7x72R Any info to share?

Neil Molendyk

AH fanatic
Joined
Jul 23, 2014
Messages
582
Reaction score
1,374
Location
Alberta Canada
Media
22
Hunting reports
Africa
2
Member of
SCI,CCFR
Hunted
Alberta Canada,Saskatchewan Canada, Namibia, Limpopo RSA, Eastern Cape RSA
Good day fellow forum members. A few years ago I came upon some 7x72R ammunition at an auction. The asking price was cheap for a couple of boxes, I didn't know what they were but my father in law has been gunsmithing and barrel making for 50 years so I thought he would have some idea. Turns out he had never heard of them. A little research has unearthed very little. I have found brass is available but costly, Cartridges of the World has a brief article about it and I think reloading dies can be ordered. I believe that the 7x72R was primarily found in combination German drilling firearms, shotgun and 7x72R formats. I am thinking that rebarreling a Ruger No. 1 might be an interesting project, say a 243 Win or 6mm Remington. Thoughts, advice or comments please. Thank you
 
just looking at it you would have to assume it started life as a black powder cartridge.
if so it would not have been a good one, as it would have fouled barrels badly.
as a smokeless it also leaves much to be desired.
a better choice might be 7x65 rimmed, or even better in a ruger no1, 280 rem.
should you want the 7x72 ballistics, just load the better cartridge back.
for a reduced performance round, the 7x30 waters exceeds the 7x72 in a more practical package.
bruce.
 
Thanks Bruce, no doubt in your assessment, Cartridges of the World ranks it power wise as a 30-30. It's just the unquietness of the calibre that intrigues me, certainly not its popularity or efficiencies. The Ruger No 1 platform is probably the easiest to accommodate the build, certainly will be strong enough.
Neil
 
The 7x72R was invented in 1927 by Wilhelm Brenneke.

It was standardized April 1930, together with the 8x72R (.318 dia. J bore) cartridge.

Both cartridges origin from the old black powder 9,3x72R, cases can be formed from.

7x72R and 8x72R never have been loaded with black powder.

The idea behind the 7x72R was, to create a 7mm low pressure cartridge for break open rifles.

CIP pressure is 2500 bar, 7x57R is 3000 bar, 7x57 is 3400 bar.

139 gr soft point round nose at 2400 fps was the standard load.

RWS and DWM discontinued production in the 60's and cartridges have to be reloaded since

I have never seen boxer primed cases, RWS 5620 Berdan Primer is required.

No rifles, or a few only, have been made after WWII.

The cartridge is considered to be ideal for the little roe deer, but marginal for red deer or pigs.


HWL
 
Thanks HWL for the information about the cartridge and firearm. It would make a nice rifle for the tiny ten. And unique.
 
  • Like
Reactions: HWL
The 7x72R was invented in 1927 by Wilhelm Brenneke.

It was standardized April 1930, together with the 8x72R (.318 dia. J bore) cartridge.

Both cartridges origin from the old black powder 9,3x72R, cases can be formed from.

7x72R and 8x72R never have been loaded with black powder.

The idea behind the 7x72R was, to create a 7mm low pressure cartridge for break open rifles.

CIP pressure is 2500 bar, 7x57R is 3000 bar, 7x57 is 3400 bar.

139 gr soft point round nose at 2400 fps was the standard load.

RWS and DWM discontinued production in the 60's and cartridges have to be reloaded since

I have never seen boxer primed cases, RWS 5620 Berdan Primer is required.

No rifles, or a few only, have been made after WWII.

The cartridge is considered to be ideal for the little roe deer, but marginal for red deer or pigs.


HWL
Beat me to it. ;)

It was indeed a nitro design, and if you can find a source for brass in addition to your two boxes, it might be a fun project for a light stalking rifle. A friend many years ago in Germany had a drilling in 16x16 / 7x72R. It was already unusual and fairly rare there at that time. He no doubt shot several hundred roe deer and foxes with that gun along with the occasional smaller pig for the pot.

It would work fine on our whitetail out to 150 yards or so with a fast opening SP of some sort. Published data will be non-existent so be cautious working up a load if you decide to go forward with the project.

If the brass looks like an impossible hurdle, I would be happy to wax eloquently about the virtues of the 7x65R.
 
  • Like
Reactions: HWL
Beat me to it. ;)

It was indeed a nitro design, and if you can find a source for brass in addition to your two boxes, it might be a fun project for a light stalking rifle. A friend many years ago in Germany had a drilling in 16x16 / 7x72R. It was already unusual and fairly rare there at that time. He no doubt shot several hundred roe deer and foxes with that gun along with the occasional smaller pig for the pot.

It would work fine on our whitetail out to 150 yards or so with a fast opening SP of some sort. Published data will be non-existent so be cautious working up a load if you decide to go forward with the project.

If the brass looks like an impossible hurdle, I would be happy to wax eloquently about the virtues of the 7x65R.

Looks like brass might be a doable do - though a bit of an investment.
 

Attachments

  • Screen Shot 2021-01-20 at 8.52.14 AM.png
    Screen Shot 2021-01-20 at 8.52.14 AM.png
    856.1 KB · Views: 83
  • Screen Shot 2021-01-20 at 8.52.18 AM.png
    Screen Shot 2021-01-20 at 8.52.18 AM.png
    776.5 KB · Views: 94

Looks like brass might be a doable do - though a bit of an investment.

Much easier with Boxer primed cases....sometimes life is easier in the Untied States.... (y)

A Ruger No.1 with an octagonal barrel in 7x72R is a rifle to dream of.


HWL
 
which raises the question.
why does the 7 x 65 rimmed exist today?
bruce.
 
The 7x65R also is Wilhelm Brennekes child.

He created the 7x65R in 1920 as a HIGH performance break open gun cartridge.

We only can speculate, why he saw a demand for the less powerfull 7x72R, seven years later.

Today, the 7x65R exists, because it withstood the test of time, the 7x72R did not.

Nontheless, beautiful rifles were made in 7x72R....

167x72R1.JPG
167x72R2JPG.JPG


16 ga 7x72R O/U hammer gun.......

HWL
 

Forum statistics

Threads
53,628
Messages
1,131,490
Members
92,688
Latest member
BobbyeriBlorm
 

 

 

Latest posts

Latest profile posts

Impact shots from the last hunt

Early morning Impala hunt, previous link was wrong video

Headshot on jackal this morning

Mature Eland Bull taken in Tanzania, at 100 yards, with 375 H&H, 300gr, Federal Premium Expanding bullet.

20231012_145809~2.jpg
 
Top