8x68s

Coldswede

AH senior member
Joined
Apr 12, 2017
Messages
52
Reaction score
35
Media
2
The parts have finally arrived!
Action: Magnum Hansen m704 classic
Barrel: Lothar Walther Magnum sporter profile to be cut to 27" / 68,5 cm

Stock: in the deciding phase but i think im going to use A HS precision stock.

I have been waiting for these components for quite some time now. The action got delayed several times. The action is gonna get blued by a friend of mine after christmas.

By chance i walked into the larger gunshop in the area and found the reloading components just long there on the Shelf aswell!

Now to source some brass for it.

Im gonna try and replicate normas factory ammo 200gr swift-a frame at around 910 m/s.


IMG_2734.JPG
IMG_2724.JPG
IMG_2725.JPG
IMG_2726.JPG
IMG_2717.JPG
IMG_2715.JPG
IMG_2713.JPG
 
Last edited by a moderator:
28 inch barrel may be better for the 8x68S
 
I think 27 will be well enough considering norma test shoots ammo in 26" inch barrels and its around their ballistic i want to replicate.
 
I am excited for you. That should be a very nice setup when it's finished. I have a 8X68s in a Blaser and the more I shoot it the more I like it and it has been easy to load for although I have not loaded any 200gr bullets.
HS makes good stocks but another stock you may consider is a Hogue Stock with the full bed block. It is very comfortable to shoot and really tames the recoil on my 8mm Rem Mag.
I don't know where you are located but here in the U.S. Huntingtons has 8x68s brass available in both Norma and RWS.
 
Last edited:
Love the 8x68 have a titan ii from Voere twin triggers don't think it has been fired much .....picked it up at auction ..... easy to get reloading components in Europe.

Very similar to the 8 Rem mag ...which I also have however the 8x68 is easier to reload for ...... than the 8mm rem mag and pushed lighter bullets accurately ....which is handy for probably 125gr to 250gr .........
 
Looks like the makings of a very fine rifle, Coldswede All the best with it.

Really like the 8x68 also, more so every time I hunt with it.
For southern Africa again next month, Namibia this time, I've seen Namibia mentioned in the same sentence as the 8x68 so often it had to be the first choice to bring this time. Will be shooting 220gn Sierra GameKings.
 
Looks like the makings of a very fine rifle, Coldswede All the best with it.

Really like the 8x68 also, more so every time I hunt with it.
For southern Africa again next month, Namibia this time, I've seen Namibia mentioned in the same sentence as the 8x68 so often it had to be the first choice to bring this time. Will be shooting 220gn Sierra GameKings.

Please give a report on how well the 220gr SGK's perform. I too have a load for the 8x68s with them but have not shot anything other than paper with them yet. Best of luck.
 
Excellent rifle , I am to commence with my 8x68S, have the dies, a lot of RWS brass, Obendorf Mauser action already dril/tap for a scope. I want to order a barrel , but this must be 29" long in a classic profile...the rifle stock needs to have a Mannlicher Schoenauer long and sleek design so I can walk and stalk with it as well...(y)(y)
 
I think I found a example of the stock I want to build for my 8x68 S rifle ...this is a Haenel 10.75 x 68 , I like this rifle stock design,,...I will make the fore-end longer since I want to order a 29.1 '' inch..barrel....I bought a set of claw mounts some time a go and will fit these claw mounts on the 8x68 S
7kZJShw.jpg
jNglVCB.jpg

bjsWpPt.jpg
 

Attachments

  • jNglVCB.jpg
    jNglVCB.jpg
    40.2 KB · Views: 213
  • jNglVCB-2.jpg
    jNglVCB-2.jpg
    40.2 KB · Views: 189
  • bjsWpPt.jpg
    bjsWpPt.jpg
    18.1 KB · Views: 174
Last edited by a moderator:
I will change the stock angle and make it a straight front to back rifle stock to absorb recoil..(y)(y)
Something like this stock, the oval rounds on the sides of this rifle stock and a Schnabel will suite this design just fine..
eMefs02.jpg

The rifle in the photo , the top one ...
nolTOPi.jpg
 

Attachments

  • nolTOPi.jpg
    nolTOPi.jpg
    63 KB · Views: 201
  • eMefs02.jpg
    eMefs02.jpg
    30.7 KB · Views: 232
Last edited by a moderator:
I will make use of the same trigger system that you encounter on the A and B Mausers...(y)
 

Forum statistics

Threads
53,636
Messages
1,131,704
Members
92,725
Latest member
hi88vipsite
 

 

 

Latest posts

Latest profile posts

Early morning Impala hunt, previous link was wrong video

Headshot on jackal this morning

Mature Eland Bull taken in Tanzania, at 100 yards, with 375 H&H, 300gr, Federal Premium Expanding bullet.

20231012_145809~2.jpg
 
Top