Search results

Oh, and you can use any brass, Magnum belted, longer than 7 mm Remington mag. and 458 WinMag, the neck will be too short if you use these cartridges. I would stick with 300 Win. mag brass, you can use nickel plated brass it will not fetch., If you want to use your 416 REM. mag you will have to...

If I’m not mistaken, sir 416 Taylor case,and the man Dr Taylor ,chambered the wildcat used 300 win mag brass check it out. Good luck it’s a great cartridge. PS you don’t need 416 Rem. that was a 8 mm Rem case neck up, two 416 diameter

338 federal unless you handload and convert 308 brass necked up, you’re getting into a fairly hard to find factory load and you’re getting a heavy AR, 10 rifle, in my opinion and AR 15 platform is much lighter and more flexible, just buy a three or $400 upper Complete And you can shoot 50...

As a Alaskan traveler pH, I would recommend an AR upper in 50 Beowulf uses standard 20 and 30 round AR mag.s you can put it on any AR platform, that way you can shoot 556/76.2 x 39/anything you can think of on an AR 15 style platform 6.5 Grendel good luck be safe have fun God bless cheers, Tony

Steve, it’s free and they have a list of all FFL dealers throughout United States

Log into GunBroker Steve become a member and look at all the FFL dealers throughout California that may solve your problem. Good luck, Tony.

Crazy awesome you rock that is cool never thought of that belt fed 35 Ott six nice cheers Tony

I’ve been loading old stock, Barnes originals W748 w 56 grs , heavy jacketed, 300 grain SP projectiles @ 2300fps Apx. I noticed over penetration on my backstop which included 4 x 4‘s and sandbags went through all of that and threw three soft pine trees, approximately 12 inches thick. Has anyone...

I also used 250 grain hard-core. They’re great to start up a load and use on paper to get Coefficient of your partitions are use spear grand slam 250gr to hunt with and 250 hot cores to paper as you were doing and white tail. That’s obviously more than you need 35 Whelen even going at 2100...

Very interesting are use the 300 grain Barnes soft point they don’t make it anymore, what powders did you use? I’ve been using Winchester, 748 and a. H CFE223 Bob Nelson recommended it from this site. Cheers, Tony.

Go with the most recent, newest, reloading manual, you can find because it has better new or more advanced powders, 2021 & up Richard Lee’s 51st addition is good, and Speer loads then Barnes or Nosler, they treat the 35 Whelen like an old musket with pressures under 50k and modern bolt actions...

I’ve made brass out of 270 win and 280 Remington. I have also processed nickel 30-06 and 270 Win. with no signs of nickel fletching it’s nice when you’re hunting, no tarnishing or stains, I was reluctant “,I heard a blog saying you could not do that but that’s not true. It’s nice to have nickel...

Hi Bob, hope your hunting trip went well in land I did buy CFE223. It’s amazing very clean burning. Thanks for the recommendation Bob, it meters really well. cheers, Tony. help another 35W enthusiast

Look in GunBroker under new old stock and used, in reloading supplies or ammunition I found 60/80 hand loads Remington 35 Whelen head stamped,I pulled bullets & dumped powder & primers and used brass , great & cheap like $50 bucks

Open a GunBroker account. If you have not already, there is brass for sale Remington 35 Whelen ,you might find federal or Norma, or take your once fired brass with the 35 Whelen head stamp reload it to what you want. Good luck Happy safari cheers Tony.

I have also use 270 Winchester, 280 REM. use a decent amount of resizing lube it works.

I know you’ve probably thought of this. I have a 35 WhelenI just get once fired brass or new brass 30 -06 run it, run it through your sizing die make sure you use resizing lube,& you have 35Whelen/35-06. that’s what people did before Remington in 1988 started making brass and a factory load...

I tried hunting in New Zealand outside of Auckland pretty please you have to be a Tara or chamois thanks for your persistence. I’ve got some old reloading books from the 1950s 60s and 70s coming first edition Nosler gold hard bound pretty cool

Thanks for all the help so far on the 35 Whelen I suspect he’s on a walkabout, and I am in Florida, my day is his night and vice versa. Happy hunts

Very nice specimen

I’m hoping to pick his brain just a thought I don’t think it’s crazy but 9.3x62 loading data for a 300 grain projectile, may work at starting loads. The case capacity is almost identical, and the cal .35 vs 36 is to. thank you. Cheers I appreciate all the input.Tony

Thanks for sending me in the right direction. I’m still trying to navigate this site I’m really green here, but I’ve been reloading for over 40 years just picked up loading 35 Whelen Cheers.

2023 new Lee 51th reloading book states you can get 2900+ fps with a 200 gr. Hornady/Speer with quite a bit of projectile weights. from 180 to 280 gr bullets, and a lot of powder choices, maybe that will help you cheers Tony PS I use it with my custom Mauser chambered and 35 Whelen I find, 250...

Woodleigh reloading manual, what outlet/would carry that book, I am interested in purchasing one, do you know if the website sells manuals, thank you. I need loading data on 310 grain projectiles out of a 35 Whelen. custom Mauser.