Am I being silly?

NJC said:
I chose to order a 375 flanged (with scope in claw mounts). Chris let me know the rifle shipped to the states the week before Christmas so I should have it in the next couple of weeks. I might be ready for it to get here - as you can see from the picture
As for hunting, I am just a good old boy from Idaho so my hunting has been restricted to DIY western US game, nothing as interesting as the opportunities you have available to you.

View attachment 381475
Click to expand...
Look forward to seeing it NJC. What decided you on the 375 Flanged? I do believe it is superior to the 375H&H. Great gun to bring out to Africa some time.
 
Royal27 said:
I'd be starting on that 1-2 year exercise now .....
Click to expand...

I was in a hurry this morning when I typed this. So I'm gonna add on. I really only see two choices:
  1. Get it fixed
  2. Throw it as far into the Zambezi as you can
Whichever choice is made I'd get started on it today.

No way I'd trust that rifle even with new ammunition. It may not have a problem opening up today, but what about tomorrow? Hate got the first issue to be while shooting at an elephant or buffalo!
 
I have addressed this problem in some cheap lever guns by using brass with the thickest flange........ does ok.............not an option for you, I suspect........good luck...................FWB
 
PHOENIX PHIL said:
Very disappointing to read this. VC has a good reputation and it seems this rifle should never have made it out their door in this condition. Seems the situation is that you can't rely on it and it would be dishonest to not divulge the problems to a potential buyer of the rifle, thus you probably can't sell it without taking a beating on the price. So I agree with the others in getting that 1-2 year clock ticking now and send it back to VC for repair.
Click to expand...
Agree on all points. I considered destroying ir if VC cant fix it or it is just too hard. But lets give that a try first.
 
NJC said:
I chose to order a 375 flanged (with scope in claw mounts). Chris let me know the rifle shipped to the states the week before Christmas so I should have it in the next couple of weeks. I might be ready for it to get here - as you can see from the picture
As for hunting, I am just a good old boy from Idaho so my hunting has been restricted to DIY western US game, nothing as interesting as the opportunities you have available to you.

View attachment 381475
Click to expand...
@NJC. So you are the one who has been hoarding all the 375 flanged ammo!! No wonder I can’t find any. ;)
 
I was looking for the most versatile, do everything cartridge I could get, something I could use on an eventual trip to Africa but not be completely unrealistic for use in my normal hunting. The heym rep in NA (Chris Sells) was also amazing and walked me through the pro’s and cons of the 375 flanged vs the 450/400.
I have some experience with rimless cartridges in break action pistols that made me shy away from the 375 H&H for a break action, although I love that cartridge in my talkeetna and ruger no.1
 
Kevin Peacocke said:
Agree on all points. I considered destroying ir if VC cant fix it or it is just too hard. But lets give that a try first.
Click to expand...
If getting it back to VC is too much of a hassle can you get it back to SA easier?
 
NJC said:
I was looking for the most versatile, do everything cartridge I could get, something I could use on an eventual trip to Africa but not be completely unrealistic for use in my normal hunting. The heym rep in NA (Chris Sells) was also amazing and walked me through the pro’s and cons of the 375 flanged vs the 450/400.
I have some experience with rimless cartridges in break action pistols that made me shy away from the 375 H&H for a break action, although I love that cartridge in my talkeetna and ruger no.1
Click to expand...
My 375 H&H is also a Ruger No1 Tropical, excellent rifle.
There was a post on AH a few years ago where someone debated the 375 FL vs the 375 H&H and concluded that the slightly lower velocity of 2400fps for the FL was perfect. Kevin Robertson concurred. Do you know yet what the weight of your new Heym is? I believe it comes in different frame sizes and I am hoping it isn't unnecessarily heavy.
 
Hi Kevin. I was hoping you could clarify a few things. You said that factory ammo didn't split but that only the reloads had the problem. Likewise the action opening only happened when the cases split ie with the reloads. You also said the headspace was way out, 12 & 24 thou (and yes that is massive).

Did you measure check the headspace with guages or using cases, if cases, were they virginal or fired and resized?

Likewise, have you checked the headspace measurements of a factory round vs a fired case vs a resized case? A tool like the Hornady Headspace Comparator kit can be useful for this.

Where I am going with this is that given the time, costs and hassles involved in sending the gun back to VC, you need to eliminate all the ammo issues first. If the only cases giving problems are resized reloads it could be that the resizing die is faulty or needs adjustment to fit your individual rifle. A lot simpler and cheaper to fix.
ps. Are you using a 375 Flanged Magnum die or a 375 H&H die? (The only reason I ask is that I have heard some claim the cases to be identical bar for the rim. This is sufficiently incorrect to give problems.)
 
Kevin Peacocke said:
Yes I did buy it new in Johannesburg and then imported it to Zimbabwe, a huge exercise. I did report it to the gun shop there, but it seems the remedy will involve sending it back to France, ie re-exporting it from here to SA, then another permit to export it from there to France, then the same in reverse. Literally a 1 to 2 year exercise and I dont think I have the energy. I will nevertheless report it formally as I agree they need to know, but I am not holding my breath for a remedy. I am not angry with VC, they make excellent rifles, this was just a mistake I am sure.
Click to expand...

Kevin Peacocke said:
Agree on all points. I considered destroying ir if VC cant fix it or it is just too hard. But lets give that a try first.
Click to expand...

Hunter4752001 said:
Hi Kevin. I was hoping you could clarify a few things. You said that factory ammo didn't split but that only the reloads had the problem. Likewise the action opening only happened when the cases split ie with the reloads. You also said the headspace was way out, 12 & 24 thou (and yes that is massive).

