Old Faithful - My 7x57mm Mauser

Discussion in 'Hunting Africa' started by Kevin Thomas Safaris, Sep 11, 2013.

  1. Kevin Thomas Safaris

    Kevin Thomas Safaris AH Senior Member

    Joined:
    Jun 10, 2009
    Messages:
    70
    Likes Received:
    0
    My Photos:
    14
    Member of:
    PHASA
    Hunted:
    South Africa & Zimbabwe
    Old Faithful - My 7x57mm Mauser
    by Kevin Thomas

    Not too long ago I read an internet posting on Straight Shooter by an American called Ken who described the 7x57mm Mauser as "The Great Granddaddy of Modern Day Cartridges." It wasn't a long posting but it was an interesting read as he went on to describe how on 01 July, 1898, some 15,000 troops of the American Army attacked 700 entrenched Spanish soldiers on San Juan Hill in Cuba. The American Army had just adopted the Danish Krag-Jorgensen rifle in 30-40 Krag, in order to keep up with the global arms race after Frenchman Paul Vielle, invented smokeless powder in 1884.

    Of the 15,000 American troops who went charging up San Juan Hill, (many of them still armed with the archaic 45-70 Springfield), the 700 Spaniards soon inflicted at least 1,500 casualties, holding them off for twelve hours. This loss caused America to relegate the Krag-Jorgensen to the bin and the Springfield Armoury soon developed the 1903 Springfield rifle (whose action was a Mauser 98 copy) and the 30-30 Springfield cartridge, a sort of scaled up 7x57mm cartridge. It predated the 8x57 Mauser and the Mauser '98, which most bolt action rifles are based on.

    In the wake of the Anglo-Boer War too, and the British army's experience against the Boer's 7x57 Mauser's, they too, were forced to re-evaluate their ammunition and rifle design. This resulted in the Brits designing a Mauser-actioned 7mm (.276 Enfield); however, WW1 broke out before they could get it into service, so they reverted to the .303.

    In 1892 Paul Mauser designed the 7x57mm Mauser, one of the first rimless bottleneck cartridges, and the 7x57mm's design is the basis for most modern rimless cartridges including the 30-06 Springfield and all of its cartridge family. The Spanish Army first adopted the 7x57mm Mauser in 1893, and it was this cartridge which inflicted so many casualties amongst the American troops mounting the assault on San Juan Hill on that bleak day in July 1898.

    During the late 1800s a number of other countries in Central and South America, and following the lead set by Spain also adopted the 7x57mm as their official military cartridge. From a sport hunting perspective, the 7 x 57mm cartridge was an instant success and has remained so to this day. Virtually every game animal on the planet has been successfully hunted with the 7x57mm and William 'Karamoja' Bell shot in the region of about 1,000 elephants using a 7x57mm rifle (in the British equivalent, Rigby's .275) and this during a period when most ivory hunters preferred larger-caliber rifles.

    Bell chose the cartridge because of moderate recoil, and he used 175-grain solid bullets (with a velocity of about 2400fps) to ensure good penetration, which the 7x57mm does admirably due to its fast twist rate which enables it to fire long, heavy bullets, with a high sectional density. Having done his own thorough research, and aside from being a truly exceptional shot, Bell also had a sound knowledge of elephant anatomy and knew the exact size and location of the brain, from any angle, thus ensuring his bullet placement was precise. In the part of Africa he hunted, elephants hadn't yet learnt to fear man, lived in the main out in the open, away from dense cover, and were obviously a lot easier to approach.

    We must remember too, that at the time of Bell's hunting exploits, jacketed bullets and smokeless powder had only recently been invented, initially in the smaller military calibres, and this combination showed impressive penetration compared with black powder cartridges of that era which fired large-bore all-lead bullets thus, a lot of 'new generation' experimentation was taking place. Inevitably Bell realised the 7x57 was not a suitable elephant cartridge, and switched to a .318 Westley Richard's among other calibres, including a .416 Rigby.

    Lt. Col. James (Jim) Edward Corbett, an ex British Army officer and well known Indian hunter, owned two .275 (7x57mm) Rigby Mauser's, one of which is now in the possession of Paul Roberts in the UK, (at one time Paul owned the Rigby company before the name Rigby was sold). Corbett was a maestro with a gun, and an accomplished backwoodsman who aside from using a .450/.400 W.J. Jeffery & Co. boxlock double, also frequently used the .257 Rigby with a 173-grain bullet at 2,300fps to hunt a number of tigers, including the man-eaters of Kumaon, the various tigers who terrorized the villagers of the Kumaon region of India in the early 1930s. He later wrote about these exploits in a book titled Man-Eaters of Kumaon and another book The Temple Tiger.

    Well known American hunter and author Jack O' Connor's wife Eleanor, accompanied her husband on numerous safaris worldwide, killing small and large game with her favoured calibre, the 7x57mm.

