3 precision rifles for sale: 2 Alamo Precision Rifles and 1 Dakota

ftothfadd

AH enthusiast
Joined
Apr 22, 2025
Messages
274
Reaction score
265
Hunting reports
Africa
1
Hunted
Hungary, Austria, Tajikistan, North Ossetia, Canada, Alaska
This week I lucked into an excellent deal on a Gunwerks nexus rifle and now I must sell a couple rifles to make up for it. I would prefer to have a facetime/telephone call with the prospective buyer to avoid any misunderstandings.

1: Alamo Precision Rifles – 7 SAUM – absolute mint condition never hunted with.

-Proof light sendero 22” 1:8 barrel with 0.195 freebore, threaded 5/8-24

-APR BDL bottom metal

-Defiance tenacity long action, fluted and nitrided

-Defiance 20 MOA Rail

-Trigger Tech Special trigger

-AG composite APR hunter stock with two spartan adapters.

-Vortex razor LHT 4.5-22x50 scope in vortex rings included



It shoots 175 ELD-x at 2840 using RL-23 with single digit SD into 0.4” 3 shot group.

124 rounds down the barrel for load development. Never hunted with only used on the range so far to develop the above load.

Also included 50 ADG virgin brass, 45 rounds loaded with 175 grain ELD-X, 73 rounds loaded with hammer bullets done by Unknown Munitions. Ships in hard case



$4450 shipped TYD

1.jpg
2.jpg
3.jpg
4.JPG
5.jpg
6.jpg


2. Alamo Precision Rifles – 6.5 PRC - absolute mint condition never hunted with.

-Proof sendero 22” 1:8 barrel, threaded 5/8-24

-Hawkins Oberndorf bottom metal with Wyatt extended magazine insert (3.00”)

-Gunwerks GRB short action

-Gunwerks scope bases

-Trigger Tech trigger

-Christensen arms stock with a spartan adapter and flush cups.

-Scope and rings are not included.



It shoots 143 Norma Bondstrike at 2820 into 0.70” for 5 shots.

12 (!) rounds down the barrel. Never hunted with only used on the range so far to develop the above load.



$2990 shipped TYD
5.jpg

2.jpg
3.jpg
4.jpg
6.jpg

1.jpg


3. Dakota Arms built 30-378 Weatherby – lightly used condition


I have just bought this rifle used, but now it must go to make up for the gunwerks…

-27” carbon wrapped barrel with muzzle break

-Nesika model MH action with fluted bolt

-lightweight composite stock

This rifle is also in pristine condition, the only minor blemish I can find is on the side of the trigger guard (shown in figure). It comes with lapped 30 mm talley rings.


$2200 shipped TYD

6.jpg

4.jpg
5.jpg
7.jpg
8.jpg

2.jpg

Cross posted.
Thank you for looking.
 

Attachments

  • 1.jpg
    1.jpg
    290 KB · Views: 24
  • 3.jpg
    3.jpg
    294.6 KB · Views: 36
I have had Robert/Alamo build 5 rifles for me over the years and they have all been spectacular. I would put them up against anyone out there.
 
Weight of the Saum?
 
I cannot agree with you any more. Both of those APR shoot fantastic. I just have to freeze up some funds after my impulse purchase today...
 
What is the LOP, overall weight, magazine capacity of the 30-378 Wby? Do you have paperwork from Dakota? Do you have brass, dies or ammo? Any particular loads it shoots well?
 
What is the LOP, overall weight, magazine capacity of the 30-378 Wby? Do you have paperwork from Dakota? Do you have brass, dies or ammo? Any particular loads it shoots well?
Thank you for your interest. Admitedly, I have veery limited information on this rifle, as I have just recently bought it. I do not have any paperwork from Dakota with the rifle and I have not shot it so I cannot comment on that. I just measured the LOP from the trigger shoe to the center of the recoil pad is 13.75-14". As photographed it weighs 7.5# on my bathroom scale. Looking at it I think it will hold 2 rounds in the magazine plus one in the chamber. I hope this helps. If you are interested I am happy to FaceTime and show more of the rifle.
 
Robert is a great man and rare talent. I am proud to have 6 rifles build by him and his team in my collection.
 
Robert is a great man and rare talent. I am proud to have 6 rifles build by him and his team in my collection.
If I am not mistaken, he was deeply involved building the rifle that won the Kof2M a few years ago. I am not saying that either of my rifles up for sale here are 2 mile capable (;-) but they certainly shoot better than I can hold them...
 
I have just checked my stashes. I have a 100 virgin ADG brass to go with the 7 SAUM, not 50 as stated above...
 
Robert and the guys over at APR are wonderful to work with and make a phenomenal rifle. Took one of mine to SA on my first safari and am looking forward to many more in the future with that rifle. Good luck with sale!
 
The Dakota rifle is sold. The 2 APR rifles are still available.
 
Thank you for your interest. Admitedly, I have veery limited information on this rifle, as I have just recently bought it. I do not have any paperwork from Dakota with the rifle and I have not shot it so I cannot comment on that. I just measured the LOP from the trigger shoe to the center of the recoil pad is 13.75-14". As photographed it weighs 7.5# on my bathroom scale. Looking at it I think it will hold 2 rounds in the magazine plus one in the chamber. I hope this helps. If you are interested I am happy to FaceTime and show more of the rifle.
I appreciate your response. I figured the mag capacity is 2 plus 1 in the chamber. Do you have any ammunition to check? It's a nice looking rig.
 
Sir, the Dakota rifle has just sold. The magazine capacity on the APR rifles is a tight 3 or comfortably 2,
 
Please let me know if you have any questions/offers, though at this time I have to sell the rifles and cannot take trades.
Thank you for all the interest so far!
 
All PMs have been answered. Both APRs are still available.
 
If it is is preferred I am happy to separate the 7 SAUM and the scope . The rifle with the rings would be $3200 and I would sell the scope for 1150. They both are absolutely mint. The scope would \ come with original box and all the accessories.
Thank you for looking!
 
I have had Robert/Alamo build 5 rifles for me over the years and they have all been spectacular. I would put them up against anyone out there.
I couldn’t agree more.
 
Both rifles made by APR are still available. Please reach out with any questions or suggestions. Sadly I have sell both of these rifles even though I am sad to see them goo.
 

Forum statistics

Threads
68,305
Messages
1,518,447
Members
152,346
Latest member
ShannanZim
 

 

 

Latest posts

Latest profile posts

Paul K wrote on cgdemakis's profile.
My apologies for any grief that I may have caused you. I now have a pit in my stomach and I'm really pissed off and embarrassed. I feel that I have been made a fool of.

Please accept my apology.
Paul
CJNJ wrote on UNTAMED KNIVES's profile.
Still possible to order one of these?
ghay wrote on Floridanative's profile.
Hello,
I might be able to help you out depending on how many you need. I could probably spare 50-75 .285g A-Frames. They are factory pulls that look like new. Let me know if you are still looking,
Thanks,
Gary
blackdog001blackdog001 wrote on Snowball's profile.
Hi. I can take 5 boxes at $200 shipped if interested. Thanks
Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.
 
Top