Sako proper front sight for a Sako with Peep sight

Tokoloshe Safaris

Sponsor
Since 2017
AH legend
Joined
Apr 8, 2016
Messages
2,110
Reaction score
6,131
Location
Mlibizi, Zimbabwe
Website
www.tokoloshesafaris.info
Deals & offers
16
Media
76
Articles
1
Member of
Life Member Safari International, Life Members Dallas Safari Club
Hunted
Zimbabwe, South Africa, Tanzania
I am hoping some one can help me? I am supposed to come up with a front sight for a Sako, not sure what model but it is a factory .416 Rigby. I got this person a rear factory Peep sight, he never installed the rear sight. Now he has lost his front sight blade. If anyone know what style blade (side drift fit) or push in from the front and the proper height. The rifle is about a five hour drive away and he does not like going through all of our "New" Zimbabwe security roadblocks.
 
Is there any chance of getting photos or a description of the Sako?
Sako has a few Sako 85 models (current production) in .416 Rigby, but I think there have been some in out of production models too. The 85 has three lug bolts. At least the current Sako 85 Safari and 85 Brown Bear models can be had in .416 Rigby.

Here's Sako's spare parts catalog for current models: https://www.sako.fi/sites/default/files/documents/200195_Sako 85 sparepartcatalogue 23042018.pdf

There's something about sights, too.
 

Attachments

  • 200195_Sako 85 sparepartcatalogue 23042018.pdf
    732.3 KB · Views: 230
Last edited by a moderator:
Good old Zimbabwe, ZESA (our electric company) just went out! Daily occurrence. I have asked him to send me a picture of the action and a close up of the front sight. When does he need the sight? Now! When will he send me the picture? Maybe never! I looked at the rifle once before because he told me it was a genuine Rigby .416, In my disappointment I found it to me a SAko with a glossy stock in .416 Rigby! I have some high blade sights like Marble sights and then some NECG and Ruger blades. I do not kn0w if I have any high enough that I can fit.

Why doesn't he know what model rifle he shoots? I do not think there is answer for that question and you would choke if I told you his position in the hunting fraternity.
 
Glossy stock? Was it wood stock or laminate stock? I have a new Sako 85 Safari in .416 Rigby. Here are the sights of my rifle.
K1024_DSCF6733.JPG
K1024_DSCF6734.JPG



The stock however is matt oiled so not glossy at all...
 
Goeie dag Lon hoe gaan dit met jou
Pulled out my wife’s sako AV 375 HH and realized it only has a leapold 1.5—5. No sights. Guess she hasn’t let me mess with it too often sooo I’m not much help. Hope u r well. Jacques
 
The Sako 85 has a height adjustable front blade that slides in from the top of the ramp and pivots on a cross pin. The height is adjustable over several millimetres by using set screw in front of the blade - so if it's a model 85 you will need Sako's own sight but if you can locate one it should work Ok with the height adjusted.

if your friends rifle is an older Sako like the AV they use a dovetail style blade that drifts in from the side. The dovetail slot is metric measurement and I believe it measures the same as is used on many Mauser 98 rifles 5.26mm. It is certainly smaller than American standard 3/8" dovetail.

Brownell's in the USA sell a "Mauser' front sight that is a simple blade, made high so it can be filed down to the correct height. I predict it will work if your friend's rifle has that style of front sight blade. "078-050-000WB .375" Dovetail Front Sight Blank Steel Black" Hope that helps.
 
Sako's current spare parts catalog has both adjustable and dovetail front sights.
 
The Sako 85 has a height adjustable front blade that slides in from the top of the ramp and pivots on a cross pin. The height is adjustable over several millimetres by using set screw in front of the blade - so if it's a model 85 you will need Sako's own sight but if you can locate one it should work Ok with the height adjusted.

if your friends rifle is an older Sako like the AV they use a dovetail style blade that drifts in from the side. The dovetail slot is metric measurement and I believe it measures the same as is used on many Mauser 98 rifles 5.26mm. It is certainly smaller than American standard 3/8" dovetail.

Brownell's in the USA sell a "Mauser' front sight that is a simple blade, made high so it can be filed down to the correct height. I predict it will work if your friend's rifle has that style of front sight blade. "078-050-000WB .375" Dovetail Front Sight Blank Steel Black" Hope that helps.
Hi, Thanks a lot, I know I am going to have to take my "sights box" and I know that I have one of Brownells Mauser front blades, files, drift, brass hammer and my site-A-line and I should have him back in business. Now if one us can get the fuel to get together!
 

Forum statistics

Threads
53,613
Messages
1,131,104
Members
92,662
Latest member
andresonjames29
 

 

 

Latest posts

Latest profile posts

Early morning Impala hunt, previous link was wrong video

Headshot on jackal this morning

Mature Eland Bull taken in Tanzania, at 100 yards, with 375 H&H, 300gr, Federal Premium Expanding bullet.

20231012_145809~2.jpg
Living life like a lion for 1 day is better than living life like a jackal for 100 years.
 
Top