    As a youngster growing up in 1950s Rhodesia, there was no shortage of 7x57 Mausers, most having been brought back post WW2 by returning ex servicemen. We Rhodesian kids of that era, witnessed nearly all of the hunting our elders did, being done with either the British ex military Lee Enfield Mk111 .303, or with a Mauser 7x57mm.

    My late dad had a 7mm Mauser and a .303 Lee Enfield, and although he wasn't an ardent sport hunter, he was a deadly shot, and with us living on the banks of the Sabi River for much of my boyhood, the old man couldn't pass up shooting any big crocs that dared to come out onto the sandbanks in front of our house for this task, he preferred the 7x57mm Mauser.

    In early 1968 when I first joined the Rhodesian National Parks & Wildlife Management department, a number of field stations that I served on had a 7mm Mauser in the armoury, and I used the calibre on and off throughout my service. It impressed me, and although the ammunition was 'issue' the brand now escaping me, I never had a glitch. Unable to afford one at the time on my meagre game ranger's salary, I vowed then, that one day I would own one, although it took a long time and only came my way as a gift, in 1986, through a generous client.

    Initially I thought it was a military version, due to its apparent full-length stock with handguard on top, so I had it 'sporterized'. I later learned that it was a commercial (sporting) Mauser known as the 'Afrika Model' which had a fore-end almost to the end of the barrel as well as a handguard. I learned that its pear-shaped bolt knob, double set triggers and quarter turn magazine floorplate lever, all identified it as a sporting version. I changed the double-set trigger. It is a WW2 Waffenfabrik Mauser Oberndorf with the serial number 76629. The rifle had hardly been used, and post WW2 had found its way across the Atlantic to America, no doubt with a returning US serviceman.

    Our middle son Keith, who at the time was 14-years old had already decided to embark on a career as a gunmaker, and part of his school holidays were spent with well known gunmaker Johan Morkel, who'd set up shop in Tarkastad. Under John's guidance, Keith removed the full stock and made me a no frills copy turned one this rifle was after all, intended for work, guiding on plains game, and for game management use. We also removed the military aperture sights and fitted the rifle with a fixed x4-power Tasco scope, an optic brand which had its detractors, however, the trusty 7x57 wore that scope for 22 years and it never let me down once. Being a working rifle in the truest sense, it was never molly-coddled, and took a pounding around much of Southern Africa, yet the Tasco held true.

    As an aside, after leaving school Keith did a five-year apprenticeship with Rigby & Co in London, then spent nearly nine years with Purdey's, and then seven years with Westley Richard's, before rejoining Purdey's as a PH it's useful having a son who's a gun maker.

    For a long time I used factory PMP in various bullet weights, mainly because handloading was a hassle while living back in Zimbabwe after the Ciskei. After returning to South Africa however, I started to use Nosler Partition 160-grain bullets extensively, and I sighted them in at about 2ï½½ inches high at 100m for handloaders, the 7x57mm is deservedly described as 'ballistician's delight'.

    My 7x57 is also hired on a regular basis by international clientele, who with today's heightened air travel security find it easier to just hire a rifle over here, rather than haul one through the sky. All of those folk who've used the 7x57 on their plains game go away totally satisfied with the results, and in 2009 I finally retired the old Tasco scope (still in fine fettle), and replaced it with a Leupold Vari-X 111 1.5-5 which works well.

    Sometimes I've pushed the envelope distance wise and animal size wise, when asking my 7x57 to perform and it hasn't failed me yet. Over the years, it has taken numbers of impala, warthog, blue and black wildebeest, blesbok, bushbuck, kudu, zebra, and gemsbok. Although I have shot eland a few times with it, let me go on record as stating that the 7x57 is not an adequate eland cartridge. In my defence, I have nearly half a century of game-ranging and professional hunting experience; I stalked to within sure shooting distance, and was supremely confident of my shot placement.

    Some years ago a client brought me over a box of 160-grain Nosler Spitzer AccuBond and I loaded up some test batches with variations of S355 before settling on 40grns(giving me 2345fps), which proved exceedingly accurate. The Nosler AccuBond bullet and load allowed my 7x57 to confidently step up to the plate on a variety of fairly testy shots, and it has now become my preferred bullet for all of my plains game hunting. When clients hire my rifle, I also ensure they use the 160-grain Nosler AccuBond bullets.

    Earlier this year, Jamie Cox brought out some friends from the UK on a quick plains game hunt, and we did our usual thing on Woodlands game ranch, courtesy Keith Gradwell. Given the group size, Keith and Doug Snow also joined us as PHs. My client, Jamie Ingram, used my 7x57mm with the 160grn Nosler AccuBond bullets.

    Interestingly, he'd never fired a rifle in his life, but was keen to do a bit of hunting (he's now sold on the sport). After some coaching at the rifle range bench, where Jamie quickly proved himself an extremely natural and accurate marksman, we went hunting.

