Which prefit limb saver for a Zastava M70?

[clockwork_7mm_gator]

Their CS isn't sure and wants me to print all the templates to cut out and test... I can do that if necessary, but hoping someone just knows?

Thanks!
M

 

[Mr. Zorg]

I'd like to know that myself!

Seeing Limbsaver has no idea, I'm gonna go with my Plan B for my 20" barreled 7X64mm. I picked up a plastic Interarms Mark X buttplate for a few $$$ on eBay, I'll have that replace the pad and use a slip-on Limbsaver Airtech pad I already own. It'll last longer anyway without the weight of a rifle pressing down on it in my safe anyway.

You could ask Limbsaver about Interarms Mark X, Whitworth, and Charles Daly Mauser to see if they have that info. Same manufacturer, same stock.

 

[clockwork_7mm_gator]

Mine has a butt plate; was planning to replace it after refinishing the stock. That's a good question, re: the other brands importing the same gun/stock. Sent it along to CS... will update here if they reply.

 

[Wade J VanGinkel]

I currently just removed the factory pad and used a slip on over the bare end.
If I remember correctly one of the templates was within a few thousands when I measured the pad.
But haven't ordered one yet

 

[clockwork_7mm_gator]

I currently just removed the factory pad and used a slip on over the bare end.
If I remember correctly one of the templates was within a few thousands when I measured the pad.
But haven't ordered one yet

Wade - if you end up finding the measurement and ordering, please let me know!

 

[CoElkHunter]

My two Whitworths And CZ 550s use a large size slip on Limbsaver. I slip them over the factory pad as I need the extra lop.

 

[Ridge Runner]

I replaced my Interarms Mark X .458 WM and my Zastava .375 H&H butt pads with LimbSaver, 1.5 inch thickness, medium, butt pads 10538.

These pads added the LOP I needed and LimbSaver advertises 80% reduce recoil.

Classic 1 inch thick: 10542
Trap 1 inch thick: 10535

These are grind to fit pads and include a template cut out.

Hope this helps.

 

[Rob404]

My two Whitworths And CZ 550s use a large size slip on Limbsaver. I slip them over the factory pad as I need the extra lop.

Ditto

 

[Mr. Zorg]

I replaced my Interarms Mark X .458 WM and my Zastava .375 H&H butt pads with LimbSaver, 1.5 inch thickness, medium, butt pads 10538.

These pads added the LOP I needed and LimbSaver advertises 80% reduce recoil.

Classic 1 inch thick: 10542
Trap 1 inch thick: 10535

These are grind to fit pads and include a template cut out.

Hope this helps.

Many thanks!

 

[Ridge Runner]

Many thanks!

You're Welcome.