1500 Howa 300 Win Mag hand load???

Izak11!!

New member
Joined
May 7, 2019
Messages
6
Reaction score
4
Location
Citrusdal RSA
Media
2
Hunted
RSA, NAMIBIA
Hi i bough a 1500 howa 300 win mag a year ago. Any advice on a good starting loads and bullets. Was told that noslers accubond 180gr not doing bad, and s365 any advice?
 
I've found the 180 grain Barnes TTSX (or TSX) to be very accurate and the Nosler Accubond just as much so. Powders I've used for years are IMR4831 and RL22, but I recently switched to RL16 and recommend it over those because it takes a smaller charge. You struggle with compressed loads with the .300 Win Mag and 180 grain bullets. There may not be anything wrong with them, but I try to stay away from them.

In my Vanguard with 24 inch barrel, 70.5 grains of RL16 produces 3070 fps which is the current factory velocity (.300 Win Mag loads have been reduced from the original 1958 velocities).

Also in my rifle, the 3070 fps factory duplication load is matched by

74.0 grains of IMR4831
74.3 grains of RL22
 
Last edited:
Hi, gaan kyk op reload sweetspot assistance op facebook. Baie info daar, soek deur die posts. As jy info het sal hulle vir jou n lading uitwerk, maar dan moet jy al die info gee wat hulle soek.
 
O
Hi, gaan kyk op reload sweetspot assistance op facebook. Baie info daar, soek deur die posts. As jy info het sal hulle vir jou n lading uitwerk, maar dan moet jy al die info gee wat hulle soek.
Ok gaan so maak het vandag als gaan koop so gou nwk bietjie toets, maar sal daar op facebook luister dankie
 
S385 at 70gr
Sierra game king 180gr
Overall lenght 83.4mm
Cci primer magnum
Norma case
100m

IMG_20190518_103518.jpg
IMG_20190518_103542.jpg
 
Last edited by a moderator:
Izak11!!, send a PM to "Alchemist" he lives in Pretoria and has developed 300 Win. Mag. loads using Somchem powders.
 

Forum statistics

Threads
53,938
Messages
1,140,983
Members
93,261
Latest member
SunnyOkn64
 

 

 

Latest profile posts

Because of some clients having to move their dates I have 2 prime time slots open if anyone is interested to do a hunt
5-15 May
or 5-15 June is open!
shoot me a message for a good deal!
dogcat1 wrote on skydiver386's profile.
I would be interested in it if you pass. Please send me the info on the gun shop if you do not buy it. I have the needed ammo and brass.
Thanks,
Ross
Francois R wrote on Lance Hopper's profile.
Hi Lance hope you well. The 10.75 x 68 did you purchase it in the end ? if so are you prepared to part with it ? rgs Francois
 
Top