    A kudu bull was the first animal he killed, using a clean well placed heart shot across a 208m steep sided valley. The bull careened downhill, tail flagging, before piling up in a spekboom choked donga. Our next animal was a fine black wildebeest; we took him from a blind out on the Bedford plains. It was a ranged 190m shot, and again, Jamie put the 160grn Nosler AccuBond into the shoulder, causing the bull to circle round us as if prancing on parade, before he sunk to his knees and then fell over sideways. These two species were followed by a blesbok and a warthog, both out at about 180m, and also cleanly grassed with single well placed shoulder shots.

    Earlier this season I was hunting with retired US Army Colonel Dale Ackels and his delightful wife Bet. Dale had brought over his 7mm Remington Mag, a long-time favourite of his and it was wearing a Leupold VX II, 3-9X variable, which he'd bought about 8 years back. Although he hadn't put it onto the rifle until 2012, and thereafter he'd only fired about 23 rounds with the scope/rifle combination, yet for some inexplicable reason it failed early during the safari. Coincidently Dale was also using 160gr Nosler AccuBond bullets, probably without doubt my preferred bullet for my 7x57mm Mauser.

    Although he killed his black wildebeest and kudu using his 7mm Rem Mag, the scope became really faulty later on when we were hunting impala and a hartebeest, leaving Dale little option other than to use my 7x57mm for the remainder of his safari. Upon his return to the US, and although the scope was long since out of warranty, he sent it back to Leupold who stood behind their product, repairing it, and returning it to Dale at no cost. They also sent him the diagnostic work sheet, leading him to quip that it was a wonder he even hit South Africa!

    More recently too, and over the previous two seasons I've had adequate exposure to the outstanding terminal performance of North Fork bullets in their heavy calibres on buffalo and giraffe while on safari in Zimbabwe, this actually led to my writing a magazine review about North Fork bullets for use on heavy-boned game. Wim Lambrechts of African Leadwood has the North Fork dealership here in South Africa and at the March 2013 Huntex Show he kindly gave me some North Fork 160gr SS (Semi-Spitzer) bonded core solid shank soft points to try out in my 7x57mm Mauser on plains game, (Wim well knows of my penchant for the Nosler AccuBond!) and I'm really looking forward to doing so.

    Strangely, very few of our younger generation PHs here in southern Africa show much inclination towards owning and using the venerable 7x57mm Mauser. I have spoken to a number of them around campfires in South Africa and Zimbabwe, and whilst all readily acknowledge the bullet has been well proven on the global battlefields of yesteryear, and right across Africa's hunting fields, they would still rather opt for another calibre such as a .300 Winchester Magnum obviously and correctly so, it is a case of horses for courses however, I also think it could be because they think the 7x57mm a little old fashioned, despite its accolades and sound track record.

    As I slowly head towards my twilight years, I've often thought about which rifle I'll keep when I can't physically hunt any longer. Although, and being a working PH by the time I decide to hang my guns up, I think my .375 H&H and my .458 Lott will be retired first. Quite simply because somehow, I can't think of myself giving up my 7x57, although I can see myself as a doddering old codger in a rocker on the veranda, my trusty old 7x57 across my lap, and still being lovingly oiled.
  2. Upepo

    Upepo AH Member

    Joined:
    Sep 6, 2013
    Messages:
    46
    Likes Received:
    0
    Great article.
    I don't know why I didn't think of this before - I need to have some coffee and wake up here :)

    There must occasionally be some guys on this hunting forum who are retiring and would like to sell a good used hunting rifle. I'm in the market for one ... right now. The nice thing about selling your kit to me - is that you know your old rilfe will be going to a "loving home". It sounds sentimental, but that's quite important. :)

    Anyway, I was expecting you to say you were going to sell the Mauser. I have actually been looking for a Swedish Mauser in 6.5 x 55. They are wonderful old guns, but hard to find for that reason. Anyway I am glad you're keeping your own Mauser. If anyone has a fine rifle in 6.5 or 308, let me know.

    cheers,
    Upepo, USA
  3. PHOENIX PHIL

    PHOENIX PHIL AH Legend

    Joined:
    Apr 15, 2009
    Messages:
    2,188
    Likes Received:
    36
    My Photos:
    23
    Member of:
    SCI
    Hunted:
    USA, S. Africa
    Great article Kevin. Winchester has been selling their Featherweight M70 in 7x57 this year. Over recent years, I have developed a nostalgic fondness for the "classic" calibers. I picked up a Ruger #1 in .300H&H in the spring. I've been looking at one of these FW's in 7x57. But if I buy another gun this year, the wife is really going to want some payback!

    I think you will love the performance of the North Fork bullets on PG. If you look up my hunt this year with HartzView Safaris, you'll see the results from 3 different calibers using NF bonded cores. That said, I found in the smaller calibers (.308 / .300WM) that they're sensitive to uniform necks. Having talked to NF directly, they readily will tell you this too. After getting fliers on the range every 3 to 4 shots, I was about ready to give up on them. But using Lapua brass in the .308 and Normal brass in the .300WM resolved that problem. The other option is neck turn your lesser expensive brass.

Share This Page