Buffalo Target

hunting4sanity

AH enthusiast
Joined
Dec 27, 2013
Messages
309
Reaction score
207
Location
eastern Washington
Media
27
Hunting reports
Africa
2
USA/Canada
1
Member of
RMEF, DU, SCI, NRA
I'm looking at making a buffalo target for a local shooting range. I'm planning on using AR500 steel and something similar to this picture (it still needs work), the thin white lines along the jaw-line and horn-line would be thin cuts in the steel to differentiate the head. To get the proportions correct, I'm looking for information on how wide a buffalo is ear-tip to ear-tip and how wide on the outside of the horns a buffalo like this would be? Thanks for any help you can offer.
Buff3 copy.jpg
 
In my experience buff ear to ear is roughly 36"...used as a guide to judge horn width when possible.
 
If going according to the books you will work with roughly 33" ears and 36" spread on the pic
 
Thank you for the input. I'm hoping to make the target realistic in size so that whatever distance or position it's shot from the feedback is accurate.
 
Thank you for the input. I'm hoping to make the target realistic in size so that whatever distance or position it's shot from the feedback is accurate.
Buffalo are usually shot at close range. Are you concerned about ricochet?
 
I like the project you are doing, it is a great idea. To my eye the proportions of your target are a bit off, the head is too big / the chest too small. Just an opinion, you may want to measure several photographs for correct ratios. Why not just paint the lines that you have indicated will be thin cuts? The target will last longer, especially with buffalo-suitable bullets fired at it. It's not difficult to touch up the paint lines when they become too smudged.
 
Hang your steel on chains so it can swing. It will eliminate ricochet. The bullets willl fragment and cut a groove in the ground below the target
 
Well, if you’re making good shots at 50 or 100yds anything closer should be fine for accuracy
 

Forum statistics

Threads
53,985
Messages
1,142,281
Members
93,339
Latest member
CharlineDu
 

 

 

Latest profile posts

Cwoody wrote on Woodcarver's profile.
Shot me email if Beretta 28 ga DU is available
Thank you
Coltwoody@me.com
Pancho wrote on Safari Dave's profile.
Enjoyed reading your post again. Believe this is the 3rd time. I am scheduled to hunt w/ Legadema in Sep. Really looking forward to it.
check out our Buff hunt deal!
Because of some clients having to move their dates I have 2 prime time slots open if anyone is interested to do a hunt
5-15 May
or 5-15 June is open!
shoot me a message for a good deal!
dogcat1 wrote on skydiver386's profile.
I would be interested in it if you pass. Please send me the info on the gun shop if you do not buy it. I have the needed ammo and brass.
Thanks,
Ross
 
Top