Under 40 days —— Arrrrrrrrgh

fourfive8 said:
A laminated stock is basically pretty strong. But.... obviously not for every calamity. Even the new stock needs to be relieved in the correct areas and then glass bedded. Probably enough time to order a kit, receive it and finish well within the 3 week limit. BUT, if you've never bedded a rifle, maybe best not to try it in this situation. Probably best to just do some judicial relief and hope it works. Depending on the model of Ruger, they aren't quite as straight forward for bedding as a Rem or Win would be. The other alternative also maybe the best- a good synthetic as has been suggested. Good luck. No fun running into such issues on such short notice before a big trip like this.
Click to expand...

This is the GSR in 308. I’ve had it about 2 years now, probably run over 1,000 rounds thru it. The stock I grabbed today is identical to the one that cracked. I’ll run it to the range a few times before I go. I’m pretty sure it will be fine for the trip. When I get back I’ll look into doing something more with it.
 
One Day... said:
I am no Ruger rifle expert - matter of fact I do not own any - so I do not know if the following suggestion applies, but IF your rifle would fit in this stock, I would suggest that there is no better stock in this price range, and there are many stocks that cost a whole lot more and that are not better, and if anything not as good...

I have these on .300 Wby, 340 Wby, .375 H&H, .416 Rigby and a few other lesser calibers and they are just plain indestructible, not to mention very attractively finished and about perfectly shaped and perfectly engineered with full length aluminum bedding block from front swivel to stock wrist, built-in bedding pillars, floated barrel, great Decelerator pad, and a nice choice of colors...

And priced at $300, what is there not to like :)

View attachment 331611
Click to expand...

Sorry to side track... but do they need finishing to fit correctly ?....just wondering for cz in 500 Jeffery
 
spike.t said:
Sorry to side track... but do they need finishing to fit correctly ?....just wondering for cz in 500 Jeffery
Click to expand...

Good evening Spikey,

Yours truly does not own any synthetic stocks.
They however, are probably the best insurance against splitting from recoil.
On the other hand, for those of us who cling to the old fashioned wood stocks, a simple remedy is available.
No doubt you are fully aware of this already.
But, there may be fellows here that are new to the larger bore rifles.
Anyway........

I experienced a split stock from recoil (split at the tang), on a .338 I had moved to Alaska with, way back in 1982.
Now, any stout recoiling repeater that I have owned since then, was/is delivered to a Gunsmith for cross pins and glass bedding.
It’s been worth the money in trade for peace of mind, imo.

Cheers,
Doggy.
 
Last edited:
spike.t said:
Sorry to side track... but do they need finishing to fit correctly ?....just wondering for cz in 500 Jeffery
Click to expand...
Absolute drop in for my three CZ 550 (.300 Wby .375 H&H .416 Rigby), two Mark V (.257 Wby .340 Wby), three Win 70 Classic (.300 Wby and my two sons' 7 mm Rem Mag & 7 mm Rem Mag) :)

Velo Dog said:
Good evening Spikey,
Ever since I experienced a split stock from recoil (split at the tang), on a .338 I had moved to Alaska with, way back in 1982, any stout recoiling repeater that I have owned since then, was delivered to a Gunsmith for cross pins and glass bedding. It’s been worth the money in trade for peace of mind, imo. Cheers, Doggy.
Click to expand...

Yes indeed! Same reasoning here, Africa is too far and too expensive to risk this happening in the bush :)

The only remaining risk after bedding & cross pining is a breakage at the wrist.

upload_2020-2-23_11-34-25.png

(Picture Ronald Berry)

The Bell & Carlson addresses this with the aluminum chassis going through the wrist area.

upload_2020-2-23_11-26-57.png
 
Last edited:
+1 for the Bell & Carlson. You can’t buy a better stock for the money, in my opinion.
 
One Day,
Will the B&C Mauser “Sporter” style stock for a “standard” contour barrel listed on their website, fit an Interarms Whitworth.375 with the heavier barrel? Maybe the stock needs modified? Thanks!
CEH
 
sestoppelman said:
You broke a stock in .308?! :eek::confused: Something must have been really messed up inside that stock?:(
Click to expand...
I second this, Glad you seem to have it figured out!
Only time I have ever broken a stock, I was using it as a club. I was trying to deer hunt in a cow pasture, and one of my cows decided I was to close to her baby.
 
