JeffD
AH veteran
- Joined
- Nov 19, 2015
- Messages
- 220
- Reaction score
- 214
- Location
- Central Coast, California
- Media
- 41
- Member of
- San Luis Obispo Sportsman Association
- Hunted
- USA, Zambia, New Zealand, Namibia
This is a Husqvarna marketed 30-06 from the early to mid-1950s. Old bluing removed and metal slightly polished in prep for a re-blue. The bottom metal was then finished with Brownell's Oxpho Blue. Since the photos below were taken the bluing on the barrel has been more uniformly removed and the metal polished. It's drilled and tapped for a scope. The Husqvarna crest is quite nice and markings are crisp. Has the factory one-piece steel bottom metal. No trigger. Bolt has the Timney wing safety installed. This was going to be a little project but I've decided to do something else.
$350 shipped in the US to an FFL.
I have shot it a little and found that it did about 1.5" 5-shot groups at 100 yards with high-quality 165 gr. ammo.
PM
$350 shipped in the US to an FFL.
I have shot it a little and found that it did about 1.5" 5-shot groups at 100 yards with high-quality 165 gr. ammo.
PM
Last edited by a moderator:
