416 Rigby build

medic_hunter

New member
Joined
Jan 31, 2023
Messages
3
Reaction score
0
I'm currently starting to build a 416 Rigby on a Mausingfield action with a K&P heavy #5 barrel. Having a hard time find a stock. Can either be a synthetic but prefer a wood one that isn't 7K. Still up in the air on who's bottom metal I'll use as they are tough to find in stock right now. Any suggestions on a stock and or bottom metal would be appreciated. I spoke with McMillin about a stock and they didn't seem interested and told me they were 6 months out anyway.
 
I am not familiar with Mausingfield but I looked up their web page. From what I could see they don't make an action for a .416 Rigby. I think .338 Win mag is as big as they go.
 
Very good. Good luck with your build.
 
that action uses the remington 700 foot print so you should be able to find a stock but the mag box might be a tough one to locate
 
that action uses the remington 700 foot print so you should be able to find a stock but the mag box might be a tough one to locate
You're thinking any LA Remy stock will work even with the bottom metal that I'm needing? Also what about the barrel contour inlet for the stock?
 
That is my understanding on the stock, but you would need at least a RUM magazine box. I would recommend calling Mausingfield and get the exact information from the source. For the barrel contour you will most likely have to open up the barrel channel. If this is something outside your skills and or comfort zone you will most likely need to get with a stock maker and see what they can do for you.
 
I'm currently starting to build a 416 Rigby on a Mausingfield action with a K&P heavy #5 barrel. Having a hard time find a stock. Can either be a synthetic but prefer a wood one that isn't 7K. Still up in the air on who's bottom metal I'll use as they are tough to find in stock right now. Any suggestions on a stock and or bottom metal would be appreciated. I spoke with McMillin about a stock and they didn't seem interested and told me they were 6 months out anyway.

I cant help you with an answer, but very interested in how you go with the build. I have the same action with the same bolt face as you have. Just earlier this week I was thinking about whether I could build a 416 Rigby on my action.
 
Not sure how your search is going. But I have looked around and I think the Hawkings Hunter bottom metal will work. Ive heard of guys building 300 Normas (COAL: 3.75") they wanted longer but werent able to find anything to work without a lot of hassle.

I think with those and LA flush magazines, you may get it to work.

Looking forward to the build.
 

Forum statistics

Threads
53,613
Messages
1,131,108
Members
92,664
Latest member
Leonslab
 

 

 

Latest posts

Latest profile posts

Early morning Impala hunt, previous link was wrong video

Headshot on jackal this morning

Mature Eland Bull taken in Tanzania, at 100 yards, with 375 H&H, 300gr, Federal Premium Expanding bullet.

20231012_145809~2.jpg
Living life like a lion for 1 day is better than living life like a jackal for 100 years.
 
Top