Search results

  1. S

    Uberti Courteney... again....

    I was lucky enough to get one last summer, bought it just because of its' cool looks, but really wished it was a 30-40 Krag. The new chambering will be .45-70 this year.
  2. S

    Rimmed Ammo For Sale GECO 7x65R & 7x57R

    Are they 200 round cases?
  3. S

    For Sale 358NM & 225 Win Ammunition, 9.3x74R Brass & Galco Ammunition Dump

    My 9.3x74R brass and Galco Double Duty arrived. Everything is as described, very satisfied. Thank You
  4. S

    For Sale 358NM & 225 Win Ammunition, 9.3x74R Brass & Galco Ammunition Dump

    I'll take the 9.3x74R Brass and the Galco Ammo Dump
  5. S

    Crf Rifles Encountered While Hunting?

    As a gunsmith, I owned several Ruger M77 MK II rifles when they first came out. The problem was that the bolts on many of them were improperly machined and were NOT CRF. I have attached a picture from a .223, but have seen it in .308, .30-06, .270 and .338. You can see that the relief in the...
  6. S

    What to use for grouse

    28 gauge and don't look back, they are perfect. And just as a side note, I've shot grouse with 12, 16, 20, 28 gauge and .410. The 28 in a nice double gun is almost perfection.
  7. S

    30 Day Review of a Rigby Highland Stalker in 275

    Thanks for the write-up, I have been looking at the .275 Rigby HS hard. What do you think of the hex-lock scope mounts?
  8. S

    Action Rockwell Hardness

    Thank you for the information.
  9. Pre-64 model 70 Bolts

    Pre-64 model 70 Bolts

    The Pre-64 model 70's all used the same overall length receiver. The bolts for the long and H&H length cartridges didn't have a piece like that, but the bolts used for the short cartridges; .243, .308, .358, etc. did have a piece similar to that. It was brazed onto the extractor retaining band...
  10. Pre-64 model 70 Bolts

    Pre-64 model 70 Bolts

    The Pre-64 model 70's all used the same overall length receiver. The bolts for the long and H&H length cartridges didn't have a piece like that, but the bolts used for the short cartridges; .243, .308, .358, etc. did have a piece similar to that. It was brazed onto the extractor retaining band...
  11. S

    M70 bolt, Wondering what is the use of that piece...

    The Pre-64 model 70's all used the same overall length receiver. The bolts for the long and H&H length cartridges didn't have a piece like that, but the bolts used for the short cartridges; .243, .308, .358, etc. did have a piece similar to that. It was brazed onto the extractor retaining band...
 
Top