Search results

Choke restriction of no interest . But barrel must be plain no rifling or rib and must be 3”.

Rifle was purchased from AHR and has : Shortened 24” barrel New barrel band front sight with hood Glass bedded AHR 3 position safety AHR trigger set at 3# Bolt handle straightened and knob filled Barrel band sling swivel mount Holds 5 down in mag with extractor mod’d to accept loose top round...

Both in good condition. Complete. $150 for both plus shipping lower 48. USPS mo or personal check ok. Will hold books until check clears.

Any updates on the present status of Mattrix Firearms services?

40” sable skull and horns for sale, no cape .$250 plus shipping

1.375cal 235 gr. Speer hot core 49 count $30 shipped 2.416 400 gr Nosler partition still in plastic wrapper 50 ct. $100 shipped 3. 458 500 gr Swift A-frame still in plastic wrapper 50 count $100 shipped

5 antelope horns and skulls for sale. $50 ea plus shipping. No capes. Photos to email address I am not an official measurer and info is best effort with steel tape. Reedbuck 12 7/8 and 13”…….. Zimbabwe Bushbuck 15 3/4 around the curve…….Zimbabwe Springbok. 16”…….Namibia Duiker. 4”…….Namibia...

If you read this pls contact me by PM Thank you

This rifle was originally put together by Jack Lott for an editor of the Petersen Publishing Co. I have a signed letter from that editor certifying. When I received the rifle I sent it to Wayne at AHR for his #2 modification and asked that he also do a pop up peep and an AHR removable break...

Anyone give us an update on present status of Woodleigh?

Trying to find 300 gr TB Sledgehammers for the 375. Any help would be appreciated.

I now see Mattrix is referring CZ upgrades to an another outfit. Anybody have more info?

Anyone with an update on Mattrix?

In the past it appeared that AHR was mentioned/ recommended on a regular basis. As I had Wayne do two rifles and purchased a 3rd from him I understand why AHR received the level of support. However Mattrix does not seem to be getting any where near the same level of reference. Anyone care to...

Why such a long time shortage of most Alliant powders?

Barrel on my CZ 550 375 is 24”. Rifle is heavy (9.6 lb) without scope and was thinking about taking wood off and out ot the stock along with cutting barrel to 22” . Question is : opinion on cutting back to 22” to give me better balance between the hands and feel of lighter weight. Any thoughts...

Wanting to buy a used copy of above book. Pls PM me with what you have and price. Thanks

Saw a reference to a feedback section. Need to know where I can find it. Thank you

Asking for pros and cons on 22” vs 24” barrel on a 375 HH

20 new nickle RP cases….31 new RP brass cases….40 once or twice fired Hornady brass cases $125 shipped to lower 48

Does anyone belong and have your orders been handled ok? Is there a membership fee? Thank you

With the loss of AHR to CZ owners and the CZ Pro shop shutting down along with the change of McMillan ownership the DG rifle work is harder to find folks to do the job. Time, hopefully will correct this but trust must be established with the new folks. Have read on this website comments as to...

Hi Have a 416 with one of the Safari American stocks. Stock is bulky, can anyone offer a suggestion who in the USA will rework a CZ stocks.

Anyone know what happened to the CZ 416s on Gunbroker ? They are all gone at the same time. Yeh, they were bought but who buys 14/16 at one time.

Anyone using Ramshot Tac in the 458 Lott. What has been your expierence and what loads have you been using with a 500 gr expanding bullet such as Swift A frame or Nosler Part. Have you been able to reach 2200 fpm. If so what length barrel and primer. Thank you for any help.

Am looking to replace my old Beta Chrony and am considering the Labradar. Most of what I researched is positive with the exception of aligning the unit with the sighting attached equipment as supplied. Anyone using this Chrony and what has been your experience? Thank you

Looking for advice. Have made 3 phone calls and sent numerous emails to them asking for ball park quote on work I want done on a 550. No response, is there a certain protocol that I am unaware that is followed? Thanks for any help.

