For Sale CZ 550 9.3x62 British Style

JeffD

AH veteran
Joined
Nov 19, 2015
Messages
220
Reaction score
214
Location
Central Coast, California
Media
41
Member of
San Luis Obispo Sportsman Association
Hunted
USA, Zambia, New Zealand, Namibia
I purchased this about a year ago from a local dealer, who consigned it from a fellow who made it his avocation to build rifle stocks. In this case, he acquired this CZ 550 American in 9.3x62 and did it up as a British sporter. He was going to make a trip to Africa, but that didn’t happen. As shown in the pictures, he reshaped the factory stock to include a pancake cheekpiece and shortened forearm. I’m not sure if he installed the barrel-band swivel or if that was done at the factory. He did install a Ruger steel grip cap, like those provided on No. 1 rifles. The finish, per a letter he wrote about the work, is a poly/oil blend. It is was also glass bedded with a floated barrel. The glass bedding is cleanly done. The trigger was tuned and is crisp at about 3 pounds. Feeding is smooth. He also did some load development and provided a box of handloads; those are Barnes TTSX bullets propelled by Varget. I shot one group with these (see last picture). I had mounted a 4x scope. My eyes are not what they used to be and with more magnification it probably would have been a better group. At least that’s the case with my other rifles. The letter said the gun was a good shooter and so it appears to be. It’s a fairly light rifle. I’d guess it’s about 7.25 pounds. The length of pull over the red Decelerator pad is just over 13.5 inches. The rifle is just as clean inside and out as it appears in the pictures. About the only thing to note is that he moved the rear sling swivel and filled the previous hole. I included that in the pictures.

 If Africa becomes a possibility for me again, I’ll probably take my favorite rifle, a No. 1 in 300 H&H, and something bigger suitable for buffalo. Email with questions to jeffrey davis phd (no spaces) at gmail dot com, or PM if that’s easier. I have larger versions of these pictures and some additional pictures as well. 




$995 shipped in the U.S.

tk932Lp.jpg


Xp62vo6.jpg


2jHPDnL.jpg


01nL3My.jpg


zgPl6Uv.jpg


R7d1kqg.jpg


rHwKejq.jpg


DLROxTS.jpg
 

Attachments

  • zgPl6Uv.jpg
    zgPl6Uv.jpg
    75.4 KB · Views: 166
  • Xp62vo6.jpg
    Xp62vo6.jpg
    174.4 KB · Views: 148
  • rHwKejq.jpg
    rHwKejq.jpg
    45.2 KB · Views: 153
  • R7d1kqg.jpg
    R7d1kqg.jpg
    63.9 KB · Views: 184
  • image.jpg
    image.jpg
    2 MB · Views: 170
  • DLROxTS.jpg
    DLROxTS.jpg
    115.1 KB · Views: 176
  • 2jHPDnL.jpg
    2jHPDnL.jpg
    140.2 KB · Views: 164
  • 01nL3My.jpg
    01nL3My.jpg
    64 KB · Views: 168
Last edited by a moderator:
Nice rifle, I really like the work done to it.
 
That will make a great Deer or PG rifle, you shouldn't have any trouble selling it. Since it is a CZ you might want to mention how it feeds multiple rounds from the magazine.
 
That will make a great Deer or PG rifle, you shouldn't have any trouble selling it. Since it is a CZ you might want to mention how it feeds multiple rounds from the magazine.


Well, it only feeds one round at a time from the magazine, of course! :) Actually, it feeds and extracts smoothly. No glitches, which I know can be a problem with some CZ rifles (it is with my CZ 527 varmint rifle in 223, and that is a single stack magazine.)
 
What's the barrel length? Do you do any trading?

I measured the barrel and it is 23 1/2 inches. Trades seldom seem to come together, but there are a couple things I would consider. A Leupold Vari-X3 or 3i, at least 10x max magnification and an adjustable objective would catch my interest. It would have to have an AO. I like Ruger No. 1 rifles but since there’s already several here I’m picky. Can’t think of other things at the moment. Thx
 
Looks a bit incomplete without quality iron sights, though.
 
Is this rifle still available
 
I will take it, per my AR PM

thanks
 
I will take it, per my AR PM

thanks


When it rains it pours. There were two "I'll take it posts," time stamped four minutes apart. It's listed on **NOT**PERMITTED** as well (no other forums except here). The other post was about 6 minutes earlier. I was out to lunch with a buddy and saw these when I returned. I hate these situations, but I don't know any other fair way to handle it except using the time stamp. Regardless, I apologize and hope you understand. If the other buyer should back out for some reason, I would be happy to offer it again to you before listing again. :(
 
The guy on AR is me Gale Johnson? I sent you a PM there
 

Forum statistics

Threads
53,992
Messages
1,142,655
Members
93,367
Latest member
ChadwickTo
 

 

 

Latest posts

Latest profile posts

Cwoody wrote on Woodcarver's profile.
Shot me email if Beretta 28 ga DU is available
Thank you
Pancho wrote on Safari Dave's profile.
Enjoyed reading your post again. Believe this is the 3rd time. I am scheduled to hunt w/ Legadema in Sep. Really looking forward to it.
check out our Buff hunt deal!
Because of some clients having to move their dates I have 2 prime time slots open if anyone is interested to do a hunt
5-15 May
or 5-15 June is open!
shoot me a message for a good deal!
dogcat1 wrote on skydiver386's profile.
I would be interested in it if you pass. Please send me the info on the gun shop if you do not buy it. I have the needed ammo and brass.
Thanks,
Ross
 
Top