Did you measure check the headspace with guages or using cases, if cases, were they virginal or fired and resized?

Likewise, have you checked the headspace measurements of a factory round vs a fired case vs a resized case? A tool like the Hornady Headspace Comparator kit can be useful for this.

Where I am going with this is that given the time, costs and hassles involved in sending the gun back to VC, you need to eliminate all the ammo issues first. If the only cases giving problems are resized reloads it could be that the resizing die is faulty or needs adjustment to fit your individual rifle. A lot simpler and cheaper to fix.
ps. Are you using a 375 Flanged Magnum die or a 375 H&H die? (The only reason I ask is that I have heard some claim the cases to be identical bar for the rim. This is sufficiently incorrect to give problems.)
Click to expand...
If @Hunter4752001 is correct then that’s something to consider. But also you said the gunsmith says the headspace is excessive, if so and it’s out of spec then that is not acceptable and you should not have to compensate for that or to that degree.

In Australia an Importer would be the middle man and should manage the warranty problems, there fore they should send it back arranging exports and all or Arrange repairs with an authorised gunsmith.

Step 3 , threatening to destroy it shoul get the attention of @VERNEY-CARRON COLLECTION for some assistance. Destroying it to make safe is costly to you. You should not have to just deactivate or destroy a new rifle that came out of spec from new.

It sounds like it should be repaired or replaced under warranty, I hope that happens and the timeframe is much more acceptable than the anticipated one. If you don’t get some help on this I can see Heym getting more consideration and recommendations on this site.
 
What @Hunter4752001 said makes a lot of sense, especially the use of the Hornady tool - assuming there is a bushing that works with the 375 Flanged shoulder.

The only thing I might add, and ive never reloaded for a double, is to back off on the sizing die to effectively reduce the Headspace by about .010". But then use the reloads for Practice Only, since brass fired in the upper barrel will very likely not chamber in the bottom barrel.
 
CBH Australia said:
If @Hunter4752001 is correct then that’s something to consider. But also you said the gunsmith says the headspace is excessive, if so and it’s out of spec then that is not acceptable and you should not have to compensate for that or to that degree.

In Australia an Importer would be the middle man and should manage the warranty problems, there fore they should send it back arranging exports and all or Arrange repairs with an authorised gunsmith.

Step 3 , threatening to destroy it shoul get the attention of @VERNEY-CARRON COLLECTION for some assistance. Destroying it to make safe is costly to you. You should not have to just deactivate or destroy a new rifle that came out of spec from new.

It sounds like it should be repaired or replaced under warranty, I hope that happens and the timeframe is much more acceptable than the anticipated one. If you don’t get some help on this I can see Heym getting more consideration and recommendations on this site.
Click to expand...
I know nothing about the import export laws where the OP lives, but if it is indeed a 1-2 year process for a repair, VC ought to consider making him a new rifle and simply replacing it if that's any faster and less time for him being without. Not that they care about my opinion, but it would be something I would inquire about if I was in the OPs shoes and a brand new rifle had such major issues...or propose a return and refund situation
 
Curing a headspace problem is not a big deal if the barrel is detachable but that isn't the case with break actions. As noted, you can expand the neck then neck down to the appropriate length to get a firm headspace, but that will result in the portion of the case in front of the rim being unsupported, so as noted the best solution would be for the maker to correct it.
 
On my understanding, flanged (rimmed) cartridges like the 375 Flanged Magnum headspace on the rim and not the shoulder. Kevin made no mention of popped or excessively flattened primers which suggest that rim recess dimension may be OK. (Still needs to be checked by someone with far more real knowledge than me). The position of the shoulder can be adjusted via backing off the resizing die. I know some rimmed designs were made with a deliberately long chamber to allow reloading in instances where dust/mud debris etc may have entered the chamber. (possibly important in the case of a Dangerous Game rifle or a combat rifle) Of course that was a practice predicated around the use of factory ammo only. I don't know if it is the case with the VC.

I know I'm showing my ignorance, but I would have thought that in Zimbabwe or South Africa, there would have been gunsmiths with a knowledge of double rifles and who would be able to at least diagnose the problem (even if they aren't VC authorised to do warranty repairs).
 
You must log in or register to reply here.

Members online

... and 1111 more.
Total: 18,284 (members: 1,161, guests: 17,123)

Forum statistics

Threads
54,053
Messages
1,144,300
Members
93,510
Latest member
arecruitment880
 

 

 

Proudly sponsored by

Latest posts

Latest profile posts

HENRY GRIFFITHS SAFARIS
HENRY GRIFFITHS SAFARIS
Black wildebeest hunted this week!
•••
C
Cwoody wrote on Woodcarver's profile.
Shot me email if Beretta 28 ga DU is available
Thank you
•••
P
Pancho wrote on Safari Dave's profile.
Enjoyed reading your post again. Believe this is the 3rd time. I am scheduled to hunt w/ Legadema in Sep. Really looking forward to it.
•••
HENRY GRIFFITHS SAFARIS
HENRY GRIFFITHS SAFARIS
check out our Buff hunt deal!

Buffalo Hunt with Henry Griffiths Safaris $10000

Here with is our offer for a hunt of a...
www.africahunting.com www.africahunting.com
•••
HENRY GRIFFITHS SAFARIS
HENRY GRIFFITHS SAFARIS
Because of some clients having to move their dates I have 2 prime time slots open if anyone is interested to do a hunt
5-15 May
or 5-15 June is open!
shoot me a message for a good deal!
•••

Share this page

 
Top