Just hung up the phone with a Federal rep , who informed me that no Talk about arrogance in conveying that info. Obviously Federal no longer cares about customer satisfaction, iF you want an eye opener call 800 379 1732 and listen to the mega corporation list that is programmed to answer your...

Have been using the Sledgehammers since the early 199os, but recently have been unable to buy any. Was going to try North Forks but with their shutting down need to look else where. I prefer a non mono metal bullet as they take up less space in the case. It appears that Hornady and...

want to rework a cz550 stock to fit a Brno 602 and trim the outside dimensions. Is there anyone out there who can/will do?

Looking for a Leupold vari x 2 in 1x4 . Was listed as a scope for shotguns. Would like the model with a hvy duplex but would buy either if scope is in good shape. Thanks

60 NEW UNPRIMED HORNADY 416 RIGBY BRASS 25 COUNT 416 NOSLER 400GR DG SOLID FLAT POINT 50 COUNT 416 HORNADY 400 GR DGS 50 COUNT 416 BARNES 40 GR BND SLD RN LIST PRICE ON ALL ABOVE IS $327—-SELLING FOR $225 SHIPPED

who are the gunsmithing people out there who specialize in CZs other then AHR?

Have used Federal mag rifle primers for quite a while, ran out and subbed CCI 250 mag primers until I could find Federal. Did not see any difference in group size off the bench or over the Chrony. Cartridges were 458 Lott, 416 Rigby, 416 Rem mag and 375 HH . What has been your expierence? Thanks

any suggestions where I might find 458 and 416s would be appreciated. I have had no luck at Midway, Grafs and others.

as some country’s require the ammo box read the same as the ammo in them,ie 375 ammo must be in a factory ammo box printed with 375 info, and many of us who reload buy new cases that do not come in a ammo box that can be used for loaded ammo, what have you come up with to meet regs?

want to build a 458 Lott and have a choice of a CZ550 or Brno 602 action. Not sure which would be best. Want to build a Lott as I have one that my Grandson now uses so have all the reloading etc for the Lott . Which action would be the best and why.

Anyone have expierence with a McMillian synthetic stock on a 458 Lott. Did it hold up, how many rounds have you fired. Question is more dependent on damage caused by firing then other usage.

Anyone have one of these in a heavy caliber [375 or above.] ? Looking for info on quality and long term usage and accuracy. Also any one used their custom shop and Were you satisfied. I am looking at a 458 Lott in the V2 model. Really would appreciate any help and advice you have. ThankYou

here am asking opinions on the rifles as to reliability and dependability not on the 458 lott cartridge. Taking into consideration as is factory rifles. No upgrades.

Opinions please on the Whitworth action as to quality, reliability for a DG rifle.

Pros and cons of different barrel lengths for the 375 h&h —what do you prefer and why?

Picked up a Talkeetna in 375 H&H. Would like to make some mods. It is muzzle hvy so am considering 2 options. First is to have a recoil reducer installed in the stock for the added weight. Who can/will do that as it has a synthetic stock and the Decelarator pad is glued on? SEcond: cut the 24”...

would like to find or have built an 8.5 # 375 HH . Tried a couple of gunsmiths but if I choose a CZ for instance the rifle with scope et al will weigh more and likely will be around 11#. I want a rifle that will weigh no more then 8.5 with a 1x4 scope and mount. Can it be done? How can it be...

Am seeking where Reebok, bushbok, steinbok, blue duiker and springbok horns with skull plates could be offered for sale. Also sable horns, skull plate and cape. Thanks for the help

Want to pick up a 458 Lott for my grandson. He has lots of expierence shooting and hunting with the caliber,so no concern there. Looking at one of the two manufacturers . Recognize the difference in cost but willing to have AHR work on the CZ. Need and want advice on quality and reliability of...

Cannot find thread to contact and order. Please provide path. Thank you

anyone reloading the 458 win and 500 gr bullets able to chrony 2200fpm with the powders available today?

Want to replace the orginal with a machined follower and stronger follower spring. The factory ones have started to allow the cartridges to nose down on bullet end when loading. Necessitating readjusting by pushing on bases which takes time and eyes off target.

GREAT to join with other hunters who enjoy info on hunting.