Verney Carron .500
This is a discussion on Verney Carron .500 within the Double Rifles forums, part of the Firearms & Ammunition category; Lang finished 001.jpg 470 001.jpg hi paul there are some before and after pics of my .470 lang. i bought ...
03-29-2012, 01:44 AM #21
03-29-2012, 10:19 AM #22
03-29-2012, 08:25 PM #23
Spike, it's probably a good thing that we handle our guns MUCH better than we are able to handle our p.c's !!!
None-the-less I can tell from the two pics that DID come through that the refurb job was done to a very high standard of finish.
I've heard and read much about the quality smithing work done by Paul roberts and co and would expect nothing less.
That old/new Lang of your looks as though she's ready for many more days afeild.
Personally, for my own use in a very humid and tropical environment, I would have been quite happy with her in the original condition, lesssening my concerns of wear and tear with constant use, as long as she shot straight and true.
I reccomend you consider and look into the C.E.B range of double bullets.
Bore riders (less barrel strain and slightly better vels), mono-metal brass solids and non-conventional hollow points currently doing some amazing work in the hunting feilds.
Thanks for sharing those images.
03-29-2012, 11:24 PM #24
paul couldnt you open the images in the follow on post as i can? i dont mind a bit of wear and tear on my rifles as long as i put it there! i like the slightly used look.
03-29-2012, 11:40 PM #25
Please keep trying, I'd like to see the range of before and after. It gives me some hope that after some time of use (bordering on abuse) in my hands that a double can be restored to its former glory.
As mentioned I actually don't mind, almost prefer, a firearm that displays "feild-time".
Gives them that real work-horse look.
What about that Lang then ? (what year of make is it ?).
What are you shooting through it ?
What does it weigh (I'm partially obsessed with rifle carry weight !) ?
What length tubes ? (have you chrony'd loads through it).
If V.C had said that they could absolutely NOT bring a .500 under finished weight of 11lbs I was going to go with a .470 of 10 lbs.
03-30-2012, 02:02 AM #26
paul i started a new thread under double rifles, the pics have come through this time!
05-31-2012, 11:07 AM #27
hey paul i was wondering if your rifle is with you or heading your way, and when do you head for the bush to start your season?
06-01-2012, 01:23 AM #28
I'll be heading up to camp in the next couple of weeks, so the double hasn't made it in time for this season.
In all fairness, the good gents at V.C did say that they would be hard pressed to get it in time for me as it was ordered at the Dallas convention in Jan giving them only 6 months to build, which is marginal (do-able, but marginal).
So it will have to be for next year.
Still, I have waited for 45 years for this moment, another season won't kill me (we'll I certainly hope it doesn't !!!!!!!!!).
06-01-2012, 01:31 AM #29
well i suppose you have something else apart from getting home to look forward to have a good season.
06-01-2012, 03:59 AM #30
I've had two new bolt guns to prep, build-up loads for and get familiar with which has kept me distracted this passed off-season and it's been fun.
I'm really looking forward to getting out with these two new rifles this year and getting some runs on the board with them, but yes the double has been in the back of my mind the entire time.
I secretly hoped that it would make it for this season but it hasn't.
So when I get back there'll be another intense period of load testing, regulating, sighting and familiarity.
I've already begun collecting components and also have 60 factory loads to start of with and make some noise down the range with.
It's all good fun.
Thanks for the well wishes.
10-26-2012, 06:38 PM #31
11-01-2012, 01:36 AM #32
Well, after dreaming about it for half a lifetime, saving for it for another lifetime and waiting 10 months for the build I finally picked it up today !
Initial impressions exceeded my expectations.
The quality of wood used is quite impressive, fit and finish outstanding, excecution of both engraving and checkering is at very least excellent.
Finished weight; 10.7 lbs, balanced very well "between the hands".
Over-all standard of workmanship is outstanding.
Regulation target supplied, fired with Hornady factory ammo as requested, shows left and right horizontally level with the aiming point and just on an inch apart at 50 meters (not yards).
I will post some pics over the coming week-end.
11-01-2012, 02:02 AM #33
great to see it has finally arrived. it sounds very, very nice so dont hang around get some photos on here. when are you going to shoot it? and finally welcome to the double club
11-01-2012, 02:23 AM #34
I want to do V.C and the gun justice by taking my time and taking some nice pics that reflect the workmanship so please bare with me for a couple of days.
Not quite sure as to when I'll get the chance to shoot it as everything is quite rushed here at the momnet as we prepare for Dallas.
I really don't know how it will appeal to others as I requested a few "non-conventional" personal touches, but to me the rifle is exquisite to look at and handles like a dream.
Check back in about two or three days and I'll have some pics up.
11-01-2012, 02:36 AM #35
no probs, and its how it looks and feels to you that counts, and it sounds like it ticks all the right boxes.
11-01-2012, 02:56 AM #36"We sleep peaceably in our beds because rough men stand ready in the
night to visit violence on those who would do us harm" Winston Churchill
11-03-2012, 03:56 AM #37
Well I guess I discovered today that taking pictures of guns isn't as easy and straight forward as I thought.
I really wanted to try and do a good job of it not to show off but to highlight the quality fo workmanship produced by the V.C factory.
Anyhow, I'll post what i've got and hopefully you'll get the drift.
11-03-2012, 05:06 AM #38
very nice paul. guess i def wont be getting it for christmas then.....enjoy.
12-13-2012, 05:49 PM #39
- bebo has no Articles
- bebo has no Photos
12-13-2012, 07:01 PM #40