Depth of Cape Buffalo Shoulder Mount

lwaters · Apr 22, 2017

Red Leg said:
Regrettably, no. Finding studs is part of my trophy presentation planning.

You could get help from the McDowell Creek Community

Red Leg · Apr 22, 2017

lwaters said:
You could get help from the McDowell Creek Community

LOL. Already have some - and somewhat critical at that

Royal27 · Apr 22, 2017

PHOENIX PHIL said:
Wasn't that @Red Leg?

You're thinking of the minor reinforcement @Red Leg added to the gun room walls.

Red Leg · Apr 23, 2017

Royal27 said:
You're thinking of the minor reinforcement @Red Leg added to the gun room walls.

Ah yes. There was that trivial bit of steel. Hadn't considered it, but it likely would hold a buff - all of him. Though driving a nail could be tricky.

375 Ruger Fan · Apr 23, 2017

I will start building my retirement house very soon and will have a 20'x30' man cave with 16' +tall ceiling. Walls with be backed with 3/4" plywood and then sheetrock.

BWH · Apr 23, 2017

375 Ruger Fan said:
I will start building my retirement house very soon and will have a 20'x30' man cave with 16' +tall ceiling. Walls with be backed with 3/4" plywood and then sheetrock.

That sounds awesome. Please send & share details during the process. I'd love to see & hear.

kgesch · Apr 23, 2017

Mark19707 said:
Well this is going to be interesting... my buffalo is being stitched up into a pedastal wall mount as we speak... this thread is helpful!

Side question, has anybody spaned the gap in between studs with plywood and then sheeted with dry wall? We are building new and was considering doing this in some key areas for heavier mounts. My theory is it will be more secure and give more freedom for exact placement. Crazy?

We filled in spaces between studs in likely place with leftover floor joist material. Nice to be able to put the beast a little this way or that way. I attached a picture to show where we stuck some extra boards above the future gas fire place.

Mark19707 · Apr 23, 2017

kgesch said:
We filled in spaces between studs in likely place with leftover floor joist material. Nice to be able to put the beast a little this way or that way. I attached a picture to show where we stuck some extra boards above the future gas fire place.View attachment 181107

That's exactly what I mean! Sounds like the overwhelming opinion is to do "something" like that

Thanks!

tay50 · Apr 23, 2017

I did the same thing with my fire place knowing was going to hang my elk there, that way you don't have to have your mount off center if the stud isn't centered on the fire place.

kgesch · Apr 23, 2017

Mark19707 said:
That's exactly what I mean! Sounds like the overwhelming opinion is to do "something" like that

Thanks!

Here's the final product (excuse the clutter). I have some small animals to add yet, but having wood between the studs made life easier. We did this in other places in the studs as well. I also took pictures to remember where we put the extra wood.

Upton O. Good · Apr 25, 2017

A pedestal mount is a good option.

MT Griz · Apr 26, 2017

My buffalo mount is right at 4 foot from wall to nose tip, they really are a large animal both dead and alive! I also reinforced behind the sheet rock with plywood when building my house (hard to do- to retro fit an existing wall). I have seen some buffalo mounts that are more of the "head" and not so much of the shoulders...they don't stick out from the wall as much, but personally I don't like the way they look...my personal preference I guess. A pedestal mount could be an option but still takes up quite a bit of room abet not necessarily wall space. Good luck Iwaters with your decision and post a picture when you get it done.

Gsxrmike · Apr 26, 2017

Mine is four feet. I hired a company that hangs art in homes and commercial buildings. They confirmed the location of the studs I found when deciding the location for my mounts and the mounts seem very stable.

lwaters · Apr 26, 2017

MT Griz said:
My buffalo mount is right at 4 foot from wall to nose tip, they really are a large animal both dead and alive! I also reinforced behind the sheet rock with plywood when building my house (hard to do- to retro fit an existing wall). I have seen some buffalo mounts that are more of the "head" and not so much of the shoulders...they don't stick out from the wall as much, but personally I don't like the way they look...my personal preference I guess. A pedestal mount could be an option but still takes up quite a bit of room abet not necessarily wall space. Good luck Iwaters with your decision and post a picture when you get it done.

Got to shoot him first. Just thinking ahead. I will have to remove built in ironing board and can put a two by six block between studs. Going hunting in August.

Depth of Cape Buffalo Shoulder Mount

lwaters

Red Leg

Royal27

Red Leg

375 Ruger Fan

BWH

kgesch

Mark19707

tay50

kgesch

Upton O. Good

MT Griz

Gsxrmike

lwaters

Members online

Forum statistics

Proudly sponsored by

Latest posts

Latest profile posts

Buffalo Hunt with Henry Griffiths Safaris $10000

Share this page