECG) on to ensure good clearance when the MorVue was adjusted to target at 100. I believe that I have the best sighting system you could possibly come up with for this rifle. I am anal about triggers (this rifle has a jard) and sights, particularly scope positioning. I believe that a rifle should come up like a shotgun, in perfect alignment. I will not use a rifle with which I have to hunt for the sight picture.

I am going to shoot you a message. I have Roger's MorVue sight sitting waiting for some time on my end to install. I am actually curious what NECG front sight you went with.

Roger was of the same mindset, sight wouldn't fit. It's nice to see it does. That with the quick release scope mounts is a heck of a setup.

Who did the Jard trigger on yours?
 
I am going to shoot you a message. I have Roger's MorVue sight sitting waiting for some time on my end to install. I am actually curious what NECG front sight you went with.

Roger was of the same mindset, sight wouldn't fit. It's nice to see it does. That with the quick release scope mounts is a heck of a setup.

Who did the Jard trigger on yours?

My buddy and I did it. We’ve done two. One was easy, this one was a total pain in the ass. We got it done but I don’t think I’d tackle it again.
 
My buddy and I did it. We’ve done two. One was easy, this one was a total pain in the ass. We got it done but I don’t think I’d tackle it again.

Yeah, I had a bit of a battle stripping the gun down and cleaning. They seem not that complicated...until you take them apart.

I almost lost the small spring that applies tension to the side of the receiver. It went flying when I was trying to reassemble.

Definitely an interesting gun to disassemble and reassemble.
 

Attachments

  • Screenshot 2024-10-01 at 7.42.50 AM.png
    Screenshot 2024-10-01 at 7.42.50 AM.png
    2.3 MB · Views: 17
I saw this mount for sale and thought someone here may appreciate having it:


There are also some 1” rings that I believe would work with it:

 

Attachments

  • Screenshot 2024-10-01 at 7.42.50 AM.png
    Screenshot 2024-10-01 at 7.42.50 AM.png
    2.3 MB · Views: 16
  • Screenshot 2024-10-01 at 7.43.41 AM.png
    Screenshot 2024-10-01 at 7.43.41 AM.png
    2.8 MB · Views: 19
They keep multiplying:
IMG_2612.jpg

My old stand-by, the .375 H&H, and his new little brother, the .45-70.
Now, to properly scope the lad- any suggestions from my fellow No 1 guys?
FYI- it'll be used primarily in the deer woods with 100 yard shots being the max.
Regards,
Goopy
 
They keep multiplying:
View attachment 637941
My old stand-by, the .375 H&H, and his new little brother, the .45-70.
Now, to properly scope the lad- any suggestions from my fellow No 1 guys?
FYI- it'll be used primarily in the deer woods with 100 yard shots being the max.
Regards,
Goopy

Don’t know your budget but the Z6 1-6x24 EE would be perfect on that rifle. As you know, scope positioning and eye relief are a challenge with No 1’s. This solves it.
 

Forum statistics

Threads
57,258
Messages
1,226,338
Members
100,520
Latest member
358Yukon
 

 

 

Latest posts

Latest profile posts

akriet wrote on Tom Leoni's profile.
Hello Tom: I saw your post about having 11 Iphisi's for sale. I have been thinking about one. I am also located in Virginia. Do you have photos of the availables to share? My email is [redacted]

Thanks and regards,

Andy
Natural Bridge, Virginia
TAG SAFARI wrote on mvalden's profile.
Wishing you a Happy Birthday!
 
Top