CoElkHunter said:
One Day,
Will the B&C Mauser “Sporter” style stock for a “standard” contour barrel listed on their website, fit an Interarms Whitworth.375 with the heavier barrel? Maybe the stock needs modified? Thanks!
CEH
Click to expand...

I do not know that a Whitworth rifle will bed into the aluminum bedding block of the B&C Mauser 98 stock and that its bottom steel will fit in its inletting, but I am quite confident that it will work in this B&C model. I would suggest you call them, they are quite helpful and have dealt with quite a number of actions through the years...

upload_2020-2-23_13-55-46.png


The barrel contour is less of a concern. A barrel channel that is too narrow is easily and professionally opened by wrapping a wood dowel with sand paper and progressively sanding it wider & deeper.
 
Last edited:
One Day... said:
I do not know that a Whitworth rifle will bed into the aluminum bedding block of the B&C Mauser 98 stock and that its bottom steel will fit in its inletting, but I am quite confident that it will work in this B&C model. I would suggest you call them, they are quite helpful and have dealt with quite a number of actions through the years...

View attachment 331691

The barrel contour is less of a concern. A barrel channel that is too narrow is easily and professionally opened by wrapping a wood dowel with sand paper and progressively sanding it wider.
Click to expand...
Thank you! I will contact B&C.
 
One Day... said:
Absolute drop in for my three CZ 550 (.300 Wby .375 H&H .416 Rigby), two Mark V (.257 Wby .340 Wby), three Win 70 Classic (.300 Wby and my two sons' 7 mm Rem Mag & 7 mm Rem Mag) :)



Yes indeed! Same reasoning here, Africa is too far and too expensive to risk this happening in the bush :)

The only remaining risk after bedding & cross pining is a breakage at the wrist.

View attachment 331680
(Picture Ronald Berry)

The Bell & Carlson addresses this with the aluminum chassis going through the wrist area.

View attachment 331679
Click to expand...
This also illustrates the downside to fancy figured stock wood. It may look nice but for anything much over an '06 one is better off with straight grain wood, especially at the grip/wrist area which is a weak point.
 
BeeMaa said:
Do you believe the Ruger was poorly bedded or a problem in the laminate?
Maybe something else?
Click to expand...
It could be several things. I had the stock off to put recoil reducers in and something may have not lined up just right when I put it back on. I love Rugers but they are cheaply made.
Philip
 
sestoppelman said:
You broke a stock in .308?! :eek::confused: Something must have been really messed up inside that stock?:(
Click to expand...
Yeah, per another thread, I hope your not planning to hunt Eland with the .308? Ha! Ha!
 
That is the one of a few advantages in synthetic stocks..... no imperfections in the wood/grain/weaknesses/etc. nevertheless I own several of each. They each have pros/cons. However, it’s hard to believe the recoil from a 308 caused this. More likely, a fissure or weakness in the stock. Just a bum deal. Remove & replace.
 
Edster, to me the change in POI sounds excessive, did you see any reason why that should occur?
 
You must log in or register to reply here.

Members online

... and 1054 more.
Total: 16,757 (members: 1,104, guests: 15,653)

Forum statistics

Threads
54,066
Messages
1,144,821
Members
93,545
Latest member
propercapsules
 

 

 

Proudly sponsored by

Latest posts

Latest profile posts

HENRY GRIFFITHS SAFARIS
HENRY GRIFFITHS SAFARIS
impala hunt!
•••
HENRY GRIFFITHS SAFARIS
HENRY GRIFFITHS SAFARIS
Black wildebeest hunted this week!
•••
C
Cwoody wrote on Woodcarver's profile.
Shot me email if Beretta 28 ga DU is available
Thank you
•••
P
Pancho wrote on Safari Dave's profile.
Enjoyed reading your post again. Believe this is the 3rd time. I am scheduled to hunt w/ Legadema in Sep. Really looking forward to it.
•••
HENRY GRIFFITHS SAFARIS
HENRY GRIFFITHS SAFARIS
check out our Buff hunt deal!

Buffalo Hunt with Henry Griffiths Safaris $10000

Here with is our offer for a hunt of a...
www.africahunting.com www.africahunting.com
•••

Share this page

 
Top