Search results

I had one build on a ZG47. Special reamer ordered Dies set from CH4D I managed to collect a fair amount of Bertram brass and it’s easy to make your own from 30-06 Bullets from woodleigh and some bullets made in SA. It’s Fine rifle perfect for Bushveld hunting.

82gr of H4350 get me to 2350fps with a 400gr Swift A Frame I load 79,5gr of H4350 for the 430gr North Fork to get around 2250fps

Deburring tool from RCBS

I had exactly the same problem with my .318 Bertram Brass. The flashole sizes are different from case to case, a frustration but beggars can't be choosers. But a quality problem at Bertram. I end up using my pin from my RCBS 9,3x62 dies. Worked on most, but not all cases. Had to trim a pin down...

Not an expert at all. But don't think anyone has asked where you plan for the hunt to take place. If it is the swamps of Mazombué or an Eastern Cape Buffalo hunt then I would definitely prefer a scope. Even in a think bush environment I personally think one will give up more shots using open...

I have hunted two Buffalo with my 9,3x62. The Hydro is an amazing bullet. Really liked them. I had some in my ammo belt if needed. My rifle was loaded with Swift A Frames, I never needed the Hydro. If the situation is there to use the Hydro then you can use them, but they penetrate deep, I...

I like using Norma 203B in my 9,3x62. My loads are around 2300 fps with a 286gr A Frame. I personally don't see the need for more fps that one can get from R17.

Good looking Rifle. At 7lb is a "light" rifle for a big bore in a No 1. a Normal Tropical like the 416 Rigby weigh around 9lb. The 450/400 is 7,75lb and pretty much the perfect calibre combination for the Ruger no 1

Wow, a good-looking rifle and great setup. I had the same results with 82.0gr H4340 My Swift A frames and Woodleigh Hydro shooting at the same point of impact. The Hydro's cutting one another. Getting the same results with my 9,3 x 62 using the same combo. Enjoy the rifle and take it hunting

.22 Hornet with 50gr Rhino Solid Shank bullets

Doug the 300 H&H in a No 1 is a perfect setup I have also struggled with mine to get a smaller grouping but made peace with it. Its a hunting rifle Mine liked 200gr Accubonds, as a hunting round I prefer the Woodleigh 200gr PP. Have recently bought 200gr A-Frames and will be happy with a 1.5"...

RDog Nice looking rifle and a fine caliber. Do you know what make the reamer was that used and just from the photo it looks like the COL is a little bit shorter the the Original. Did you seat the woodleigh bullets deeper past the crimping groove.

Good Morning Is there maybe an update on the above. Do you perhaps know if its been Gazetted. Regards,

Be careful buying Ruger No 1 Rifles. Is an Addiction !!! They are fine rifles to shoot, hunt and collect. A 416 or 458 defiantly get your attention

Both would be fine. It is all about shot placement. I would go with the A-Frame

Great setup, and with a little bit of work you will have a perfect rifle to take to Africa. I would go with the Talley Mounts. I have them on a ZG 47 and a 550 and they work perfect. For me they are more refined and better finished off. Also less bulky then Warnes that I have on my 602.

Cant give an opinion on hunting in South Taxas. But I would also look at the Warrior, it is a lighter build boot then the Safari and Selous. Make no mistake Courteney Boots are heavy, not to talk about a wet size 12,5 . Personal I think the Selous/Safari is to much boot for the general hunting...

Karl and his team run a world class operation . We hunted these 2 fine bulls with PH Divan Labuschagne the end of November. This was my second buffalo hunt with Ndumo and defiantly not my last. A hunt with Karl should be one everyone's list.

This thread became very informative. I had the same problem with my primer flash holes on the Bertram brass. Sort of a disappointment after paying such a premium and the process of getting them in and to South Africa. I'm now set on my load with H4350 it works like a charm. Still would like...

Hi Rdog I been through the same process and for me it was worth the trouble and the wait. Bertram Brass and Woodleigh bullets is not to much trouble to source. You can also use 30-06 brass if needed. I have used a ZG47 action and a Lothar Walter Barrel . I placed a special order for the reamer...

It all depends on personal taste. But If your blank have lots of detail in the forearm, I would go without the tip.

I don't think the discussion should be about the killing capabilities of the 45-70. The original post is not clear as where he will be hunting in RSA. As your primary/only rifle on safari ,you will limed yourself with a 45-70. Take a second more suitable rifle with. Let one of the trackers...

As mention, the higher velocity adds to the recoil but it helps with the rainbow trajectory of the 45-70.

I think everybody has a different tolerance for recoil. Still get me when everyone mention the heavy recoil of the 7mm Rem Mag and 300 H&H especially in the Ruger No 1 rifles. For me they are mild and don't kick much more then a 30-06. The normal box ammo in the 45-70 is mild, very mild compare...

If you are not set on the 300gr, I would just stick to the 286gr Swift A frame. They will get the job done just as good if not better. I load them in my 9,3 with Norma 203-B and get to 2450fps with no problem.

Thanks everyone I started loading with R19. Groupings at 100m is not bad but not great. Have loaded some H4350 that I had. Will go to the range in a day or two.

Morning Is there maybe anyone that have some experience reloading for the 318WR that might be able to share some loads and feedback. Thanks,

Ruger No 1

What I forgot to mention I have a 9,3 x 62 and using the above 285/6 Oryx/A-Frames. I also have a 74R and did not want to duplicate the 62mm load. Was thinking of a 250gr, but most my hunting is at short range. 50-150m. The reason for the Q about the 320gr

I'm happy with the 285/6gr Oryx/A-frames. I would like to try the 325gr combo in my 9,3x74R Ruger No 1. Any one done some testing and have data to share. The Rugers are known for the strength so would be nice to get the most out of them Thanks

Steve Fourie - South Africa

I have build a 9,3x62 on a CZ550 a couple years ago. It worked for me and been my primary hunting rifle for the last 6 years. A couple of small changes made a big difference. Good Luck with your dilemma

I get 2430 fps with Norma 203B using A frames, Hydro's and Oryx. Dont see the need for more speed.

Will do so when I get time, Its build on a ZG47 action, Lothar Walter Barrel, Barrel profile of an original WR and finished with a not to bad looking piece of Turkish Walnut.

Good day I'm Based is South Africa and just finished with my 318 WR project. I have a JGS reamer, with Go Headspace and a No Go Gauge for sale. Only used once If there is anybody interested please send me a PM, we can talk about the price and shipment Regards,

COL with the Green Cap 87.50mm without the cap 84.20mm. Feed perfect from my CZ550

Good Day I have loaded the 286 gr Hydro in my 9,3x62 CZ at 2400fps, using Norma 203B. I will post the COL little later when I'm back home.