Search results

It would look great in your safe Daniel!

Alright, you got a good laugh with your decimal play but there is no need for lashing out or making smart remarks at/toward me for not listing a price. I stated in my original post that I was taking offers (not knowing that is against policy) then someone brought it to my attention but I...

If I could delete the listing I would. I was unaware that I had to have a price listed and when I found out of it, it was to late to edit the listing so I figured they were going to take the listing down since it did not conform to the rules. But if you add three zeros after that 6 its yours

Still in factory packaging is 38 rounds of 400 grain monolithic solids and 19 rounds of 400 grain dead tough soft points and CH4D dies $700 shipped and insured

I am not 100% sure if its the same one, but he is a close friend of mine and did help me acquire this rifle, so it would make sense that it would be the same rifle. In which case my apologies for calling it something it may or may not be. I do believe it to be a deluxe for sure, but I thought...

It is an A-Square Hannibal Deluxe model. Very few of these were made and I'm assuming they were for people who either had extra "upgrade" money laying around or thought the coil-check stocks were a bit unsightly. At this time I am taking offers on the rifle.

Taking serious offers on this magnificent specimen

As of right now, yes.

I wish I had a hunt planned! Life has me to busy working right now to even think of a hunt.

I have a Mid to fairly high end cigar collection id like to get rid of. I don't smoke near enough to keep up with what I have collected over the past years. Everything up for grabs has been well taken care of and most sticks have been with me for about 2 years (went cigar crazy 2 years ago...

I have to many big game rifles sitting around not getting used and downsizing finally sounds like a good idea. Gotta make some room for my behemoth 600 O.K. that's about a week or two from being finished. For sale in addition to the 375H&H here and the 416 Remington magnum there is a CZ 458...

Make me an offer I can't refuse

It would look very nice in your hands your safe!

Yeah, Sorry, I was referring to the 416 Remington magnum. The 375 H&H is still $2,000.

I also have this CZ 550 Safari Magnum 458 Lott for sale if anyone is interested. $2,000 plus shipping Thank you

I have the 500 grain solids and the 500 grain partitions available $210 a box plus shipping

It is still available and id let it go for $2,300

Sorry Miko, I have been sick so I haven't been on here. Will message you now.

Beautiful rifle still available as well as a 416 Remington Magnum that is basically identical.

No it has not sold

Ouch!

Someone said they were going to send money a few days ago. I am waiting to see if they actually sent it or not. If I don't receive anything in the next week and a half, you are the first in line.

She could be yours!

PM sent

MOART reticle

Brand new and never mounted to a rifle. I got it for a build I was planning, put in in the mount, threw away the packaging and then never ended up building the rifle. Price is $2,850 Shipped

Not to hijack the thread, but I happen to have two that I have never fired personally, as well as some new brass and bullets id be willing to part with if someone would like to enter the Tokarev game

CZ 458 Lott for sale I have Nosler Solids and partition ammo for sale sell if interested well at $210 a box Price for rifle alone is $2,000 Plus shipping

Ruger Number 1 Chambered in 375 H&H $2,000 Plus Shipping

Montana Rifle Company Model 1999 Professional Hunter $5,000 Plus Shipping

ALL STILL FOR SALE

Remington 700 stainless chambered in 300 WSM with probably less than 60 rounds through it. Does have gouge at back of cheekpiece. $1,000 plus shipping

Thank you so much for adding to this! I am glad to see the bottoms are not solid. You have helped me make up my mind haha. Absolutely beautiful.

I have been looking hard at the Westley Richards haha I don't know how I feel about the bottoms being closed though.. it would be nice to have the open bottom to assist in extraction as you would then be able to press upward from the bottom if it was a bit tight.

yes

Both the 458 Lott brass and the 416 Taylor dies are what you might call "unobtainium". I am currently on and have been a waiting list for a while to have 416 Taylor dies made and i'd imagine I still have another long few months at least! As far as Lott brass goes, I finally just broke down and...

The fact that it was a used barrel and on such a hot cartridge, the steel hardened up. A lot of gunsmiths either won't rechamber a rifle that has been fired or they will only do it if it hasn't been shot but a few times because of this.

I am having Butch Searcy build me a 375 flanged for hunting Elk and Bear. Might even get a chance one day to take it to Texas one of these days and take a couple boar!

As the reamers get used the tolerances change and the chambers are not as perfect. Some cartridges you can get away with multiple chamberings (ie 600 overkill, 500 nitro etc), but your bottleneck cartridges that remove a lot more material wear down quite quickly and if one wants to hold tight...

Its super easy to neck up 460 Weatherby brass. Just run them through the sizer die and bingo bingo you are good to go.

Thank you. It is a really nice rifle and I love the cartridge as well, but unfortunately for my pocket book, I have found a love for double rifles.. I know I will regret selling this, but life goes on and as our tastes/desires change we start a new journey. I suppose if money grew on a couple...

If you are stalking and want to remain quiet... The Vibram Five Fingers If you don't have to be quiet, then I recommend the Kenetrek "Safari" boot. I have two different pairs of Kenetrek's and absolutely love them.

I would say you are on the right track...Could have very well purchased a diamond in the rough that somebody never shot (or shot extremely little). Otherwise I would say it just needed a good deep cleaning to remove fouling, but from what you described, id lean more along the lines of you having...

I am not 100% sure, but I would agree that is what I believe them to be. They are wonderful QD rings!

13 3/4 from center of trigger to end of butt pad and it weighs 9.13 pounds with the quick detach rings on the rifle as pictured.

The 416 Taylor is a 458 win mag necked down to 416.Robert Chatfield-Taylor wanted a cartridge that would provide ballistics comparable to those of the .416 Rigby, but fit in a standard length action. 400 Grain bullet at 2350 fps

I have for sale, a Winchester Pre-64 action that McGowen Custom Barrels built on and chambered in 416 Taylor that has never had a bullet down the tube. The price is $3,000 plus shipping. Also for sale Ruger #1 in 416 Remington Magnum-$2,000 plus shipping and would prefer to sell all of the...